• Korean Journal of Agricultural Science
• /
• v.36 no.1
• /
• pp.73-85
• /
• 2009

An investigation was conducted to get the basic data for establishing structural safety and environmental management of tomato greenhouses in Chungnam region. The contents of the investigation consisted of actual state of greenhouse structures and environmental control facilities. Most of greenhouses were arch type single-span plastic houses and they had too low height for growing tomatoes. Frameworks of multi-span greenhouses were suitable, but those of single-span were mostly insufficient. Every greenhouse had thermal curtain movable or covering fixed inside the greenhouse for energy saving, and heating facilities were mostly warm air heater. Irrigation facilities were mostly drip tube and controlled by manual operation or timer. Almost all of the greenhouses didn't install high level of environmental control facilities such as ventilator, air circulation fan, $CO_2$ fertilizer, insect screen, supplemental light, and cooling device.

• Journal of Korean Society of Environmental Engineers
• /
• v.28 no.5
• /
• pp.463-471
• /
• 2006

Electrical resistivity surveys were conducted at areas of abandoned landfills in Cheonan and Wonju. Geology and extent of leachate migration around the landfills were evaluated with collected resistivity data by 2-D and 3-D resistivity inverse modeling. The Cheonan landfill is located above the paddy fields and the resistivity survey lines were crossed to examine possible pollution at the paddy fields by leakage of the landfill leachate. In Wonju, the landfill and the downgradient paddy fields are divided by a concrete barrier wall. At the bottom of the landfill, there is a leachate settlement system, which has not been in operation. To evaluate leachate leakage into the paddy fields, a total of 4 survey lines were used. According to the resistivity survey results, the landfill leachate in Cheonan appeared to be restricted only within the interior of the landfill, not to migrate into the subsurface of the paddy fields. These results are well consistent with electrical conductivity values of groundwaters obtained from a periodic analysis of water qualities. In Wonju, however, it was inferred that the leachate emanating from the landfill migrated beneath the abandoned leachate settlement system and the leachate would reach the downgradient paddy fields. Low resistivity area was observed in the old reservoir area and it appeared to be derived from convergence of groundwater flows from the surrounding valley and the moist wet land. In addition, groundwater flow into the paddy fields occurs beneath the old reservoir embankment at depths of $7{\sim}8m$. This paper reports details of the resistivity surveys for the uncontrolled landfills.

• Journal of Korean Society of Forest Science
• /
• v.43 no.1
• /
• pp.6-13
• /
• 1979

In order to substract the time and cost of propagation for inducing the haploid plants per each species. 500 anthers of late uninucleate microspore on early binucleate microspore stage of Robinia pseudoacacia (Fuel tree) Punius granatum (Ornamental tree). Aleurites fordii (Faty tree) and Styrax japonica (Silvicultural tree) were cultured on the modified Murashige and Skoog's medium supplemented with Kinetin, 2.4-D and NAA as growth regulators. And I observed the samples of cultured anthers under the microscope which were made by Microtoming method and Paraffin method. The results were summarized as follows: 1) Among 500 cultured anthers per each species, anther numbers inducing the diploid callus were as follow: Styrax japonica 20 (4% for the species total); Aleurites fordii 10 (2% for the species, total) and Punica granatum 45 (9% for the species total) were showed. 2) 2n Callus were induced from anther wall. but haploid callus were induced from anther locule. 3) Haploid callus were induced only in 25 anthers (5% for the species total) of Robinia pseudoacacia. 4) These haploid callus were not originated from body cell of anther wall tissue, but from reduced microspores, 5) Since already reported many herbaceous haploid plants were induced from the callus which were originated from reduced microspores, I conclude that the anther of woody plant which induced the haploid callus also will be cultured haploid plant.

