• Journal of the Korea Concrete Institute
• /
• v.26 no.5
• /
• pp.607-614
• /
• 2014

The purpose of this dissertation was to investigate the effect of mineral admixtures, such as fly ash, blast furnace slag powder, meta kaolin and silica fume, on the basic properties and durability of crushed sand shotcrete, selecting a series of shotcrete mixtures with a variable admixture. Compressive strength increased as the content of mineral admixtures increased, specially it was the most effective when using meta kaolin both at sample specimen and core after shotcreting. Rapid chloride ion permeability test and sulfuric acid resistance test showed that both durability increased as the substitute rate of mineral admixture increased. In air void analysis with image analysis, the targeted the spacing factor and specific surface were not satisfied because air-entrained agent was not used.

• International Journal of Highway Engineering
• /
• v.7 no.3 s.25
• /
• pp.53-62
• /
• 2005

Efficient snow-removing work is one of important processes of winter road management. Calcium chloride has been used as a typical deicing agent in Korea. It presents superial performance as snow deicing agents, however it has been known to give serious environmental problem and to deteriorate durability of concrete structure in road by corrosion. The environment-friendly road deicing agents made from the waste material which is liquid phase organic matter that is Ca Mg and reactant of organic acid (nitric acid and propionic acid) have been introduced by number of researchers. They indicated the calcium magnesium salt of organic acids have advantage over the calcium choride in terms of lower production unit cost by resources recycling and can solve environmental problem and durability deterioration of structures. In this study, the deicing performance of calcium magnesium salt of organic acids(CMO) is investigated based on the series of experiments including the test for heat of dissolution, freezing point, ice melting test and ice penetration test.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.6
• /
• pp.197-205
• /
• 2020

In 2014, The Housing Act amended to allows vertical extension and increases the units of housing (or total floor area) to site. Currently, the feasibility of performing vertical extension is evaluated based on safety diagnosis provisions and manuals with 1st investigation stage on slope, uneven settlement, load-bearing capacity, and durability. However, a need for more reasonable evaluation criteria for the investigation is still required because there had not been any other case study on the diagnosis for the vertical extension, and the engineering basis on evaluation criteria were not suggested. Accordingly, this study is intended to suggest feasible evaluation criteria on the carbonation, chloride ion contents, corrosion of reinforcements, crack and surface deterioration of concrete for durability assessment by codes and standards of domestic and foreign countries. The results of this study are expected to be beneficial for establishing more reasonable durability evaluation criteria, and in turn, more reliable assessment protocol for vertical extension.

• Journal of Korean Society of Transportation
• /
• v.8 no.1
• /
• pp.119-128
• /
• 1990

교통자산과 같은 내구재는 일정 기간 동안의 수명을 가지게 된다. 이 기간 동안에 내구재는 어떠한 형태로 소비되어 지고 이에 따라 내구재는 효율성을 잃어 간다. 내구재를 효율적으로 사용하기 위해서는 적절한 관리를 필요로 한다. 본 연구는 내구재를 효율적으로 사용하기 위해 필요한 관리비용의 동적형태를 이론적으로 고찰한 다음, 미국에서의 업무용 비행기의 관리비용자료를 사용하여 경험적인 결과를 제시한다. 본 연구의 결과는 다음과 같다. (1) 관리비용은 시간이 감에 따라 줄어든다. 그러나 관리비용의 잠재가격(Shadow Price)에 대한 비율은 여러 가지 외적변수들에 결정된다. (2) 미국에서의 업무용 비행기의 시장가격에 대한 관리비용의 비율은 시간이 감에 따라 늘어난다.

