• Korean Journal of Soil Science and Fertilizer
• /
• v.30 no.2
• /
• pp.161-167
• /
• 1997

The effect of Bituminous and Anthracite coal ash(fly ash) on the performance of Chinese cabbage on an acid soil was studied through a pot experiment. The levels of application of the materials tested were five, 10 and 15% of dry soil weight. Regardless of the kind of fly ash, the application of it, tended to increase the yield of Chinese cabbage by 13 to 24% in fresh weight. Difference in application levels did not result in the difference in increasing the yield of Chinese cabbage. The application of fly ash tended to lower the all of the mineral nutrient contents in the Chinese cabbage, excepting boron. Boron content tended to increase along with the application of fly ash. Bituminous ash raised the pH of soil and increased available P, exchangeable Ca and soluble boron in the soil remarkably. Anthracite ash, on the other hand, did not increase the contents of other components in the soil, than soluble born.

• Korean Journal of Heritage: History & Science
• /
• v.57 no.1
• /
• pp.146-159
• /
• 2024

In this study, a study on the production technology of the Buddha statue and the production of raw material origin was conducted through scientific analysis on the Bronze seated Bodhisattva Statue of Goseongsa Temple, a treasure. As a result of microstructure analysis through a metal microscope, it was confirmed that the microstructure of the Bronze seated Bodhisattva Statue of Goseongsa Temple was a process-type dendritic structure, and the casting structure of bronze was well represented, so it was manufactured through casting. Subsequently, as a result of analyzing the alloy composition ratio through SEM-EDS, it was identified as a ternary alloy with 81.26 wt% of copper (Cu) and 16.42 wt% of tin (Sn) and 1.72 wt% of lead (Pb). The results of the analysis of lead isotope ratios using a thermal ionization mass spectrometer (TIMS) were substituted into the distribution of lead isotope ratios on the Korean Peninsula, it was shown in corresponding to Jeolla-do and Chungcheong-do regions and North and South Gyeongsang Province. This suggests that the raw materials used in their production were likely sourced from the mines around Goseong Temple in Gangjin. Despite the fact that the statue is a medium and large Buddha with a total height of 51 centimeters, 1.72 wt% of lead (Pb) was found as a result of alloy composition ratio analysis, which showed a similar composition to the lead content ratio of small bronze and gilt-bronze Buddha statues. Therefore, we compared and analyzed the results of the analysis of the composition ratio of the alloys of bronze and gilt bronze statues, which has been scientifically analyzed with a compositional age similar to that of the Bronze seated Bodhisattva Statue of Goseongsa Temple. Comparison results, Various factors, such as the size of the Buddha statue as well as its stylistic characteristics and the age of composition, may exist in determining the alloy composition ratio of the bronze and gilt bronze Buddha statues, and it was confirmed that the alloy composition ratio or casting technology was properly adjusted when the Buddha statue was created. In other words, it is judged that a more comprehensive system of Buddha statue production technology should be investigated by conducting archaeological and art history studies on stylistic characteristics and age of composition, as well as scientific analysis results such as observation of internal structure, microstructure observation, and analysis of alloy composition ratio using radiation transmission irradiation.

• Korean Journal of Food Science and Technology
• /
• v.37 no.3
• /
• pp.329-333
• /
• 2005

Contents of heavy metals, mercury (Hg), lead (Pb), cadmium (Cd), arsenic (As), manganese (Mn), zinc (Zn), and copper (Cu), In ginsengs and ginsengs products their safety were evaluated using a mercury analyzer, atomic absorption spectrophotometer and Inductively coupled plasma spectrometer. Contents of heavy metals in ginsengs were [min-max(mean), mg/kg]; Hg 0.002-0.02(0.007), Pb 0.018-0.39(0.106), Cd 0.004-0.413(0.106), As ND-0.094(0.013), Cu 0.24-5.5(3.2), Mn 3.18-50.4(20.09), Zn 0.76-44.27(13.42). Ginseng products values were; Hg 0.0001-0.002(0.001), Pb 0.001-0.133(0.017), Cd ND-0.07(0.004) As ND-0.181(0.008), Cu ND-1.1(0.13), Mn 0.73-30.15(1.61). Zn 0.02-13.42(1.02), similar to those reported by other countries. Average weekly Intakes of Hg, Pb and Cd from ginseng and ginseng products were 0,003, 0.01 and 0,02% of provisional tolerable weekly intake established by FAO/WHO, respectively. Our result could be utilized as important references to establish the standard of lead in ginseng and ginseng products.

• Korean Journal of Soil Science and Fertilizer
• /
• v.29 no.4
• /
• pp.419-423
• /
• 1996

Municipal sewage sludge produced at the Daegu Dalseo River Municipal Sewage Treatment Station was applied to radish(cv. Altari) to develop as an organic fertilizer. The sludge contained 53.59% of organic matter, 2.89% of nitrogen, and 3.5% of phosphate, so it seems to be enough to use as an organic fertilizer. Although the Cd and Pb contents of the sludge were lower than the official standard levels for the by-product fertilizer, it seems to be needed more researches due to the accumulation of the heavy metals both in soil and plants. Application of the sludge increased soil pH, organic matter, total nitrogen, available phosphate, exchangeable Ca and Mg contents, and CEC. Also application of the sludge tended to increase Cd and Pb contents slightly in soil. Application of the sludge increased N, $P_2O_5$, Cd, and Pb contents in plant and among the heavy metals Cd accumulated more than Pb. Yield of radish increased up to 1.000kg/10a of sludge in addition to the standard chemical fertilization or 3,000kg/10a of the sludge only.

