• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.119-119
• /
• 2013

5년 동안 진행된 고진공 펌프 개발 사업의 일환으로 맥동관형 냉동기에 활성탄 어레이를 장착한 흡기구 직경 14인치 국산 크라이오펌프 완제품이 만들어졌다. 이미 지난해에 완성한 시제품을 가지고 모든 배기성능시험을 완료하고 목표를 뛰어 넘는 성능을 가지고 있음을 입증하였지만 완제품의 경우는 현장에서 스퍼터링 공정에 대한 신뢰성과 열적 내구성 시험이 중요한 항목으로 대두되었다. 개발된 펌프를 생산 공정에 직접 투입하는 모험을 하지 않으면서도 신뢰성을 확보하는 방편으로 카이스트 나노종합팹 센터에서 가동중인 스퍼터링 장비에 완제품을 달고 기존 공정과 같은 방식으로 장치를 운영하면서 외제 상용품을 사용했을 때와 진공성능 및 공정수율을 비교하는 시험을 수행하였다. 또 내구성 시험 항목으로 열부하 시험과 열 사이클 시험을 수행하였다. 열부하 시험은 300도까지 온도를 올릴 수 있는 열판을 펌프 흡기구 배플 앞에 설치하여, 냉동기 2차 냉각단 온도가 20 K 이하로 유지될 수 있는 최대 허용 복사열을 측정하는 방식으로 진행되었으며 열 사이클 시험은 크라이오 펌프의 활성화 기능을 활용하여 완전 활성화(full regen., 10K-300K-10K) 과정을 10회 연속 시행하여 펌프의 배기성능과 기계적 이상 유무를 관찰하였다.

• Journal of the Korea Convergence Society
• /
• v.11 no.5
• /
• pp.139-144
• /
• 2020

In this study, a simulation analysis on the drum itself and the brake was examined. And the analysis results were obtained by investigating the thermal analysis results and the durability through structural analysis. Through the thermal stress and structural analyses on the lining under the force due to the brake cylinder, the drum inside under the force due to the expansion of the lining and the drum under the force due to the rotation of the axis, it was confirmed at which part the amounts of equivalent stress and deformation became large. If applied to the brake disc design by combining the results of this study, it is considered to be large utilization at increasing the prevention against the thermal deformation and its durability. The results of this study can be usefully applied to the durability design that can withstand the thermal stress in the drum brake. By applying the durability analysis at the seam of railroad track by season, this investigation result is seen to be favorable as the convergent research applied to the aesthetic design.

• The tire
• /
• s.5
• /
• pp.51-54
• /
• 1967

• Journal of the Korean Society of Propulsion Engineers
• /
• v.17 no.1
• /
• pp.103-115
• /
• 2013

Durability testing method trends of the thermal barrier coating(TBC) for the combustion chamber of the liquid-propellant rocket engine have been investigated. Many types of the durability testing method such as the mechanical tests to measure surface cohesion force, the thermal fatigue tests with laser, furnace, burner or plasma, the small scale combustion tests using injectors, and the thermo-mechanical fatigue tests were observed. The TBC with sufficient durability can be selected for the use of combustion chamber through such specimen-level tests and the durability can be verified by the tests using the real scale combustion chambers.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.603-615
• /
• 2012

Durability testing method trends of the thermal barrier coating(TBC) for the combustion chamber of the liquid-propellant rocket engine has been investigated. Many types of the durability testing method such as the mechanical tests to measure surface cohesion force, the thermal fatigue tests with laser, furnace, burner or plasma, the small scale combustion tests using injectors, and the thermo-mechanical fatigue tests were observed. The TBC with sufficient durability can be selected for the use of combustion chamber through such specimen-level tests and the durability can be verified by the tests using the real scale combustion chambers.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.12
• /
• pp.1431-1434
• /
• 2014

The thermal barrier coating (TBC) applied to a gas turbine can be damaged by repeated thermal fatigue during operation, so an evaluation of its durability is needed. Thermally grown oxide (TGO) is generated inside the TBC in a high-temperature environment. The growth of TGO is known to be the main cause of damage to the TBC. Therefore, the durability of TBC should be evaluated according to the growth of TGO. In this research, Kim et al.'s work on the growth of TGO with aging was used as a basis for finite element analysis. The relationship between stress and aging was derived from the finite element analysis results. The durability of the TBC with aging was evaluated through a comparison between the results of the finite element analysis and a bond strength test.

