• Journal of the Korea Institute of Building Construction
• /
• v.10 no.2
• /
• pp.89-96
• /
• 2010

This study was based on an experiment that examines the manufacture and performance of fiber-reinforced cement composite panels. The conclusions were drawn after testing the mechanical properties and durability characteristics of fiber-reinforced mortar, and the mechanical properties and fire resistance of ECC fire resistant column panels. It was found that the fluidity of CEL fiber was lower than that of PVA and NY fiber. The amount of air increased slightly as the combination of fibers caused the number of fine pores to increase. It was found that the mechanical performance and deformability of high strength concrete could be improved through the confinement effect of ECC fire resistant column panels. Through continuous studies on the manufacturing and field construction methods of fire resistant column panels, a new PC method that eliminates weakness in the existing processes may be developed for skyscrapers.

• Journal of dental hygiene science
• /
• v.17 no.4
• /
• pp.358-367
• /
• 2017

The purpose of this study was to evaluate the influence of water infiltration and flexural strength changes in dental porcelain with glazing treatment. The block specimens were prepared as experimental materials, using feldspar type commercial dental porcelain; then, these were fired at $940^{\circ}C$ for 1 minute. The fired specimens were polished with a dimension of $40{\times}5.5{\times}5mm$. The specimens were distributed to two experimental groups: with and without glazing treatment specimens (n=5), and they were immersed in a solution of pH 7 for 3, 7, and 20 days at $40^{\circ}C$ after fabrication. To evaluate the flexural strength changes with water infiltration treatment in specimens with and without glazing, the 3-point flexural test was performed, using a universal testing machine until failure occurred. Starting powder and fired specimens consisted of amorphous and leucite crystalline phase. The Vickers hardness of fired specimens was more than 1.6 times higher than that of the enamel of natural teeth. According to porosimeter results, the specimens without glazing treatment exhibited a porosity of about 14.7%, whereas the glazed specimens exhibited the lowest porosity at about 1.1%. The average flexural strength of glazed specimens was higher than the flexural strength of specimens without glazing treatment (p<0.05). The flexural strength of all specimens with and without glazing treatment deteriorated with accelerated aging in the solution. In addition, significant differences between these two treatment groups were observed in all of the specimens treated at various water infiltration periods (p<0.05). The exposure of internal pores and micro-cracks in the surface due to polishing of the fired specimens influenced mechanical behaviors. Especially, the flexural strength in specimens without glazing treatment has shown significant degradation with the infiltration of water. Therefore, this study suggests that glazing processes can improve mechanical properties of dental porcelain.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.272-277
• /
• 2019

In this paper, a manufacturing method of an anti-glare cover glass on LCD for outdoor use is proposed. The main specification of cover glass is hardness and anti-glare. Hardness is achieved by using the tempered glass, and anti-glare(AG) film is laminated to meet anti-glare specification no the tempered glass. However, the AG film is difficult to maintain the AG performance continuously because the abrasion resistance of the PET film itself is as weak as about 3H. Therefore, a novel production procedure using screen printing method is proposed. The proposed coating is implemented by applying $ZnO-B_2O_3-SiO_2$ powder on glass surface and the glass is made with enhanced hardness through tempering process. In order to apply the ZBS powder uniformly on the glass surface, a screen printing process is used. The main parameters to be considered in screen printing are the oil concentration and mesh opening size. Because the amount of ZBS powder applied to the printing process is controlled by these two parameters, the correlativity is confirmed through the experiments. In order to evaluate the performance of the proposed method, the haze, surface roughness and transmittance are selected as the performance index and are compared with the AG film. As a result of comparison, it is verified that the transmittance of the proposed tempered glass is 83.1%, which is slightly lower than 89.5% of AG film, but the hardness is more than double to 7H.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.5
• /
• pp.71-77
• /
• 2009

