• Journal of radiological science and technology
• /
• v.34 no.3
• /
• pp.239-244
• /
• 2011

In this study, we evaluated diffusion weighted imaging (DWI) to investigate whether the DWI parameters can predict characteristic parameters on pathologic specimens of tumor or not. CFPAC-1 was injected subcutaneously on the back flank of athymic nude mice (n=13) then two tumors were initiated on each mouse (2${\times}$13=26 tumors). The mice were sacrificed to make specimen immediately after initial MR imaging then were compared with the MR image. A dedicated high-field (7T) small-animal MR scanner was used for image acquisitions. A T1 and T2 weighted axial image using RARE technique was acquired to measure the T2 values and tumor size. DWI MR was performed for calculating ADC values. To evaluate tumor cellularity and determine the levels of MVD, tumor cells were excised and processed for H-E staining and immunostaining using CD31. T2 values and ADC values were computed and analyzed for each half of the tumors and compared to the correlated specimens slide. Median ADC within each half of mass was compared to the cellularity and MVD in the correlated area of pathologic slide. The mean of ADC value is $0.7327{\times}10^{-3}$ $mm^2/s$ and standard deviation is $0.1075{\times}10^{-3}$ $mm^2/s$. There is a linear relationship between ADC value and tumor necrosis (R2=0.697, p< 0.001). DW image parameters including the ADC values can be utilized as surrogate markers to assess intratumoral neoangiogenesis and change of the internal structure of tumor cells.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.3
• /
• pp.543-560
• /
• 2018

With the increased development in downtown underground space facilities that vertically cross under a railway at a shallow depth, the demand for non-open cut method is increasing. However, most construction sites still adopt the pipe roof method, where medium and large diameter steel pipes are pressed in to form a roof, enabling excavation of the inside space. Among the many factors that influence the loosening region and loads that occur while pressing in steel pipes, the size of the pipe has the largest impact, and this factor may correspond to the magnitude of load applied to the underground structure inside the steel pipe roof. The super equilibrium method (SEM) has been developed to minimize ground disturbance and loosening load, and uses small diameter pipes of approximately 114 mm instead of conventional medium and large diameter pipes. This small diameter steel pipe is called an SEM pile. After SEM piles are pressed in and the grouting reinforcement is constructed, a crossing structure is pressed in by using a hydraulic jack without ground subsidence or heaving. The SEM pile, which plays the role of timbering, is a fore-poling pile of approximately 5 m length that prevents ground collapse and supports surface load during excavation of toe part. The loosening region should be adequately calculated to estimate the spacing and construction length of the piles and stiffness of members. In this paper, we conducted a comparative analysis of calculations of loosening load that occurs during the press-in of SEM pile to obtain an optimal design of SEM. We analyzed the influence of factors in main theoretical and empirical formulas applied for calculating loosening regions, and carried out FEM analysis to see an appropriate loosening load to the SEM pile. In order to estimate the soil loosening caused by actual SEM-pile indentation and excavation, a steel pipe indentation reduction model test was conducted. Soil subsidence and soil loosening were investigated quantitatively according to soil/steel pipe (H/D).

• Journal of Bio-Environment Control
• /
• v.15 no.4
• /
• pp.306-316
• /
• 2006

In this study, the effect of the shade level, water flow rate applied to the shades and the temperature of water on the greenhouse cooling was investigated depending on the shade level of 0, 35, 55, 75%, and water flow rate and water temperature by the test on the small wooden frames to find out the low cost cooling method. With increasing of the dry bulb temperature of outside air, the dry bulb temperature in the wooden frames increased. For the frames with the shade and water, inside temperatures of the frames were lower of -0.2$\sim$-1.2$^{\circ}C$ than the temperature of the outside air and higher than the water temperature. For the frames without water, inside temperatures of the frames were higher of 1.7$\sim$4$^{\circ}C$ than the outside and not affected by the shade level very much. The water flow rate and the temperature of the water were not the important factors to decrease the inside temperatures in the frames. The black globe temperature became lower with increasing of shade level. The shade frames with water curtain showed the best cooling effect because of reducing thermal radiation and cooling the plastic film cover. The surface temperatures of the plastic film cover for the water supplied modules became lower with increasing of the shade level. The relative humidity was decreased with the dry bulb temperature in the frame increasing and not affected by the dry bulb temperature of the outside air for the frames with the shade and water.

