• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.329.2-329.2
• /
• 2014

지난 수년간 태양전지의 광전변환효율을 높이기 위해 자가 조립된 InAs 또는 GaSb와 같은 양자점을 GaAs 단일 p-n 접합에 적용하는 연구를 개발해 왔다. 그러나 양자점의 흡수 단면적에 의한 광 흡수도는 양자점층을 수십 층을 쌓으면 증가하지만 활성층에 결함을 생성시킨다. 생성된 결함은 운반자트랩으로 작용하여 태양전지의 광전변환효율을 감소시킨다. 본 실험에서는 양자점이 적용된 태양전지와 적용되지 않은 태양전지의 광전변환 효율을 비교하고, 깊은준위 과도용량 분광법을 이용하여 결함상태를 측정 및 비교함으로써, 활성층 내부에 생성된 결함이 광전변환 효율에 미치는 영향을 분석하였다. 소자구조는 분자선 증착 방법을 이용하여, 먼저 n+-형 GaAs기판위에 n+-형 GaAs를 250 nm 증착한 후, 도핑이 되지 않은 GaAs활성층을 $1{\mu}m$ 두께로 증착하였다. 마지막으로 n+ 와 p+-형 GaAs를 각각 50, 750 nm 증착함으로써 p-i-n구조를형성하였다. 여기서, n+-형 GaAs 과 p+-형 GaAs의 도핑농도는 동일하게 $5{\times}1018cm-3$로 하였다. 또한 양자점을 태양전지 활성층에 20층을 형성하였다. 이때 p-i-n 태양전지 와 양자점 태양전지의 광전변환 효율은 각각 5.54, 4.22 % 를 나타내었다. p-i-n 태양전지의 개방 전압과 단락전류는 847 mV, 8,81 mA이며 양자점 태양전지는 847 mV, 6.62mA로 확인되었다. 태양전지의 전기적 특성을 측정하기 위해 소자구조 위에 Au(300nm)/Pt(30nm)/Ti(30nm)의 전극을 전자빔증착장치로 증착하였으며, 메사에칭으로 직경 $300{\mu}m$의 태양전지 구조를 제작하였다. 정전용량-전압 특성 및 깊은준위 과도용량 분광법을 이용하여 태양전지의 결함분석 및 이에 따른 광전변환 특성인자와의 상관관계를 논의할 것이다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.5
• /
• pp.78-87
• /
• 2012

This study is for developing a system for electro-deposition utilizing sea water containing various ions like calcium and magnesium. This is the first step research for the final goal which is a development of anti-corrosive steel for RC structure, so that this paper is mainly focused on the development for electro-deposition system. Optimum conditions for steel coating is obtained through various tests considering anode type, temperature, duration time, and current density. The composition of electro-deposition is analyzed through SEM, EDS, and XRD and it is evaluated to be $CaCO_3$ and $Mg(OH)_2$. Through measuring polarization potential and current density in the coated steel, the coating layer from the developed system is evaluated to have high resistance to steel corrosion. Additional tests and discussions on durability and structural performance in the coated steel from this work will be performed for the second step research.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1979.05a
• /
• pp.4.3-4
• /
• 1979

In the cases of the experimentally destroyed receptor organ of the Corti of the cats, "electric cochlea" were inserted near the auditory neuron through the Scala tympani as an input of the inner device, and outer device is placed near the receiver of the audiometer. During exposing noise through the outer device, kymographic record were obtained as following: 1) Correlation between increasing intensity and amplitude showed parallel responses 2) The auricular reflex by repeated stimulation of the sound showed considerable increase at first, and decrease respectively. 3) In this experimental animals, absolutely non-responsed period, relatively non-responsed period and responsed period were observed. 4) Above mentioned reflex indicate that "Auditory sensation" can be induced by inserted "Electric cochlea" in the cases of the experimentally destroyed receptor organ of Corti of the cats.

• Journal of Welding and Joining
• /
• v.32 no.1
• /
• pp.93-101
• /
• 2014

This study aims to investigate the effect of heat input of outside SAW weld on low temperature toughness($-20^{\circ}C$) of inside SAW weld for API 5L X70 with sour gas resistance. As increasing heat input of the outside weld, low temperature toughness of the inside weld was decreased. Especially, in spite of the same heat input, the value of low temperature toughness was fluctuated. On the basis of fracture and microstructure analysis, the low temperature toughness is correlated with the fracture area ratio of shear lips and four kinds of fracture sections. These sections were divided with size and shape of dimple correlated with grain boundary ferrite and cleavage correlated acicular and polygonal ferrite in grain. Therefore, it was seen that these sections were two of final solidification area in the inside weld and the outside weld, no reheated zone and reheated zone in the inside weld. In conclusion, it is thought that the difference of low temperature toughness at the same heat input is due to the fact that each of impact test specimens could have the different microstructure, even though the notch was machined under the error tolerance of 1mm. It is because the final solidification area of the inside weld is very narrow.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.5
• /
• pp.543-548
• /
• 2006