In a range of forms, such as latex, water-soluble polymer, liquid resin, and monomer, polymer dispersions have been widely used in the construction industry as cement modifiers because of their excellent properties, such as acid-resistance, water-proofness, and good ductility in mortar and concrete. Polymer cement slurry (polymer-modified slurry) is made of cement and polymer dispersions, with a high polymer-cement ratio of 50% or more. The purpose of this study is to evaluate the water permeability and drying shrinkage of polymer cement mortar (polymer-modified mortar) and cement concrete coated by polymer cement slurry. The polymer cement mortar and cement concrete are prepared with various polymer types, polymer-cement ratios and curing methods, and are tested for water permeability, drying shrinkage and strength. The test results showed thatthe weight of permeable water of polymer cement mortar decreases with an increase in the polymer-cement ratio, reaching a minimum at the polymer-cement ratio of 20%. In particular, the weight of permeable water of St/BA-modified mortar with a polymer-cement ratio of 20% coated with St/BA-modified slurry is about 1/55 that of unmodified mortar. The EVA- and St/BA-modified slurries coated on cement concrete have about 4 or 5 times higher drying shrinkage compared to cement concrete. The strength of polymer cement mortars tends to increase with a higher polymer-cement ratio, and is considerably higher than that of unmodified mortar. It is thus concluded that polymer cement mortars coated by polymer cement slurry are effective for industrial application, and have superior properties such as waterproofness and strengths, compared with conventional cement mortar.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.178-178
• /
• 2011

도로소음은 다양한 소음원에 의해 발생하며, 도로를 이용하는 사람과 도로 주변사람에게 큰 불편을 초래한다. 보다 쾌적한 환경을 원하는 현대인에게 있어 도로 소음의 경감은 중요한 환경 공해로 작용한다. 도로 소음을 줄이기 위해서는 여러 가지 방법이 있을 수 있으며, 이 중 도로 포장의 개선을 통해 도로 소음을 경감할 수 있으며, 이와 같은 포장을 저소음 포장이라고 한다. 저소음 포장은 주행하는 차량의 타이어와 노면이 마찰하면서 발생하는 소음을 최소화하기 위한 것으로 소음 발생의 메커니즘을 바탕으로 하고 있다. 저소음 포장중 가장 널리 사용되고 있는 방법은 공극을 늘리는 것이다. 약 20%의 공극은 타이어와 노면 사이의 에어펌핑음을 최소화 하며, 소리를 흡수하는 역할로 약 3dB의 소음 가소 효과가 있는 것으로 알려져 있다. 소음을 감소시키는 또 하나의 방법은 노면의 표면 조직을 매끈하게 하여 타이어와 노면의 충격음을 줄이는 방법이다. 노면의 평탄성을 개선하기 위해 포장에 사용되는 골재의 최대크기를 줄이는 소입경 포장을 소음 가소의 목적으로 유럽 등지에서 많이 사용되고 있다. 본 연구에서는 이와 같은 저소음 기능을 위해 공극률을 크게 하고 소입경 골재를 사용하는 소입경 저소음 포장의 현장 적용을 위한 배합 설계를 수행하였다. 소입경 저소음 포장의 최대 골재 크기는 현장 적용성과 경제성을 고려하여 10mm 골재를 사용하였으며, 수도권에서 입수한 4곳의 산지 골재를 분석하여 골재 합성 입도를 산정하였다. 10mm 저소음 포장의 골재 입도 범위는 공극률 15~18%를 목표로 하며, 이를 만족하기 위하여 배합 설계를 수행한 결과 5mm 통과 중량 백분율이 약 30%로 하는 개립도가 적당한 것으로 나타났다. 공극이 증가함에 따라 포장의 내구성 향상을 위해 사용된 고점도 바인더는 아스팔트 혼합물의 생산 및 시공온도를 증가시키게 된다. 또한 굵은골재의 비율이 높은 개립도 아스팔트 혼합물의 경우 운반과정과 포설 과정에서 온도가 빨리 떨어지는 단점이 있다. 이를 극복하기 위하여 중온 첨가제의 사용을 통해 생산 및 다짐온도를 낮추고자 하였다. 소입경 저소음 포장의 배합설계 과정은 배수성 포장의 배합설계 과정과 유사하나, 칸타브로 손실률과 흐름실험의 변곡점을 기준으로 할 경우, 칸타브로 손실률과 흐름 손실률이 매우 작아 변곡점을 판단하기 어렵기 때문에 칸타브로 손실률과 흐름 손실률의 기준 만족 여부로 판별하고, 최적 아스팔트 함량은 공극률을 기준으로 산정하는 것이 바람직할 것으로 판단된다. 중온 첨가제를 사용할 경우는 중온 첨가제로 인한 점도의 변화를 감안하여 혼합 및 다짐 온도를 결정하고 배합 설계를 수행하며, 중온 첨가제의 특성과 양에 따라 최적 아스팔트 함량이 변화하게 된다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.133-133
• /
• 2012

