• Journal of the Speleological Society of Korea
• /
• no.70
• /
• pp.1-8
• /
• 2006

처마 끝에 열리는 고드름은 흔히 겨울철에 내린 눈이 지붕위에 쌓여 있다가 따사로운 햇살이 비치면 녹은 눈이 중력에 의해 흘러내리면서 영하의 찬 기류에 얼면서 성장하여 길게 매달린다. 그러나 땅바닥이나 물그릇 속에서 위로 자라 올라오는 역고드름은 특별히 그곳에서만 지상의 역 중력이 작용할 이유가 없기 때문에 간단히 해석되기가 쉽지 않다. 겨울밤에 정안수를 놋그릇에 떠놓고 공불기도를 올리다가 물이 어면서 나타나는 기이한 역 고드름은 물이 얼면서 생긴 표면의 숨구멍을 통하여 물보다 저밀도인 얼음의 체적이 불어서 밀려나오면서 생길 수 있으나, 이 현상만으로는 역고드름이 그렇게 크게 자랄 수가 얼다. 따라서 이 경우는 주변에서 불어오는 찬 기류가 지형지물에 부딪히면서 회오리쳐 소슬바람을 일으킬 때 일시적인 부압이 작용하여 그릇속의 물이 숨구멍을 통해 나오면서 얼어 성장되는 현상이 부가적으로 상승작용을 일으켜 길게 자라 올라온 것이다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.10
• /
• pp.4666-4672
• /
• 2011

Performance of NOx removal in SCR(Selective Catalytic Reduction) process depends on such various factors as catalyst factors (catalyst composition, catalyst form, space velocity, etc.), temperature of exhaust gas, and velocity distribution of exhaust gas. Especially the flow uniformity of gas stream flowing into the catalyst layer is believed to be the most important factor to influence the performance. In this research, the flow characteristics of a SCR process at design stage was simulated, using 3-dimensional numerical analysis method, to confirm the uniformity of the gas stream. In addition, the effects of guide vanes, baffles, and perforated plates on the flow uniformity for the inside and catalyst layer of the reactor were studied in order to optimize the flow uniformity inside the SCR reactor. It was found that the installation of a guide vane at the inlet duct L-tube part and the installation of a baffle at the upper part is very effective in avoiding chaneling inside the reactor. It was also found that additional installation of a perforated plate at the lower part of the potential catalyst layer buffers once more the flow for very uniform distribution of the gas stream.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.465-466
• /
• 2012

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1480-1486
• /
• 2011

After installation of platform screen door (PSD) in subway stations, particulate matters (PMs), which are originally ventilated through the platform, are accumulated inside the tunnel of the subway system. It deteriorates an air quality inside the tunnel. To ventilate the accumulated PMs inside the tunnel, the natural ventilator which are located inside the tunnel (namely, tunnel ventilation system) are used as only one circulation system. In addition, the installation of PSD can affect to the aerodynamic variations inside the tunnel, since the PSD system was not considered factor when the tunnel ventilation system was designed. However, the researches about the tunnel ventilation system have not been adequate. Therefore, this study is carried out with two objectives: 1) to measure the velocity of air current by the train-induced wind, when the train passes through the tunnel, and 2) to investigate the typical patterns of air current by quantitatively evaluating the characteristics of inflow/outflow of air current which passes through the natural ventilation system. This study can suggest the basic standard to newly design the tunnel of the subway system as well as the ventilation system.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.13 no.3
• /
• pp.27-33
• /
• 2009

A computational study has been performed out to evaluate the effect of a vertical porous barrier on the pressure oscillations in a supersonic cavity. The porous barriers with different perforations were vertically installed into a rectangular cavity at Mach numbers 1.50, 1.83 and 2.50. TVD finite difference MUSCL scheme was employed to solve the two-dimensional, unsteady, compressible Navier-Stokes equations. The present vertical porous barrier considerably altered the characteristics of the time-dependent shear layers that occur at the upstream edge of cavity and remarkably reduced the pressure oscillations inside the supersonic cavity. The present results showed that the effectiveness of passive control using the present porous vertical barrier is dependent on Mach number and the perforation of the porous barrier.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.63-63
• /
• 2017