• Journal of the Korea Convergence Society
• /
• v.11 no.11
• /
• pp.189-194
• /
• 2020

In this study, the durability on heat was considered through the thermal stress analyses on models A, B, and C of laptops. Model A is an integral part, indicating that the heated keyboard showed the highest temperature and the monitor part far from the heated one showed the coldest. In models B and C, only the heated keyboard parts are modeled, so it can be seen that they get hot overall. In the case of model A, the thickness of the laptop keyboard was thicker, but there were the most deformations, while model C had the thinnest thickness with the smallest stress and deformation. Model B had the highest stress but relatively little deformation. It is considered that the result of thermal analysis in this study can be used to make the latest efficient design of durable laptop. The durability of laptop against the heat can be evaluated by applying this study result to the laptop. And it is seen that the result can be the design of laptop with strength and the aesthetic convergence.

• Resources Recycling
• /
• v.23 no.3
• /
• pp.13-20
• /
• 2014

Nowadays, due to the development of industrial and civil engineering technology, enlargement and diversification of concrete structures are being tried. At the same time, the hydration heat generated during the construction of large structures lead to thermal crack, which is occurs causing a problem that durability degradation. In this paper, in order to study the durability and reducing hydration heat of concrete according to the types of cement, that is ordinary portland cement, fly ash cement mixed with a two-component, ternary blend cement mixed with fly ash and blast furnace slag and low heat cement concrete are produced, and compare and analyze the results using property, durability and hydration characteristics, ternary blend cement is appeared to be the most excellent in durability and reduction of hydration heat, and it was determined suitable for construction of mass concrete and requiring durability.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.4
• /
• pp.521-528
• /
• 2021

In this study, to repair damaged economizer fin tubes on ships, sealing treatment was performed after applying arc thermal spray coating technology using Inconel 625. A solid particle erosion (SPE) experiment was conducted according to ASTM G76-05 to evaluate the durability of the substrate, thermal spray coating (TSC), and thermal spray coating+sealing treatment (TSC+Sealing) specimens. The surface damage shape was observed using a scanning electron microscope and 3D laser microscope, and the durability was evaluated through the weight loss and surface roughness analysis. Consequently, the durability of the substrate was superior to that of TSC and TSC+Sealing, which was believed to be owing to numerous pore defects in the TSC layer. In addition, the mechanism of solid particle erosion damage was accompanied by plastic deformation and fatigue, which were the characteristics of ductile materials in the case of the substrate, and the tendency of brittle fracture in the case of TSC and TSC+Sealing was confirmed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.9
• /
• pp.3125-3134
• /
• 2010

Three-way catalyst durability in the Korea requires 5 years/80,000km in 1988 but require 10 years/120,000km after 2002. Domestic three-way catalyst satisfies exhaust gas conversion efficiency or pressure drop etc. but don't satisfy thermal durability. Three-way catalyst maintains high temperature in interior domain but maintain low temperature on outside surface. This study evaluated thermal durability of three-way catalyst by thermal flow and structure analysis and the procedure is as followings. Thermal flow parameters ranges were determined by vehicle test and basic thermal flow analysis. Response surface for rear catalyst temperature was constructed using the design of experiment (DOE) for thermal flow parameters. Thermal flow parameters for rear catalyst temperature in vehicles examination were predicted by desirability function. Temperature distribution of three-way catalyst was estimated by thermal flow analysis for predicted thermal flow parameters.