• Korean journal of applied entomology
• /
• v.18 no.1 s.38
• /
• pp.43-48
• /
• 1979

This study was conducted to detect lead which is exhausted with gas from running automobiles and is considered to accumulate in cropping lands. Soil samples were taken from uplands and paddy fields with different distance from highways. atonic absorption spectrophotometer was applied for analysis. Results obtained are summarized as follows: 1. In the areas of Seoul toll gate and Jookjeon, Gyeonggi province, soils of fields within $3\~5$ meters from highway appeared to contain $11\~110\;ppm$ of lead. On the other hand, soils outside of $3\~5$ meters showed only natural background level of lead. 2. The maximum concentration of lead in Hwoedeuk area (Choong-nam p개vince) was 16.3 ppm and those of Kimhae and Dongrae areas were about 12 ppm. Low concentration of $1\~4\;ppm$ was observed in the areas, south of Daejeon along the Honam and Namhae highways. 3. Lead seemed to accumulate in the soil surface within the range of 0 to 5 centimeters which anable to expect little translocation to deeper layer of the soil. 4. lost of arable lands locates at least 15 meters apart from highways so that lead concentrations were lower than expected. No damage could be speculated with the present concentration of lead analyzed. This does not deny the necessity to the long term dectect of the possible pollutant.

• Journal of Conservation Science
• /
• v.32 no.1
• /
• pp.11-19
• /
• 2016

Seungja Chongtong is a small korean tubular arm that made by particular arm-making way imitating a chinese arm. This study organizes scientific analysis results with results of inscriptions reading of Seungja Chongtong in the Central museum of Kyunghee University. Three of Seungja Chongtongs are made with Cu-Sn-Pb ternary alloy which is not much differ in contents and the results of microstructure analysis of Seungja Chongtong 1 which could investigate a microstructure among the Chongtongs were found out that Seungja Chongtong is made by general casting, with no evidences of an additional heat-treatment and tempering. Furthermore, in results of lead isotope ratio analysis to find out a source of lead using during the production of Seungja Chongtong, It seems that Seungja Chongtong is made with a lead ore from northern Gyeongsangbuk-do Province and southern Gangwon-do Province called Korea southern zone 2 area.

• Journal of Korea Soil Environment Society
• /
• v.2 no.3
• /
• pp.69-80
• /
• 1997

This investigation was conducted to provide information for characteristics of environmental pollution by the heavy metals from the abandoned gold mine in order to characterize the distribution patterns and environmental damages of the contaminants to the surrounding environment. Through analysis of CN, Cd, Cu, Pb, Zn, As, Cr, and Hg in a mine tailings, paddy soils, and stream sediments, the physico-chemical properties of the mine tailings and paddy soils were measured. The pH's were 5.4, 8.4 for the paddy soil and mine tailing, respectively. The maximum contents of CN, Pb, Cd, and As the in mine tailing were 99.98, 1,752.72, 31.88, and 298.50 mg/kg, respectively. The amounts of these ions were higher than the standard level of industrial area in Korea. The average content of CN and heavy metals in the paddy soils were higher than the background level of heavy metals in the unpolluted paddy soils around the mine. Especially, the contents of heavy metals in the paddy soils along the adjacent stream were higher compared to the paddy soil that was not influenced by the mine tailings. The contents of CN and heavy metals in the stream sediment close to the mine area were similar to those of the mine tailings, but decreased along the distance of the stream farther away from the tailings that was the source of these pollutants.

• Korean Journal of Soil Science and Fertilizer
• /
• v.28 no.4
• /
• pp.295-300
• /
• 1995

In order to find out the natural content of heavy metals(Cd, Cu, Pb, Zn, Cr, Ni)in paddy soil of Korea, a total of 1,196 soil samples of 15cm top layers all over the country 1995 were collected and analyzed. The average heavy metal contents in soils were 0.133mg/kg of Cd, 4.52mg/kg of Cu, 4.62mg/kg of Pb, 3.90mg/kg of Zn, 0.362mg/kg of Cr and 1.38mg/kg of Ni. These results are similar to the results of survey conducted in 1981.

• Analytical Science and Technology
• /
• v.14 no.3
• /
• pp.253-258
• /
• 2001

This is a research on hazardous characteristics and potentials of bottom ash from 9 municipal solid waste combustors(200 tons/day) of Korea by the test methods of leaching and content. The leaching method was performed by Waste Test Method of Korea. In case of the content method, mercury was determined by thermal decomposition amalgamation atomic absorption spectrometer, other 9 elemets including Pb, which were pretreated by U.S.EPA SW-846 3050B method, were determined by flame atomic absorption spectrometer(FAAS) or inductively coupled plasma atomic emission spectrometer(ICP-AES). Results of leaching test showed that Pb and Cu was main pollutants. It was interested that the distribution rate of metals' contents of each combustors was similar and the rank of concentration was Fe>Zn>Cu>Mn>Pb>Cr>As>Cd>Hg.

• Conservation Science in Museum
• /
• v.28
• /
• pp.89-108
• /
• 2022

Among about 500,000 characters in metal types in National Museum of Korea, this study conducts a statistical analysis of 62 metal types from the early Joseon Dynasty, including 33 gabinja (甲寅字) types and 29 eulhaeja (乙亥字) Hangeul types by examining the shape, measuring the specific gravity, and identifying the components based on previously-studied Joseon metal types. Among them, 33 gabinja types and 24 eulhaeja types were made of two-component bronze (copper and tin) (Group A), and four eulhaeja types were produced with three-component bronze (copper, tin and lead). (Group B), and one eulhaeja type was created with two-component bronze (copper and tin) with a high tin content (Group C). By comparing with imjinja (壬辰字) types of the late Joseon Dynasty based on multiple statistical analyses of type components, this study confirms that late-Joseon types have low copper content and high zinc and lead content, and therefore it may be possible to distinguish between the types of early and late Joseon Dynasty.