• Land and Housing Review
• /
• v.4 no.1
• /
• pp.119-124
• /
• 2013

Generally, the characteristic of nanofiltration membranes were catagorized into charged membrane, sieve effect, interaction between membarnes and target solutes. This study aims to investigate the effect item of heavy metal separation with view of charge nanofiltration membranes. The experiments of nanofiltration were conducted by nanofiltration set-up with operational pressure of 0.24 MPa at $25^{\circ}C$ by using synthetic wastewater containing 0.1mg/L of Cr, Fe, Cu, Zn, As, Sn, Pb. Nanofiltration membranes rejected heavy metals much better than chloride, sulfate and TOC, of which concentration in synthetic wastewater was higher than that of heavy metals. To consider rejection characteristics of various metals by nanofiltration membranes, separation coefficient, which is the molar conductivity ratio of the metal permeation rate to the chloride ion or TOC permeation rate, was introduced. In spite of different materials and different nominal salt rejection of nanofiltration membrane used, the separation coefficients of metals were nearly the same. These phenomena were observed in the relationship between the molar conductivity and the separation coefficient for heavy metals.

• Journal of Soil and Groundwater Environment
• /
• v.13 no.1
• /
• pp.101-109
• /
• 2008

The adsorption characteristics of cationic metals such as copper, cadmium, and lead onto the amorphous aluminum oxide, AMA-L, which was mineralized from raw sanding powder at $550^{\circ}C$ were investigated. Additionally, surface complexation reaction of cationic heavy metals onto AMA-L was simulated with MINEQL + software employing a diffuse layer model. From the batch adsorption tests in a single element system, the adsorption affinity of each metal ion onto AMA-L was following order: lead > copper > cadmium. In a binary system composed with copper and cadmium, quite a similar adsorption affinity was observed in each metal ion compared to the single element system. When the surface complexation constants obtained in the single system were used in the prediction of experimental adsorption results, model predictions were well fitted with experimental results of both single and binary systems.

• Analytical Science and Technology
• /
• v.33 no.6
• /
• pp.245-251
• /
• 2020

Lead (Pb) has been shown to be a useful tracer of contamination sources and geochemical processes such as age dating and crustal evolution. These studies require a chromatographic technique for Pb separation from geological samples. This paper presents a comparison study on the effect of eluent concentration between 6M HCl and 8M HCl on the separation of Pb from Pb resin. The results showed that the separation of Pb using 6M HCl as the eluent was not effective compared to the separation using 8M HCl. To verify this method, we measured the Pb isotopic compositions of the Pb isotopic standard (NIST NBS981) and geological reference materials (BCR-2, GSP-2, and JG-1a) using a thermal ionization mass spectrometer (TIMS). The results correspond well with the reported values within the error range, implying that this method can be useful.

• Journal of the Korean Chemical Society
• /
• v.49 no.4
• /
• pp.355-362
• /
• 2005

• Journal of the Korean GEO-environmental Society
• /
• v.2 no.3
• /
• pp.17-35
• /
• 2001

In this study, we conducted a combined adsorption-sequential extraction analysis(CASA) to investigate temperature effects of single adsorption of lead, copper, zinc and cadmium on natural clays. As a result, it was found that in a single adsorption of lead and copper, about 50% of adsorption was occluded in carbonate phase, and in case of cadmium, about 80% of adsorption was occluded in exchangeable phase. At temperature below $25^{\circ}C$ about 60% of zinc was occluded in exchangeable phase but above $40^{\circ}C$ about 50% of zinc was occluded in carbonate phase. The effect of temperature on each occluded phase was largely observed in Fe-oxide, Mn-oxide and organic occluded phases. Besides, the adsorption of metals on natural clays was an endothermic reaction with the exception of exchangeable phase adsorption.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 1999.04a
• /
• pp.302-303
• /
• 1999

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2014.11a
• /
• pp.89-90
• /
• 2014

인쇄회로기판 패턴도금 박리공정 중 발생하는 폐솔더 박리액은 주석, 구리, 철, 납 등 유가금속이 함유된 질산계 폐액이다. 본 연구에서는 이러한 폐솔더 박리액에서 질산과 유가금속을 체계적으로 회수하는 기술을 개발하고자 하였다. 먼저 폐액을 $80^{\circ}C$에서 3시간 정도 반응시켜 주석을 $SnO_2$ 상태로 90% 이상 회수가 가능하였다. 주석이 회수되고 구리, 철, 납만이 존재하는 질산계 폐솔더 박리액에서 확산투석을 이용하여 질산을 94% 이상 회수가 가능하였고 회수된 질산의 농도는 5.1 N 이었다. 질산을 추출한 폐액에서 침전제로 옥살산(Oxalic acid)을 사용하여 구리를 구리옥살레이트 상태로 침전시켜 타금속이온과 선택적으로 분리하였다. 마지막으로 폐액 중 용해되어있는 납을 $65^{\circ}C$이상에서 철 스크랩을 이용한 세멘테이션을 통하여 회수하였다.

• Journal of the Korean Chemical Society
• /
• v.19 no.6
• /
• pp.428-433
• /
• 1975

500 ml of a sample water was extracted with 10 ml of 0.01 % dithizone-$CHCl_3$three times. When $CHCl_3$ layer was back extracted with 10 ml of 0.1 N HCl containing mercuric ion, the free metal ions come into aqueous layer. The aqueous layer was added with 2 ml of 2 N KCl and was washed with 10 ㎖ of $CHCl_3$two times in order to remove the trace dithizone, and then was recorded square wave polarogram. The concentration of copper, lead and cadmium can be determined up to 3 ppb and that of zinc up to 14 ppb with an error of 10 %.

• Journal of the Korean Chemical Society
• /
• v.44 no.2
• /
• pp.115-119
• /
• 2000

A PVC membrane electrode based on upper-rim calix[4] crown as ionophore was prepared using dioctyl sebacate (DOS) as a plasticizer. The potential response of this membrane electrode to alkali, alka-line earth and transitionmetal metal cations were examined. This membrane electrode exhibited a Nernstian response to $10^{-6}{\sim}10^{-2}M\;Pb(NO_3)_2$ with a slope ot 27.0 mV/decade. Its response time ($t_{90}$) was 10s and it could be used for at least 2 months. Also, the potential was maintained constantly in the rage of ph $2.0{\sim}12$.

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.3
• /
• pp.389-395
• /
• 2006

The use of pine bark, a natural adsorbent prepared from Korean Red Pine (Pinus densifloral), was studied for its adsorption behavior of lead ion from aqueous solution. Adsorption experiments were carried out on lead ion concentrations of 10mg/L. Adsorption of lead ion could be described by both Langmuir and Freundlich adsorption isotherms. Treatment of the bark with nitric acid greatly increased initial adsorption rate, and equilibrium sorption capacity increased by approximately 48%. A pseudo second-order kinetic model fitted well for the kinetic behavior of lead ion adsorption onto the bark. Acid-treated bark demonstrated its adsorption capacity quite close to that of granular activated carbon. Results of this study indicated that ion exchange and chelation were involved in the adsorption process.