• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.6
• /
• pp.93-99
• /
• 2003

In this study, new shock absorbing system is proposed by using nano-technology based on the theoretical analysis. The new shock absorbing system is complementary to the hydraulic damper, having a cylinder-piston-orifice construction. Particularly for new shock absorbing system, the hydraulic oil is replaced by a colloidal suspension, which is composed of a porous matrix and a lyophobic fluid. The matrix of the suspension is consisted of porous micro-grains with a special architecture: they present nano-pores serially connected to micro-cavities. Until now, only experimentally qualitative studies of new shock absorbing system have been performed, but the mechanism of energy dissipation has not been clarified. This paper presents a modeling and theoretical analysis of the new shock absorbing system thermodynamics, nono-flows and energy dissipation. Compared with hydraulic system, the new shock absorbing system behaves more efficiently, which absorb a large amount of mechanical energy, without heating. The theoretical computations agree reasonably well with the experimental results. As a result. the proposed new shock absorbing system was proved to be an effective one, which can replace with the conventional one.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.04b
• /
• pp.131-136
• /
• 1993

일반적으로 공작기계 주축계에 대해서 요구되는 기본적인 항목들로는 고강성, 고감쇠, 고회전정밀도, 저발열, 장수명 등이 있다. 최근에는 이러한 기능들과 함께 가공능률과 가공정밀도의 향상을 도모하기 위해서 고속절삭을 실현햐ㄹ 수 있는 공작기계 주축계의 고속화, 즉 고속 주축계에 대한 연구가 활발히 진행되고 있다. 본 연구에서는 고속주축계의 동특성을 체계적으로해석하기 위해서 주축회전수의 영향을 고려한 유한요소모델(finite element model)을 도입하였다. 특히 주축은 세장비가 비교적 자기 때문에 Timoshenko보 이론으로, 베어링은 유한한 폭을 가지고 있기 때문에 반경방향 외에도 모멘트방향의 강성 및 감쇠특성을 가지고 있는 것으로 모델화 하였다. 그리고 고속주축계의 설계조건들을 도출하기 위해서 동특성 해석결과들로 부터 고속주축계의 모드매개변수들인 고유진동수와 감쇠비에 대한 주축 회전수, 베어링의 지지특성, 베어 링의 간격, 주축재료의 내부감쇠율 등의 영향을 고찰하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.5
• /
• pp.29-36
• /
• 2012

3-D linear acoustic analysis has been performed to elucidate damping characteristics of large Helmholtz acoustic cavities in FASTRAC thrust chamber. Acoustic impedance concept has been introduced to quantify combustion stabilization capacity. For a given acoustic cavity, sonic velocity in the cavity to achieve an optimal tuning has been determined and satisfactory agreement with the previous results has been obtained. Feasible estimation of sonic velocity in the acoustic cavity has been devised. Results show similar trends without significant deviations, which can be used in the procedure of design and verification of acoustic cavity. From the satisfactory results, investigation of other thrust chambers with acoustic cavities which have shown combustion instabilities will be done as future works.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.16-23
• /
• 2012

3-D linear acoustic analysis has been performed to elucidate damping characteristics of large Helmholtz acoustic cavities in FASTRAC combustor. Acoustic impedance concept has been introduced to quantify combustion stabilization capacity. For a given acoustic cavity, sonic velocity in cavity to achieve an optimal tuning has been determined and satisfactory agreement with the previous results has been obtained. Feasible estimation of sonic velocity in acoustic cavity has been devised. Results show similar trends without significant deviations, which can be used in the procedure of design and verification of acoustic cavity. From the satisfactory results, investigation of other combustors with acoustic cavities which have shown combustion instabilities will be done as future works.

• 대한방사선방어학회:학술대회논문집
• /
• 2011.11a
• /
• pp.98-99
• /
• 2011

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1992.08a
• /
• pp.106-113
• /
• 1992

쇄파대에서 파고의 감쇠 및 내부유속장에 대한 이해는 표사문제 및 해안구조물의 설계 등에 있어서 중요하다(Nadaoka and Kondoh, 1982). 특히 해빈변형의 예측문제에 있어서 가장 중요한 문제의 하나는 쇄파대 내ㆍ외에서 저면마찰력과 표사량을 정도 높게 계산하는 것이다.(중략)

• Explosives and Blasting
• /
• v.19 no.1
• /
• pp.41-52
• /
• 2001

본 연구에서는 터널발파 진동의 전달 특성을 규명하기 위하여 네 곳의 도로터널의 '터널내부','터널외부','터널직상부 진행방향', '터널직상부' 진행직각방향'의 네 방향으로 발파진동을 계측하였다. 지발당장약량을 해당 지발당장약량과 최대 지발당장약량으로 구분하였으며, 지반의 진동 전달 특성을 확인하기 위하여 자승근 환산거리와 입방근 환산거리로 회귀분석 하였다. 또한 PPV, 거리별 우세진동수를 구하였다. 터널상부 진행방향의 진동 수준이 가장 크게 나타났으며, 진동의 감쇠도 크게 이루어졌다. 터널내부는 비교적 고주파성분이 우세하였으나 나머지는 일반적인 경향을 보였다 최대 지발당장약량을 적용한 입방근 환산거리의 경우가 거리별 감쇠특성 및 상관성이 다른 비교대상에 비하여 가장 우세하게 나타났다. 따라서 최대 지발당장약량을 적용한 입방근 환산거리 방식으로 설계하는 것이 바람직하다고 판단된다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.5
• /
• pp.458-465
• /
• 2009

In general, ultrasonic guided wave techniques that used for an evaluation of the internal defect have been applied without considering energy loss. It can be found out that the significant attenuation is observed in the signal of structure with defect by the scattering and absorption. Even in the signal acquired from defect-free structure, this attenuation can be also significant. Therefore, it is very essential to determine the Lamb wave propagation characteristics depending on modes because the dispersibility of Lamb wave can be easily influenced by the attenuation effect with frequency and thickness. For this reason, changing the propagation distance, attenuation coefficient of each Lamb wave mode needs to be investigated by the contact pitch-catch method with PZT(piezoelectric) sensors. In this paper, the experimental attenuation coefficient is measured by choosing the following three different variables; mode, thickness and plate materials. As a result, experimental attenuation coefficient is obtained as the function of variables.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2008.11a
• /
• pp.25-26
• /
• 2008

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.2
• /
• pp.31-38
• /
• 2008

A column test was performed far a new-type column with a quasi static test. An internally confined hollow reinforced concrete column with a corrugated steel tube (ICH RC-CT column) was tested to evaluate its seismic performance. And also, a general solid RC column was tested fur the comparison. The test was performed as planned drift levels. The lateral displacements and the lateral loads of column specimens were measured during tests. From the test results, the ICH RC-CT column showed smaller energy absorbing capacity than a solid RC column but showed the almost equal energy ductility and equivalent viscous damping ratio to those of the solid RC column.