• Journal of Bio-Environment Control
• /
• v.27 no.3
• /
• pp.253-259
• /
• 2018

This study set out to select a system to realize an optimal environment for strawberry cultivation greenhouses based on data about the growth and development of strawberry and its environment and to provide basic data for the research of its improved productivity. For these purposes, the investigator conducted a field survey with greenhouses for strawberry cultivation in western Gyeongnam. The findings show that farmers in their fifties and sixties accounted for the biggest part in the age groups of strawberry farmers. While those who were under 50 were accounted for approximately 67.5%, those who were 60 or older accounted for 32.5%. As for cultivation experiences, the majority of the farmers had ten years of cultivation experiences or less with some having 30 years of cultivation experiences or more. All the farmers built an arch type single span greenhouse. Those who used nutrient solutions were about 75.0%, being more than those who used soil. All of the farmers that used a nutrient solution adopted an elevated hydroponic system. The single span greenhouses were in the range of 7.5~8.5m, 1.3~1.8m and 2.5~3.5m for width, eaves, and ridge height, respectively, regardless of survey areas. The rafters interval was about 0.7~0.8m. In elevated hydroponic cultivation, the width, height, and interval of the beds were about 0.25m, 1.2m and 1.0m, respectively. As for the strawberry varieties, the domestic ones accounted for approximately 97.5% with Seolhyang being the most favorite one at about 65.0%. As for the internal environment factors of greenhouses, 38 farmers measured only temperature and relatively humidity. As for hydroponics, the farmers used a hydroponics control system. Except for the farmers that introduced a smart farm system for temperature and humidity control, approximately 85.0% controlled temperature and humidity only with a control panel for side windows and ventilation fans. As for heating and heat insulation, all of the farmers were using water curtains with many farmers using an oil or electric boiler, radiating lamp or non-woven fabric, as well, when necessary.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.2
• /
• pp.115-123
• /
• 2013

Stoker type incinerator is one of the most popular one used as municipal solid waste (MSW) incineration because, in general, it is quite suitable for large capacity and need no preprocessing facility. Nowadays, however, since the combustible portion of incoming MSW increases together with the decrease of the moisture content due to prohibition of directly burying food waste in landfill, the heating value of waste is remarkably increasing in comparison with the early stage of incinerator installation. Consequently, the increased heating value in incinerator operation causes a number of serious problems such as reduction of waste amount to be burned due to the boiler heat capacity together with the significant NO generation in high temperature environment. Therefore, in this study, a series of numerical simulation have been made as parameters of waste amount and the fraction of moisture in air stream in order to investigate optimal operating condition for the resolution of the problems associated with the high heating value of waste mentioned above. In specific, a detailed turbulent reaction flow field calculation with NO model was made for the full scale incinerator of D city. To this end, the injection method of moisturized air as oxidizer was intensively reviewed by the addition of moisture water amount from 10% and 20%. The calculation result, in general, showed that the reduction of maximum flame temperature appears consistently due to the combined effects of the increased specific heat of combustion air and vaporization heat by the addition of water moisture. As a consequence, the generation of NOx concentration was substantially reduced. Further, for the case of 20% moisture amount stream, the afterburner region is quite appropriate in temperature range for the operation of SNCR. This suggests the SNCR facility can be considered for reoperation. which is not in service at all due to the increased heating value of MSW.

• The Journal of the Petrological Society of Korea
• /
• v.25 no.3
• /
• pp.211-230
• /
• 2016

