• Journal of KSNVE
• /
• v.8 no.3
• /
• pp.399-407
• /
• 1998

An investigation into the modal interaction of an autoparameteric systemunder broad-band random excitation is made. The specific system examined is a spring-pendulum system with internal resonance, which is known to be a good model for a variety of engineering systems, including ship motions with nonlinear coupling between pitching and rolling motions. By means of the Gaussian closure method the dynamic moment equations explaining the random responses of the system are reduced to a system of autonomous ordinanary differential equations of the first and second moments. In view of equilibrium solutions of this system and their stability we examine the system responses. The stabilizing effect of system damping is also examined.

• Journal of KSNVE
• /
• v.10 no.6
• /
• pp.1041-1047
• /
• 2000

The main objectives of this study are to examine the random response of a vibration absorber system with autoparametric coupling in the neighborhood of internal resonance by Gaussian closure and to compare the results with those obtained by Monte Carlo simulation. The numerical simulation is found to support the main features of the nonlinear modal interaction in the neighborhood of internal resonance conditions. While the Gaussian closure exhibits regions of multiple solutions in the neighborhood of internal resonance, the numerical simulation gives only one solution depending on the assigned initial conditions. The on-off intermittency phenomena of the cantilever mode is observed in the Monte Carlo simulation over a small range of parameter.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.9
• /
• pp.944-950
• /
• 2013

This paper is a study of a rain sensor using an open-ended coaxial cavity resonator which senses the amount of rain drops linearly. It shows that it will be used as a sensor to sense the amount of rain dropped on the windshield of an automobile based on the principle of varied resonant frequency and the loss according to the amount and characteristics of an dielectric lied on the open side of a resonator. The input and output ports are built in the both sides of the resonator and the input and output coupling probes are formed like 'ㄱ' shape. The response of rain drops were simulated by the radius of inner conductor of 2 mm, 5 mm, and 10 mm respectively and it showed that the raindrop was sensed most linearly and sensitively when the radius of inner conductor is 5 mm, We have measured that the resonant frequency have varied from 3.55 GHz to 3 GHz and the Q value have varied from 42.38 to 24.3 according to the variation of rain drop amount on the fabricated resonator. Therefore, it shows that the designed resonator can be applied as a rain sensor that measures the amount of rain drops linearly by using the resonant frequency as a measurement parameter.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.12
• /
• pp.992-995
• /
• 2018

The wireless charging of body-embedded medical instruments and wireless power transfer to various inside dielectric-materials is still a future technology that has not yet been achieved. This paper proposes methods for controlling the capacitance of the resonators and installing air pockets on the top and bottom sides of the resonators for optimal design, which considered efficiency and resonant frequency in accordance with the electromagnetic characteristics of the dielectric medium. In future, the results of this research will be utilized as the basic research data to design and restore resonant frequency of resonators embedded in various dielectric environments.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.2
• /
• pp.46-54
• /
• 2007

We have fabricated and characterized MMI (Multimode Interference) coupled ring resonator with the total internal reflection mirrors and the semiconductor optical amplifier for the integration of the WDM (Wavelength Division Multiplexing) system. The TIR (Total Internal Reflection) mirrors were fabricated by self-aligned process and had losses of about 0.71 dB per mirror. Coupling in and out of a resonator was achieved using the extremely small MMI couplers. The MMI length and width used in the experiment were $119{\mu}m$ and $9{\mu}m$, respectively. The resulting FSR (Free Spectral Range) and on-off ratio were approximately 1.333 nm (162 GHz) and 13 dB, respectively.