일반적으로 TiO2는 광촉매 작용으로 표면 살균성을 가지며, 친수특성으로 인한 자가세정 능력도 가지고 있다. 또한 지구상에 많이 존재하는 광물로 원료의 가격이 저렴하다는 장점이 있어 산업 전반에 사용되고 있다. 하지만 외부의 환경적 오염으로 인한 광촉매 반응 면적의 감소에 따라 반응효율이 저하되는 단점이 있으며, SiO2는 투명한 유리와 같이 비정질상태가 안정하고 높은 굴절률을 가지며 내구성이 외부환경에 강해 무반사 코팅이나 금속박막의 보호층으로 주로 사용된다. WO3는 높은 굴절률과 가시광선 영역에서의 우수한 투과율을 가지고 있으나 conduction band에서 생성된 광캐리어들이 빠르게 재결합 하여 광분해 효율이 좋지 않기 때문에 흔히 쓰이지 않고 있다. 이러한 박막들의 단점을 보완하기 위해 물리적 구조를 변화시켜 반응 면적을 극대화하기 위해 버퍼층이나 다층박막을 사용하는 등 다양한 연구가 진행되고 있다. 본 실험에서는 Slide glass에 Plasma etching 하였을때 친수성이 나타나는 특성을 이용하여 대면적 코팅과 표면 경도를 우수하게 만들 수 있는 RF Magnetron sputtering법으로 Slide glass에 Ar Gas 분위기에서 각 파워별 Plasma etching한 후 TiO2, SiO2, WO3 박막을 증착하여 광학적, 구조적 특성을 분석하였다. 광투과율 측정장치(UV-VIS Spectrophotometer)를 사용하여 투과율을 측정한 결과 모든 박막이 가시광 영역에서 80% 이상의 높은 투과율을 나타내었으며, 접촉각 측정결과 100w로 etching한 glass에 TiO2를 증착한 박막에서 가장 낮은 $3^{\circ}$ 이하의 접촉각을 나타내었다. SEM (Scanning Electron Microscope) 분석을 통해 표면구조를 관찰한 결과 100w로 etching한 후 TiO2를 증착한 박막이 가장 조밀한 구조를 보였으며, AFM (Atomic Force MicroScope) 분석 결과 100w로 etching한 후 TiO2를 증착한 박막의 표면이 가장 거칠어지는 것을 볼 수 있었는데, 이는 물과 닿는 박막의 유효 표면적의 증가로 인하여 광촉매 효과가 증가하였기 때문에 친수성이 향상된 것으로 사료된다. 이러한 박막은 건물 유리벽과 자동차의 내 외장재 전자기기용 광학 필름에 자가세정, 내반사 코팅소재, 디스플레이 표시장치로 활용할 수 있을 것으로 예상된다. 본 연구는 중소기업청에서 지원하는 2011년도 산학연 공동기술개발 지원사업의 연구수행으로 인한 결과물임을 밝힙니다.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.4
• /
• pp.345-352
• /
• 2011