Detailed mapping along the Keumwang fault reveals a complex history of multiple brittle reactivations following late Jurassic and early Cretaceous ductile shearing. The fault core consists of a 10~50 m thick fault gouge layer bounded by a 30~100 m thick damaged zone. The Pre-cambrian gneiss and Jurassic granite underwent at least six distinct stages of fault movements based on deformation environment, time and mechanism. Each stage characterized by fault kinematics and dynamics at different deformation environment. Stage 1 generated mylonite series along the Keumwang shear zone by sinistral ductile shearing during late Jurassic and early Cretaceous. Stage 2 was a mostly brittle event generating cataclasite series superimposed on the mylonite series of the Keumwang shear zone. The roundness of pophyroclastes and the amount of matrix increase from host rocks to ultracataclasite indicating stronger cataclastic flow toward the fault core. At stage 3, fault gouge layer superimposed on the cataclasite generated during stage 2 and the sedimentary basins (Umsung and Pungam) formed along the fault by sinistral strike-slip movement. Fragments of older cataclasite suspended in the fault gouge suggest extensive reworking of fault rocks at brittle deformation environments. At stage 4, systematic en-echelon folds, joints and faults were formed in the sedimentary basins by sinistral strike-slip reactivation of the Keumwang fault. Most of the shearing is accommodated by slip along foliations and on discrete shear surfaces, while shear deformation tends to be relatively uniformly distributed within the fault damage zone developed in the mudrocks in the sedimentary basins. Fine-grained andesitic rocks intruded during stage 4. Stage 5 dextral strike-slip activity produced shear planes and bands in the andesitic rocks. ESR(Electron Spin Resonance) dates of fault gouge show temporal clustering within active period and migrating along the strike of the Keumwang fault during the stage 6 at the Quaternary period.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.1092-1099
• /
• 2022

Research on exhaust aftertreatment devices to reduce air pollutants and greenhouse gas emissions is being actively conducted. However, in the case of the particulate matters/nitrogen oxides (PM/NOx) simultaneous reduction device for ships, the problem of back pressure on the diesel engine and replacement of the filter carrier is occurring. In this study, for the optimal design of the integrated device that can simultaneously reduce PM/NOx, an appropriate standard was presented by studying the flow inside the device and change in back pressure through the inlet/outlet pressure. Ansys Fluent was used to apply porous media conditions to a diesel particulate filter (DPF) and selective catalytic reduction (SCR) by setting porosity to 30%, 40%, 50%, 60%, and 70%. In addition, the ef ect on back pressure was analyzed by applying the inlet velocity according to the engine load to 7.4 m/s, 10.3 m/s, 13.1 m/s, and 26.2 m/s as boundary conditions. As a result of a computational fluid dynamics analysis, the rate of change for back pressure by changing the inlet velocity was greater than when inlet temperature was changed, and the maximum rate of change was 27.4 mbar. This was evaluated as a suitable device for ships of 1800kW because the back pressure in all boundary conditions did not exceed the classification standard of 68mbar.

• Geophysics and Geophysical Exploration
• /
• v.26 no.1
• /
• pp.18-30
• /
• 2023

Submarine mud volcanos are topographic features that resemble volcanoes, and are formed due to eruptions of fluidized or gasified sediment material. They have gained attention as a source of subsurface heat, sediment, or hydrocarbons supplied to the surface. In the continental slope of the Canadian Beaufort Sea, mud volcano exists at various water depths. The MV420, is an active mud volcano erupting at a water depth of 420 meters, and it has been the subject of extensive study. The Korea Polar Research Institute(KOPRI) collected high-resolution seismic data and heat flow data around the caldera of the mud volcano. By analyzing the multi-channel seismic data, we confirmed the reverse-polarity reflector assumed by a gas hydrate-related bottom simulating reflector(BSR). To further elucidate the relationship between the BSR and gas hydrates, as well as the thermal structure of the mud volcano, a numerical geothermal model was developed based on the steady-state heat equation. Using this model, we estimated the base of the gas hydrate stability zone and found that the BSR depth estimated by multi-channel seismic data and the bottom of the gas hydrate stability zone were in good agreement., This suggests the presence of gas hydrates, and it was determined that the depth of the gas hydrate was likely up to 50 m, depending on the distance from the mud conduit. Thus, this depth estimate slightly differs from previous studies.