This paper is to be researched into ozone generation character of Bi-Ti-Si type high dielectric ceramic catalyst discharge tube. And conditions of basic experiment are the outside diameter of discharge tube : 52 mm, the length of discharge tube : 350 mm, the frequence : 900 Hz, the temperature of cooling water : $25^{\circ}C$, quantity of flow : 5, 10, 20 L/min, pressure : 1.2, 1.4, 1.6 atm, and distance of discharge gap : 0.4, 0.6, 0.8 mm. Ozone generation characteristics were measured to consumption power. At quantity of flow : 20 L/min, discharge gap : 0.6 mm, pressure : 1.6, and consumption power : 150 W, Maximum ozone generation efficiency of 175 g/kWh was obtained. And a range of maximum ozone generation efficiency was measured below the flow quantity of 20 L/min at below pressure of 1.6 atm. However, Maximum ozone generation efficiency was measured over the flow quantity of 20 L/min at over pressure of 1.6 atm.

• Composites Research
• /
• v.28 no.6
• /
• pp.383-388
• /
• 2015

Ionic Polymer-Metal Composite (IPMC) consisting of soft membrane plated by platinum electrode layers on both surfaces generates electric energy when subjected to various mechanical stimuli. The paper proposes a circuit model that describes the physical composition of IPMC to predict the voltage generation characteristic corresponding to bending motion. The parameter values in the model are identified to minimize the RMS error between the real and simulated outputs. Following the design of IPMC circuit model, the state observer of the model is designed by using pole placement technique which improves the model accuracy. State observer design technique is also applied to find the inverse model which estimates the input bending angles from the output voltage data. The results show that the inverse model estimates input bending angles fairly well enough for the further applications of IPMC not only as an energy harvester but also as a bending sensor.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.3
• /
• pp.157-161
• /
• 2000

In order to investigate the substrate effect on the electrochemical properties of thin-film electrode, $LiCoO_2$ was deposited onto the alumina, chemically etched-Si and flat-Si substrates. After annealing at $800^{\circ}C$ in $O_2$ for 30min, the film deposited on the alumina consisted of large particles with several cracks, whereas the film deposited on the flat-Si substrate was composed of very small and uniform particles. The films deposited on the flat-Si showed improved electrochemical properties such as peak potential divergence and rate-capability, over those deposited on the alumina and chemically etched-Si substrate, which can be attributed to the differences of the particle size surface morphology, and the electrical resistance of the current collector.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.12
• /
• pp.1050-1057
• /
• 2015

This paper presents the characteristics of broadband double-cone antennas. The antenna is used to measure electromagnetic fields(2~5 GHz) radiated from a primary or a secondary electrode of a pole-transformer when partial discharge occurs inside the pole-transformer. The theoretical analysis is conducted using commercial software based on a finite difference time domain(FDTD) method. The parameters are a radius, and a height of the broadband double-cone antennas, and the number of posts on a ground plane. This paper examines influences of structural parameters of the broadband double-cone antennas on return loss. The results show that a condition for an optimum structure of broadband double-cone antennas exists. It also shows that the broadband double-cone antennas have radiation patterns similar to those of a dipole antenna. Therefore the broadband double-cone antennas are appropriate for the measurement of radiated electromagnetic fields from the pole-transformer. To verify the theoretical analysis, computed results are compared to experimental results.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.4
• /
• pp.149-156
• /
• 2019

A stretchable thermoelectric module consisting of 5 pairs of Bi₂Te₃-based hot-pressed p-n thermoelectric legs was processed by filling the module inside with polydimethylsiloxane (PDMS) and removing the top and bottom substrates. Its stretchable characteristics and power generation properties were measured. The integrity of the module was kept well even after 10 strain cycles ranging from 0 to 0.1. With increasing the tensile strain to 0.2, the module circuitry became open because of joint failure between Cu electrodes and thermoelectric legs. The stretchable thermoelectric module exhibited an open circuit voltage of 4.6 mV with a temperature difference of 2.2K across both ends of thermoelectric legs, and changes in its open circuit voltage were below 5% for tensile strains of 0~0.1. Being elongated for a strain of 0.1, it exhibited the maximum output power of 18.5 ㎼ with the temperature difference of 2.2K across its both ends.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.2
• /
• pp.69-74
• /
• 1999

Graphite and carbonaceous materials intercalate and deintercalate Li-ion reversibly into their layered structures. These materials show an excellent capacity for using a negative electrode in Li-ion batteries, because the electrochemical potential of Li-ion intercalated carbon is almost identical with that of lithium metal. Carbon used in this study was obtained by the pyrolysis of petroleum pitch, and heat-treated at the several temperatures between $700^{\circ}C$ and $1300^{\circ}C$. XRD analysis revealed that crystallization of carbon increased with increasing the heat treatment temperature. Charge/discharge properties were studied by a constant-current step at the rate of 0.1C, and the interfacial reaction between the electrolyte and the surface of carbon electrode was studied by cyclic voltammetry. Cell capacities were investigated in terms of the heat treatment temperature and the cycle number. Reversible capacity increased with the heat treatment temperature up to $1000^{\circ}C$, thereafter decreased continuously. Also, charge capacity decreased with the cycle number, while the reversibility improved with it.