• Korean Journal of Environment and Ecology
• /
• v.12 no.3
• /
• pp.259-270
• /
• 1998

This study, as an essential research to develope a mountainous runoff model, was conducted to clarify the hydrologic character and water budget equation of Pinus densiflora and Quercus acutissima. Net rainfall quantity division for two species was investigated at Youngsung experiment forest and Yeungnam University for 30 months(Sep. 1995-Jun. 1998). The results were summarized as follows; 1. The percentages of throughfall and stemflow to gross precipitation are 73.8% and 0.8% in the Pinus densiflora, and 76.9% and 3.8% in the Quercus acutissima, respectively 2. In the Pinus densiflora, regression fomula of stemflow, throughfall, and net rainfall to gross precipitation are S$_{f}$ = 0.01GP-2.05 ($r^2$=0.54) T$_{f}$ = 0.79Gp - 26.04 ($r^2$=0.92), N$_{r}$ = 0.81Gp - 28.09 ($r^2$=0.92). Stemflow and throughfall increased in direct proportion to gross precipitation. 3. In the Quercus acutissima, regression fomula of stemflow, throughfall, and net rainfall to gross precipitation are S$_{f}$ = 0.03Gp + 12.25 ($r^2$=0.74), T$_{f}$ = 0.78Gp + 19.75 ($r^2$=0.96), N$_{r}$ = 0.81Gp + 3199 ($r^2$=0.96), respectively. Comparing with two species, gross precipitation has a much larger effect on the stemflow and throughfall of Quercus acutissima than those of Pinus densiflora. 4. In the analysis of intercorrelation between stemflow and throughfall of each species and crown area(CA), diameter at breast height(DBH), and gross precipitation(Gp), correlation coefficient was higher by following order at each species; Gp>CA>DBH on stemflow of Pinus densinora, Gp>DBH>CA on stemflow of Quercus acutissima, and Gp>CA>DBH on throughfall of Pinus densiflora and Quercus acutissima.ssima.

• Food Science of Animal Resources
• /
• v.25 no.4
• /
• pp.365-372
• /
• 2005

This study was carried out to investigate the Physiochemical Properties of loin and rump in the native horse meat from Jeju. In the analysis of chemical composition of loin and rump, the result showed $72.2\%\;and\;73.8\%$ in moisture content $20.1\%\;and\;21.2\%$ in crude protein, $2.42\%\;and\;3.08\%$ in crude Int and $0.13\%\;and\;0.14\%$ in crude ash respectively. Glutamic acid was 3,275mg/100g and 3,577mg/100g in loin and rump each and it had highest result in amino acid analysis. K content was 388.0mg/100g which showed highest result in mineral analysis and next contents were P>Na>Mg>Ca. Oleic acid had highest result in fatty acid composition which were $62.64\%\;and\;63.77\%$ in loin and rump respectively. Cholesterol content of loin and rump were 43.25 and 43.57 mg/100g but showed no significant differences to the part. pH of loin and rump were 5.60 and 5.75 which had no significant differences. Loin had Higher result than that of rump with no significant differences in WHC and springiness of texture analysis. Redness of rump was higher than that of loin. In the sensory evaluation, there were significant differences in the color and odor. Loin had higher result than that of rump in the overall palatability but showed no significant differences. With the result of this experiment native horse meat from Jeju could be understood as good meat resources.