• Korean Journal of Optics and Photonics
• /
• v.14 no.1
• /
• pp.85-91
• /
• 2003

Intracavity frequency doubling of a single-mode Nd:YAG laser by using a nonplanar ring cavity is demonstrated. The nonplanar ring cavity consists of a Brewster-angled Nd:YAG crystal placed in a magnetic field, a KTP crystal, and two spherical mirrors. In this design the Nd:YAG block acts as both a nonreciprocal polarization rotator and a partial polarizer, and the nonplanar portion of the ring cavity, which is formed by a relative twist angle between the Brewster-angled end surfaces of the Nd:YAG block, serves as a reciprocal polarization rotator. An eigenpolarization theory for the cavity configuration is presented and suitable values of the relative twist angle for unidirectional operation are estimated. A single-mode output power of 22 ㎽ at 532 nm and an optical to optical conversion efficiency of 1.8% are obtained with a 1.2 W diode laser at 809 nm.

• Korean Journal of Optics and Photonics
• /
• v.10 no.6
• /
• pp.524-526
• /
• 1999

It is observed that the mode spacing of an cxternal cavity semiconducror laser can be altered dramatically by the insertion of an intracavity etalon. 111e mode spacing is decreased as a function of etalon's reflectivity and this effect is quantitatively explained by an analysis of resonant modes. We abo show that this effect provides a precise and convenient alternative for determining the coating reflectivity of a high reflectivity etalon. talon.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.5
• /
• pp.1096-1103
• /
• 1990

A finite element method is used for analyzing the resonant characteristics of three- dimensional wind tunnel with circular cross section. The resonant frequencies of wind tunnel is nearly constant in Mach number range of 0.0-0.2. The resonant frequencies and modes of three-dimensional low speed wind tunnel have been calculated. The 20-node isoparametric element gives accurate results compared with the experimental results.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.84-85
• /
• 2017

본 논문은 LLC 공진형 컨버터의 고전력밀도를 위한 IM(Integrated Magnetics)을 제안한다. 일반적으로 컨버터의 전력밀도는 사용되는 변압기, 인덕터와 같은 자기소자에 의해 결정되므로, 평판형 자기소자(Planar Magnetics)는 고 전력밀도화에 매우 적합하다. 하지만 LLC 공진형 컨버터에 평판형 자기소자를 적용할 경우 높은 자기 결합도에 의해 공진을 위한 충분한 누설 인덕턴스를 얻을 수 없다. 따라서 공진동작을 위한 추가적인 인덕터의 사용이 필수적이며, 전력밀도는 감소하게 된다. 반면, 제안방식은 자기소자 내부에 형성되는 두 개의 자화 인덕터를 공진 인덕터로 사용하기 때문에 공진동작에 필요한 누설 인덕터가 필요하지 않다. 또한, 이러한 두 개의 자화 인덕터는 하나의 자기소자에 집적화 할 수 있으므로 고 전력밀도에 유리한 구조를 갖는다. 더불어, 공진동작에 필요한 모든 파마리터가 설계자의 의도대로 설계가능하기 때문에 컨버터 최적설계가 매우 유리하다. 제안방식의 타당성을 확인하기 위하여 자기소자 모델을 통한 효율분석 및 350W-800kHz 시작품에 대한 실험결과를 제시한다.

• 전기의세계
• /
• v.32 no.3
• /
• pp.142-149
• /
• 1983

지금까지 알려진 내부마찰측정방법으로는 자유감쇄법(free decay method), 강제진동법(forced vibration method), 비공진강제진동법(non-resonance forced vibration method) 및 초음파법(ultrasoni method) 등이 있다. 이상의 모든 내부마찰실험방법에 관한 실험장치는 그 기계의 동작특성에 따라 실험주파수가 극히 한정되어 있어 연속적인 변화를 시킬 수 없으므로 완화효과를 연속적으로 추적하기 위하여 온도를 변화시키는 방법이 널리 사용되고 있다. 이상에서 소개한 방법들중 본인들이 국산제작실험에 성공한 바 있는 장치는 자유감쇄법에 속하는 염회진자장치(torsion pendulum device) 이므로 이 장치를 중심으로 내부마찰측정원리와 그의 장치에 관하여 소개하고저 한다.