The purpose of this study was to investigate the expansion of alkali-activated mortar based on ground granulated blast furnace slag containing reactive aggregate due to alkali-silica reaction. In addition, this study was particularly concerned with the behavior of these alkaline materials in the presence of reactive aggregates. The experimental program included expansion measurement of the mortar bar specimens, as well as the determination of the morphology and composition of the alkali-silica reaction products by using scanning electron microscopy(SEM), and energy dispersive x-ray(EDX). The experiment showed that while alkali-activated ground granulated blast furnace slag mortars showed expansion due to the alkali-silica reaction, the expansion was 0.1% at Curing Day 14, showing that it is safe. After the accelerated test, SEM and BEM analysis showed the presence of alkali-silica gel and rim around the aggregate and cement paste. According to the EDX, the reaction products decreased markedly as alkali-activated ground granulated blast furnace slag was used. In addition, for the substitutive materials of mineral admixture, a further study on improving the quality of alkali-activated ground granulated blast furnace slag is needed to assure of the durability properties of concrete.

• Journal of the Korean Ceramic Society
• /
• v.41 no.7
• /
• pp.518-527
• /
• 2004

In this study, SiC whiskers were grown in porous alumina substrate in order to enhance the filtering efficiency, performance, and durability by controlling pore morphology. This experiment was performed by Chemical Vapor Infiltration (CVI) in order to obtain the whiskers on the inside of pores as well as on the surface of porous the A1$_2$O$_3$ substrate. The deposition behavior was changed remarkably with the deposition position, temperature, and input gas ratio. First, the mean diameter of whisker was decreased as the position of observation moved into the inside of substrate due to the reactant gas depletion effect'. Second, the deposition temperature caused the changes of the deposition type such as debris, whiskers and films and the change in morphology affect the various properties. When SiC films were deposited. the gas permeability and the specific surface area decreased. However, the whisker showed the opposite result. The whiskers increase not only the specific surface area and minimizing pressure drop but also mechanical strength. Therefore it is expected that the porous alumina body which deposited the SiC whisker is the promising material for the filter trapping the particles.

• Journal of the Korean Society for Railway
• /
• v.16 no.3
• /
• pp.189-195
• /
• 2013

Recent trains have broadband train communication networks to improve train operation safety and to provide passengers with multimedia services. Compared to glass optical fiber, plastic optical fiber (POF) has a large diameter; it also provides the good durability and maintainability necessary to railway applications. This paper suggests an All-IP broadband train communication network that connects all devices in the train through a POF interface. Performance tests according to Korean railroad standards shows that this POF interface is usable in the range of vibration and temperature conditions encountered in trains. A dedicated Layer-2 switch with the POF interface is developed for the construction of the All-IP train communication network. A prototype 1Gbps train communication network was set up in a trial-run of train on a metro line using the developed Layer-2 switch and POF. On-track tests indicated the feasibility of the POF train communication network. POF has an additional advantage of economic feasibility, and it is expected to start a trend toward broadband train communication networks using POF.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.6
• /
• pp.231-238
• /
• 2022

To secure the mechanical strength of porous Al₂O₃ ceramics, which can be utilized for filters and catalyst supports is essential for their functionality and durability. Superior mechanical strength would be obtained by tailoring the densification and grain growth during sintering. This study deals with grain growth behavior of a freeze-casted Al₂O₃ with addition of La₂O₃. In a temperature range between 1400 and 1600℃, variations of average grain size with sintering time and temperature were observed and analyzed with G_tⁿ-G₀ⁿ = kt and with k = k₀exp(-E_a/RT). As a result, n value and activation energy (E_a) for grain growth were calculated as 3 and 489.09 kJ/mol, respectively. These commonly confirms retardation effect of the La addition during sintering of Al₂O₃ porous structure. More accurate analysis on the La effect can be followed to provide useful guidance for the selection of additives for better mechanical strength in Al₂O₃ porous structures.