• Journal of radiological science and technology
• /
• v.35 no.4
• /
• pp.345-352
• /
• 2012

As the breast cancer rate is increasing fast in Korean women, people pay more attention to mammography and number of mammography have been increasing dramatically over the last few years. Mammography is the only means to diagnose breast cancer early, but harms caused by radiation exposure shouldn't be overlooked. Therefore, it is important to calculate the radiation dose being absorbed into the breast tissue during the process of mammography for a protective measure against radiation exposure. Because it is impossible to directly measure the radiation dose being absorbed into the human body, statistical calculation methods are commonly used, and most of them are supposed to simulate the interaction between radiation and matter by describing the human body internal structure with anthropomorphic phantoms. However, a simulation using Geant4 Code of Monte Carlo Method, which is well-known as most accurate in calculating the absorbed dose inside the human body, helps calculate exact dose by recreating the anatomical human body structure as it is through the DICOM file of CT. To calculate the absorbed dose in the breast tissue, therefore, this study carried out a simulation using Geant4 Code, and by using the DICOM converted file provided by Geant4, this study changed the human body structure expressed on the CT image data into geometry needed for this simulation. Besides, this study attempted to verify if the dose calculation of Geant4 interlocking with the DICOM file is useful, by comparing the calculated dose provided by this simulation and the measured dose provided by the PTW ion chamber. As a result, under the condition of 28kVp/190mAs, the Difference(%) between the measured dose and the calculated dose was found to be 0.08 %~0.33 %, and at 28 kVp/70 mAs, the Difference(%) of dose was 0.01 %~0.16 %, both of which showed results within 2%, the effective difference range. Therefore, this study found out that calculation of the absorbed dose using Geant4 Simulation is useful in measuring the absorbed dose in the breast tissue for mammography.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.8 no.1
• /
• pp.36-44
• /
• 2006

In this study, we constructed a forest fire danger map in the Yeongdong area of Gangwon-do and Northeastern area of Gyeongsangbuk-do using a forest fire rating model and geographical information system (GIS). We investigated the appropriate positions of the automatic weather station (AWS) and a comprehensive network solution (a system including measurement, communication and data processing) for the establishment of an optimum mountain meteorological observation network system (MMONS). Also, we suggested a possible plan for combining the MMONS with unmanned monitoring camera systems and wireless relay towers operated by local governments and the Korea Forest Service for prevention of forest fire.

• Journal of Climate Change Research
• /
• v.4 no.2
• /
• pp.115-126
• /
• 2013

Recently Korea considers the source of biomass burning emissions reflecting national characteristic, so that includes the inventory of emission source but preceding research is rarely implemented in Korea. Therefore, a study on characteristics of greenhouse gas emissions from biomass burning is necessary and it also makes the source management effectively when the climate-atmospheric management system takes effect. In this study, using the manufactured charcoal kiln and the number of experiment was three times to get a reliable experiment result. The sampling time was decided by changing degree in charcoal kiln and charcoal manufacturing process. The results of calculation greenhouse gas emission factor from charcoal kiln were $668g\;CO_2/kg$, $20g\;CH_4/kg$, $0.01g\;N_2O/kg$. Using the emission factor developed in this study, estimate the emissions from charcoal kiln in Korea. The results of calculation were $46,040ton\;CO_2/yr$, $1,378ton\;CH_4/yr$, $0.69ton\;N_2O/yr$ and greenhouse gas emissions applying GWP are as follows. $CH_4$ emissions was $28,947ton\;CO_2eq./yr$, $N_2O$ emissions was $214ton\;CO_2eq./yr$. As a results, Gross emissions of charcoal kiln in Korea was $75,201ton\;CO_2eq./yr$, but the oak used in this study is included to the biomass so emissions of $CO_2$ are excluded. Therefore the net emissions of charcoal kiln in Korea was $29,161ton\;CO_2eq./yr$.

