• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.1
• /
• pp.11-17
• /
• 2014

In this study, a hydraulic model experiment under wave conditions was carried out to investigate the gap/distance between two near-unit farm lines that affects the rope kink and shape variation of a seaweed farm during mooring block movement. As a result, rope kink occurred during the low wave height condition as the gap/distance between the two near-unit farm lines decreased. The seaweed farm maintained a stable shape in the higher wave height conditions as the gap/distance between the two near-unit farm lines increased. This result indicates that rope kink is sensitively affected by the gap/distance between the two near-unit farm lines. A tendency to increase the critical wave height was observed when mooring block movement occurred, and as the mooring block weight and wave period increased. From the experimental results in which incident wave conditions and the mooring block weight changed, as the front side mooring block weight increased from 3.0 to 8.0 tons, the seaweed farm was stable, and rear side mooring block movement hardly occurred. The observed tension of the seaside mooring line was a maximum at about 3.0 ton/m.

• Science of Emotion and Sensibility
• /
• v.11 no.4
• /
• pp.449-460
• /
• 2008

PET fabric is used as a regular clothing in the middle-east region which is called Chador as a women's clothing and Thobe as a men's clothing. Then there is a big difference of export price according to the minute hand characteristics of the PET fabrics, of which characteristics are due to the fibre and manufacturing process characteristics. This research surveys the optimum manufacturing conditions related to the fibre and fabric for the Thobe clothing which were developed in this study through comparison with high price Teijin Thobe manufactured in Japan. In this research, four kinds of Teijin fabrics made in Japan were prepared as a target quality specimen, and five kinds of developed fabrics were produced as an experimental specimens. These specimens were made by changing yarn denier, twist, yarn setting conditions and fabric density, which are also changed by twist contraction, weaving and finishing shrinkages. As a result of this study, the sensitive characteristics of Teijin Thobe fabrics can be analysed from fibre and fabric, and then the manufacturing design technology was constructed under the base of low twist texturing and 3 dimensional fabric design simulation technologies.

• Science of Emotion and Sensibility
• /
• v.24 no.2
• /
• pp.49-56
• /
• 2021

In this study, we investigated the necessary mechanical properties of conductive multifilament yarns for fabricating the electrodes of biosignal measurement pressure and stretch textile sensors using embroidery. When electrodes and circuits for smart wearable products are produced through the embroidery process using conductive multifilament yarns, unnecessary material loss is minimized, and complex electrode shapes or circuit designs can be produced without additional processes using a computer embroidering machine. However, because ordinary missionary threads cannot overcome the stress in the embroidery process and yarn cutting occurs, herein, we analyzed the S-S curve, thickness, and twist structure, which are three types of silver-coated multifilament yarns, and measured the stress in the thread of the embroidery simultaneously. Thus, the required mechanical properties of the yarns in the embroidery process were analyzed. In the actual sample production, cutting occurred in silver-coated multifilament rather than silver-coated polyamide/polyester, which showed the lowest S-S curve. In the embroidery process, the twist was unwound through repetitive vertical movement. Further, we fabricated a piezoresistive pressure/tension sensor to measure gauge factor, which is an index for measuring biological signals. We confirmed that the sensor can be applied to the fabrication of embroidery electrodes, which is an important process in the mass production of smart wearable products.

• Korean Journal of Ecology and Environment
• /
• v.50 no.3
• /
• pp.355-361
• /
• 2017

In this study, we investigated the response of freshwater oligochaete, Tubifex tubifex, to the water temperature changes and the differences of substrate composition in a laboratory condition. The changes of body shape were observed in a test cage according to the water temperature change ranging from $10^{\circ}C$ to $30^{\circ}C$ with $2^{\circ}C$ interval every 10 minutes. The substrate preference was observed with four different substrate composition from silt-clay to coarse sand. Our results displayed that T. tubifex preferred substrates with the smallest particle size (<0.063 mm). The water temperature influenced on the activity and body shape of T. tubifex, showing low activity with the coiled and constricted body shapes at lower temperature and high activity with relaxed linear body shapes at higher temperature.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.535-539
• /
• 2022

This study analyzed the efficient hose loading method for indoor fire hydrants, and the experimental results are as follows. An effective fire hose loading method is to be derived through an experiment comparing the fire hose loading method of an indoor fire hydrant and the speed of fire suppression. When the fire hose was loaded by folding, it took an average of 33 seconds to load the fire hose, and for the hangyeopsal, it took an average of 69 seconds to load the fire hose, showing a significant difference. First, in the folding hose deployment experiment, subjects A, C, D, and E showed similar values from 34 seconds to 37 seconds, respectively. The reason seems to be the result of the fact that the fire hose was not twisted when unfolding, and that it was possible to deploy the hose smoothly. Subject B showed the lowest deployment time at 25 seconds, which seems to be the result of B's experience in deploying the fire hose. Second, in the hose unfolding experiment, subjects A, B, C, and E had a similar time period of 44 to 76 seconds, respectively. However, the test subject D was significantly higher at 110 seconds. The reason is that the attempt to prevent hose kinking when deploying the fire hose and the unstable psychological state through tension are judged to increase the fire hose deployment time.