• Proceedings of the KIEE Conference
• /
• 2004.07c
• /
• pp.1903-1905
• /
• 2004

고압전동기나 발전기의 사용수명은 절연시스템의 열화에 의해 좌우된다. 일반적으로 기기의 내구성을 확인하기 위해 국제규격이나 국내규격에서 적용하고 있는 방법으로는 온도에 의한 열화시험을 실시하여 절연계급에 대한 내구성을 평가한다. 본 논문에서는 현재 국내에서 제정된 신뢰성평가기준에 따른 국내 2개 회사의 일반유도전동기에 대해 실시한 온도 가속수명시험을 통해서 얻어진 자료를 이용한 시험방법의 개선 및 고장분석 등 신뢰성분석에 대해서 서술한다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.2A
• /
• pp.171-179
• /
• 2009

The porosity in porous media like concrete can be considered as a durability index since it may be a routine for the intrusion of harmful ions and room for the keeping moisture. Recently, modeling and analysis techniques for deterioration are provided based on the pore structure with the significance of durability and the relationship between porosity and durability characteristics is an important issue. In this paper, a series of mortar samples with five water to cement ratios are prepared and tests for durability performance are carried out including porosity measurement. The durability test covers those for compressive strength, air permeability, chloride diffusion coefficient, absorption, and moisture diffusion coefficient. They are compared with water to cement ratios and porosity. From the normalized data, when porosity increases to 1.45 times, air permeability, chloride diffusion coefficient, absorption, and moisture diffusion coefficient decrease to 2.3 times, 2.1 times, 5.5 times and 3.7 times, respectively, while compressive strength decreases to 0.6 times. It was evaluated that these are linearly changed with porosity showing high corelation factors. Additionally, intended durability performances are established from the test results and literature studies and a porosity for durable concrete is proposed based on them.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.523-524
• /
• 2009

This study focused on possibility of new optimized durability design for deteriorated RC structure's repairing. New optimized durability design adopted Life Cycle Assessment as sustainability index.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.183.2-183.2
• /
• 2013

저항이 낮고 투과도가 일정한 투명전도막(TCF)의 내구성을 향상 및 유지 시키는 연구는 상업화에 가장 필요한 연구 분야이다. 그 중 탄소나노튜브(CNT)와 실버나노와이어(AgNW)를 섞어 만든 CNT-AgNW는 우수한 광투과성과 내화학성 및 균일한 전기 전도성을 갖고 있고 그 기반의 투명전도막은 기존의 ITO 및 CNT 박막보다 우수한 유연성을 갖기 때문에 차세대 플렉시블 디스플레이 소재로서 많은 관심을 모으고 있다. 본 연구는 PET를 이용한 CNT-AgNW로 제작된 투명전도막 위에 물성 및 두께 따른 하드오버 코팅을 통한 내구성 개선 및 유지를 연구하였다. 하드오버 코팅 물질로는 실로콘계 하이브리드 투명 하드코팅 소재를 기본으로 하고 용매 및 용질의 합성 온도를 제어하고 코팅막의 두께(Thin, Thick)를 조절을 통해 내구성 개선을 증진시키려 하였다. 연구결과 물성 향상에 가장 많은 영향을 끼치는 것은 CNT-AgNW 코팅층과 하드오버 코팅층과의 젖음성으로, 그 젖음성이 증가할수록 투과도 및 전기전도도가 향상되는 것을 관찰하였다. 분석 결과, 용매의 비점 및 비중, 용질의 합성 온도가 하드오버코팅 젖음성에 가장 많은 영향을 주는 것을 확인하였다. 또한 항온 항습($85^{\circ}C/85%$) 환경에서 240시간 이상 내구성 테스트 결과 하드오버코팅 물질 중 고온합성 및 고비점 용매를 이용하고 thick 조건이 Thin조건보다 투명전도성 평가 지수(${\sigma}DC/{\sigma}OP$)가 향상 되었다. 또한 Thin에서 면저항(${\Omega}/{\square}$) 변화율이 10% 이상을 보인 반면, Thick에서는 10% 이내의 변화율 유지를 확인하였다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.545-548
• /
• 2008

As the corrosion of reinforcing bar in concrete structures exposed to chloride attack is one of main factors to determine the remaining service life, marine concrete structures have to be designed to protect the chloride penetration. Among the durability design methods such as deterministic method and probabilistic method, design method based on the probabilistic theory has been widely studied. However, the most essential material, data of the material properties related to chloride diffusion, are still insufficient. In this paper, the probabilistic distribution of chloride diffusion coefficients and aging coefficients are derived by the experiment and analysis for the chloride coefficients of concrete containing pozzolans, which are generally used in marine structures.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2001.07a
• /
• pp.85-90
• /
• 2001