비료 살포는 작물 생장 촉진을 위하여 반드시 필요한 작업이며 재배 관리의 반 이상을 차지하는 중요한 농작업이다. 비료 사용은 양분 공급과 토양의 물리 화학성 개선 등 여러 이점이 있으나 최근에는 과도한 비료 사용으로 양분의 불균형 등의 문제점이 대두되고 있다. 또한 수작업으로 비료를 살포할 시 유해한 성분이 피부에 흡수되고 작업 능률이 낮기 때문에 비료 살포기의 필요성을 가진다. 현재 시중에 판매되고 있는 비료 살포기는 고속의 기류를 이용하여 비료를 날리는 방법과 중력으로 낙하시키는 방법, 원심력을 가하여 멀리 날려 보내는 방법 등이 있다. 그 중 중력으로 낙하시키는 방법과 고속 기류를 사용하는 방법은 석회, 퇴비, 규산질 비료 살포에 부적절함으로 원심력을 이용한 비료 살포가 많이 사용된다. 하지만 원심력을 이용하여 날리는 방법은 구조가 단순하여 비료가 균일하게 확산되지 않고 트랙터의 이동 속도에 따라서 비료의 살포량이 달라진다. 그에 따라 과도한 비료 살포로 이어지며 토지 또한 양분의 불균형 등으로 환경의 문제점이 대두되고 있다. 국내에서는 균일 살포를 위하여 비료 살포기의 내부 날개의 각도를 조절하여 비료 살포의 패턴을 분석하는 연구가 진행되고 있다. 균일 살포의 중요성은 더욱 대두되고 있지만 현재 균일 살포에 대한 연구가 많이 부족한 상태이다. 본 연구에서는 기존의 비료 살포기에 균일 살포를 위한 설계 인자를 도출하기 위해 살포기를 분석하여 원심식 비료 살포기의 균일 살포를 위한 기초 자료로 활용하고자 한다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.1
• /
• pp.56-62
• /
• 2020

The purpose of this study is to observe the visualization of the flow field for air flow distributed in the car from the ventilation fan installed in the ceiling of the passenger elevator car through the numerical analysis using computational fluid dynamics. STAR-CCM+, which is a code used for the numerical analysis, was used to predict the airflow distribution inside the elevator car. The numerical analysis of the distribution of the air current in the elevator was carried out. As a result, the analysis results for each point and the visualization of the air current distribution and the temperature distribution in the elevator car and were obtained. It was found that heat transfer was actively occurring inside the car due to the influence of the flow field discharged from the ventilation vent installed in the ceiling in the elevator car, and especially the convection heat transfer of Model-2 was more active than that of Model-1. As a result, the temperature distribution inside the car was found to be relatively low. In addition, the temperature distribution at a cross-section of 1700mm height in the elevator car shows that Model-2 is the location of the ventilation vent which makes people feel more comfortable.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05a
• /
• pp.500-503
• /
• 2011

본 논문에서는 RTO 반응기의 최적 조업 조건을 도출하고자 현재 조업 중인 RTO 반응기 촉매층의 압력분포, 유속분포, 유선장, 체류시간, 온도분포 등에 대하여 분석하였고 최적의 조업 조건을 도출하기 위한 전상유체해석을 수행하였다. 전산 해석 결과, 현재 조업중인 반응기 촉매층의 축열재로 인한 압력손실은 크지 않은 것으로 나타났으며, 세라믹 필터 이후 유속은2-3 m/s로 특별한 편류없이 비교적 안정적 유속분포룰 보이고 있었다. 그러나 기류분포를 좀 더 개선하려고 한다면 설비 내부에 플래넘과 촉매층 접속 구간 연장 등의 방법을 고려할 수 있을 것으로 판단된다. 그러나 기류안내판이나 다공판 부착 등의 방법은 큰 효과는 없을 것으로 나타났다.

• Plant Journal
• /
• v.9 no.3
• /
• pp.48-52
• /
• 2013

In this study, the internal flow field of SCR Denitrification Plant was simulated by using Computational Fluid Dynamics(CFD). In order to analyze the uniformity of flow field, an interpretation on the pre-existing facilities was performed, and some moot points were identified and compensated through this analysis. The compensatory methods include the installation of the Porous Plate below the bottom of the Baffle to create uniform flow and also, and the Guide Vane was also placed in the bend of pipe to guide the flow uniformly. Lastly, the Baffle was installed to deduct equalized space distribution of the air flow, initially flowed into the SCR Plant.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.78-83
• /
• 2003

General algorithm is developed for the prediction of internal flow-induced noise. This algorithm is based on the integral formula derived by using the General Green Function, Lighthills acoustic analogy and Curls extension of Lighthills. Novel approach of this algorithm is that the integral formula is so arranged as to predict frequency-domain acoustic signal at any location in a duct by using unsteady flow data in space and time, which can be provided by the Computational Fluid Dynamics Techniques. This semi-analytic model is applied to the prediction of internal aerodynamic noise from a throttle valve in an automotive engine. The predicted noise levels from the throttle valve are compared with actual measurements. This illustrative computation shows that the current method permits generalized predictions of flow noise generated by bluff bodies and turbulence in flow ducts.