• Journal of Service Research and Studies
• /
• v.13 no.1
• /
• pp.48-62
• /
• 2023

As seen in the recent K-pop craze, the size and influence of the Korean music industry is growing even bigger. At least 6,000 songs are released a year in the Korean music market, but not many can be said to have been successful. Many studies and attempts are being made to identify the factors that make the hit music. Commercial factors such as media exposure and promotion as well as the quality of music play an important role in the commercial success of music. Recently, there have been many marketing campaigns using Internet memes in the pop music industry, and Internet memes are activities or trends that spread in various forms, such as images and videos, as cultural units that spread among people. Depending on the Internet environment and the characteristics of digital communication, contents are expanded and reproduced in the form of various memes, which causes a greater response to consumers. Previously, the phenomenon of Internet memes has occurred naturally, but artists who are aware of the marketing effects have recently used it as an element of marketing. In this paper, the mediated effect of Internet memes in relation to the success factors of popular music was analyzed, and a prediction model reflecting them was proposed. As a result of the analysis, the factors with the mediated effect of 'cover effect' and 'challenge effect' were the same. Among the internal success factors, there were mediated effects in "Singer Recognition," the genres of "POP, Dance, Ballad, Trot and Electronica," and among the external success factors, mediated effects in "Planning Company Capacity," "The Number of Music Broadcasting Programs," and "The Number of News Articles." Predictive models reflecting cover effects and challenge effects showed F1-score at 0.6889 and 0.7692, respectively. This study is meaningful in that it has collected and analyzed actual chart data and presented commercial directions that can be used in practice, and found that there are many success factors of popular music and the mediating effects of Internet memes.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.18 no.1
• /
• pp.43-48
• /
• 2014

Purpose: In the PET/CT images, The SUV (standardized uptake value) enables the quantitative assessment according to the biological changes of organs as the index of distinction whether lesion is malignant or not. Therefore, It is too important to enter parameters correctly that affect to the SUV. The purpose of this study is to evaluate an allowable error range of SUV as measuring the difference of results according to input errors of Activity, Weight, uptake Time among the parameters. Materials and Methods: Three inserts, Hot, Teflon and Air, were situated in the 1994 NEMA Phantom. Phantom was filled with 27.3 MBq/mL of 18F-FDG. The ratio of hotspot area activity to background area activity was regulated as 4:1. After scanning, Image was re-reconstructed after incurring input errors in Activity, Weight, uptake Time parameters as ${\pm}5%$, 10%, 15%, 30%, 50% from original data. ROIs (region of interests) were set one in the each insert areas and four in the background areas. $SUV_{mean}$ and percentage differences were calculated and compared in each areas. Results: $SUV_{mean}$ of Hot. Teflon, Air and BKG (Background) areas of original images were 4.5, 0.02. 0.1 and 1.0. The min and max value of $SUV_{mean}$ according to change of Activity error were 3.0 and 9.0 in Hot, 0.01 and 0.04 in Teflon, 0.1 and 0.3 in Air, 0.6 and 2.0 in BKG areas. And percentage differences were equally from -33% to 100%. In case of Weight error showed $SUV_{mean}$ as 2.2 and 6.7 in Hot, 0.01 and 0.03 in Tefron, 0.09 and 0.28 in Air, 0.5 and 1.5 in BKG areas. And percentage differences were equally from -50% to 50% except Teflon area's percentage deference that was from -50% to 52%. In case of uptake Time error showed $SUV_{mean}$ as 3.8 and 5.3 in Hot, 0.01 and 0.02 in Teflon, 0.1 and 0.2 in Air, 0.8 and 1.2 in BKG areas. And percentage differences were equally from 17% to -14% in Hot and BKG areas. Teflon area's percentage difference was from -50% to 52% and Air area's one was from -12% to 20%. Conclusion: As shown in the results, It was applied within ${\pm}5%$ of Activity and Weight errors if the allowable error range was configured within 5%. So, The calibration of dose calibrator and weighing machine has to conduct within ${\pm}5%$ error range because they can affect to Activity and Weight rates. In case of Time error, it showed separate error ranges according to the type of inserts. It showed within 5% error when Hot and BKG areas error were within ${\pm}15%$. So we have to consider each time errors if we use more than two clocks included scanner's one during the examinations.