• (The) Research of the performance art and culture
• /
• no.41
• /
• pp.257-284
• /
• 2020

Goseong Ogwangdae started academic research in the late 1950s and was designated as a national intangible cultural asset in 1964. From the time of the academic survey to the time of designation, it was recorded as using paper masks, but when the recording image was filmed in 1965, it was already changed to wooden masks. In 1960, before being designated as an intangible cultural asset, the number of masks, which was 9 points, gradually increased to 19 points in 1964. It is necessarily included in the leper, Chorani, Malttuki, Cheongbo-Yangyang, Halmi, and Jemilju, but the character of the yangban is not yet clearly differentiated. Hwangbongsa and Sangju appeared as bare faces, and consumption, milling, Cheongbo-Yangyang are used together with Bibi and inspiration. It can be guessed that Bibi was not the appearance of a foreign object with horns as it is now, considering that Bibi and Madangsoi were used together. Since 1965, shortly after the designation, the whole of the Goseong Ogwangdae mask has been changed to a wooden mask. All the characters except for resident, courtyard, and top-of-the-line are wearing masks. Bibi, Hongbaek, and service masks have never appeared until 1964. The Yangban was changed to the closing ceremony with six people in the order of Won-Yangban, Baekje, Heukje, Cheongje, Hongbaek, and Jonggadoryong. Starting in 1969, the mask enters the stable period where the kind is the same as the present. Bibi-Yangban uses both the Won-Yangban and the Jemilju uses the Somu, but all other characters use the individual mask to use a total of 18 masks. The Yangbans are clearly differentiated, and a total of seven Yangban appear. The reason why the change in the type of mask and the expression of material is so large is that the first generation of mask makers died and the tradition of mask production was cut off, but there is also a cause of the extreme change in the environment of the drama that the performers who joined after the designation had to face. Also, it is closely related to the change of the times when the meaning and weight of masking in masking has changed. At that time, the performers were not so tied to the current concept of 'original form' that they preserved the appearance of the designated time. Originally, Goseong Ogwangdae was centered on improvisation dance, not the formalized dance as it is now, and there was a certain fluid aspect in the retelling, so it was flexible in the use of masks even before the designation of cultural assets. Strict rules did not apply in the details, as it was a self-sufficient play by the performers, not an offer event. The form and contents of this fluid play are changed to preparation for the performance while preparing for the folk art contest. As the subject of the contest in self-sufficient play, dance, costumes, and props became more and more colorful as well as dancing, costumes, and props. As a result, participation in the contest brought about changes in the overall performance and changed the mask, which was accepted within the preservation society.

• Journal of Popular Narrative
• /
• v.25 no.1
• /
• pp.349-392
• /
• 2019

In the 1960s of Korea, the normalization of diplomatic relations between Korea and Japan led to a sense of a vigorous anxiety and fear that "Japan will once again come to the Korean peninsula". As a reaction to this, the discourse on the criticism of 'Japanese Style' strongly emerged. If the prior discourse of criticism was to express the national antipathy toward the colonial remnants that had not yet been disposed of, the critical discourse of the 1960s was the wariness of the newly created 'Japanese Style' in popular culture, and to grasp it as a symptomatic phenomenon that 'evil-minded Japan' was revealed. Thus, this new logic of criticism of the 'Japanese Style' had a qualitative difference from the existing ones. It was accompanied by a willingness to inspect and censor the 'masses' that grew up as consumers of transnational 'mass culture' that flowed and chained in the geopolitical order under the Cold War system. Therefore, the topology of 'popular things=Japanese things=consuming things' reveals the paradox of moral demands that existed within Korean society in the 1960s. This was to solidify the divisive circulation structure that caused them to avoid direct contact with the other called 'Japan', but at the same time, get as close to it as ever. It is a repetitive obsession that pushes the other to another side through the moral segregation that strictly draws a line of demarcation between oneself and the other, but on the other hand is attracted to the object and pulls it back to its side. This paper intends to listen to the different voices that have arisen in the repetitive obsession to understand the significance of the dissonance that has been repeated in the contemporary era. This will be an examination of the paradoxical object of Japan that has been repeatedly asked to build the internal control principle of Korean society, or to hide the oppressive and violent side of the power, and that can neither be accepted nor destroyed completely as part of oneself.