• Title/Summary/Keyword: 납석

Search Result 69, Processing Time 0.021 seconds

Mechanical Properties of $\beta$-Sialon Ceramics Prepared from Wando Pyrophyllite and an Alkoxide (완도납석과 알콕사이드로부터 제조된 $\beta$-Sialon 세라믹스의 기계적 성질)

  • 이홍림;손연하;임헌진
    • Journal of the Korean Ceramic Society
    • /
    • v.28 no.5
    • /
    • pp.390-398
    • /
    • 1991
  • $\beta$-Sialon powder was prepared from Wando pyrophyllite by the carbothermic reduction and nitridation at 135$0^{\circ}C$ for 10 h nitrogen atmosphere. Amorphous silica prepared from Si(OC2H5)4 was added to Wando pyrophyllite powder in order to control the final Z value. Two different methods were applied for synthesis of $\beta$-sialon powders. In Process A, the amorphous silica prepared from Si(OC2H5)4 was admixed to Wando pyrophyllite powder. Process B was started from the mixture of Wando Y2O3 was added to the synthesized $\beta$-Sialon powders as a sintering aid, and the mixed powders were hot pressed at 175$0^{\circ}C$ for 120 min in nitrogen atmosphere under 30 MPa. Their mechanical properties were compared. The maximum values of M.O.R., hardness and KIC were 667 MPa, 16 GPa and 6.3 MN/m3/2, respectively, and they are the values obtained form $\beta$-Sialon ceramics prepared by process A of Z=0.5.

  • PDF

A Geochemical Study on the Alunite Zone of the Nohwa Pyrophyllite Deposits (노화납석광산에서 산출되는 명반석대에 대한 지구화학적 연구)

  • Shin, Sang Eun;Park, Hong Bong
    • Economic and Environmental Geology
    • /
    • v.25 no.4
    • /
    • pp.373-378
    • /
    • 1992
  • Ores of the Nohwa Pyrophyllite Deposits are composed mainly of pyrophyllite, kaolinite (dickite), quartz, pyrite, alunite and diaspore, etc. Alunite ore zone is located in the middle-lower parts of the deposits. Alunite ore zone with thickness of 20~30 cm is divided into two parts according to alunite contents: reddish and white greyish zone in the upper and lower parts, respectively. And the reddish alunitic ore has higher contents $Al_2O_3$, $K_2O$, $Na_2O$ and Ig.loss than the white greyish alunitic ore. Perhaps alunitization of the deposits occurred in the vicinity of paleo-ground water table. EPMA data shows that sodium replaces potassium considerably in alunite structures and that the hydrothermal solution probably contains considerable amounts of sodium.

  • PDF

Neutralization of Acid Rock Drainage from the Dongrae Pyrophyllite Deposit: A Study on Behavior of Heavy Metals (동래 납석광산 산성 광석배수의 중화실험: 중금속의 거동 특성 규명)

  • 염승준;윤성택;김주환;박맹언
    • Journal of Soil and Groundwater Environment
    • /
    • v.7 no.4
    • /
    • pp.68-76
    • /
    • 2002
  • In this study, we have investigated the geochemical behavior and fate of heavy metals in acid rock drainage (ARD). The ARD was collected from the area of the former Dongrae pyrophyllite mine. The Dongrae Creek waters were strongly acidic (pH : 2.3~4.2) and contained high concentrations of $SO_4$, Al, Fe, Mn, Pb, Cu, Zn, and Cd, due to the influence of ARD generated from weathering of pyrite-rich pyrophyllite ores. However, the water quality gradually improved as the water flows downstream. In view of the change of mole fractions of dissolved Fe, Al and Mn, the generated ARD was initially both Fe- and AA-ich but progressively evolved to more Al-rich toward the confluence with the uncontaminated Suyoung River. As the AR3 (pH 2.3) mixed with the uncontaminated waters (pH 6.5), the pH increased up to 4.2, which caused precipitation of $SO_4$-rich Fe hydroxysulfate as a red-colored, massive ferricrete precipitate throughout the Dongrae Creek. Accompanying the precipitation of ferricrete, the Dongrae Creek water progressively changed to more Al-rich toward downstream sites. At the mouth of the Dongrae Creek, it (pH 3.4) mixed with the Suyoung River (pH 6.9), where pH increased to 5.7, causing precipitation of Al hydroxysulfate (white precipitates). Neutralization of the ARD-contaminated waters in the laboratory caused the successive formation of Fe precipitates at pH<3.5 and Al precipitates at higher pH (4~6). Manganese compounds were precipitated at pH>6. The removal of trace metals was dependent on the precipitation of these compounds, which acted as sorbents. The pHs for 50% sorption ($pH_{50}$) in Fe-rich and Al-rich waters were respectively 3.2 and 4.5 for Pb, 4.5 and 5.8 for Cu, 5.2 and 7.4 for Cd, and 5.8 and 7.0 for Zn. This indicates that the trace metals were sorbed preferentially with increasing pH in the general order of Pb, Cu, Cd, and Zn and that the sorption of trace metals in Al-rich water occurred at higher pH than those in Fe-rich water. The results of this study demonstrated that the partitioning of trace metals in ARD is not only a function of pH, but also depends on the chemical composition of the water.

Neutralization of Pyrophyllite Mine Wastes by the Lime Cake By-Product (부산석회를 이용한 납석광산 폐석의 중화처리)

  • Yoo, Kyung-Yoal;Cheong, Young-Wook;Ok, Yong-Sik;Yang, Jae-E.
    • Korean Journal of Environmental Agriculture
    • /
    • v.24 no.3
    • /
    • pp.215-221
    • /
    • 2005
  • Numerous abandoned or closed mines are present in the steep mountain valleys in Korea due to the depression of the mining industry since the late 1980s. From the mines, enormous amounts of wastes were dumped on the slopes causing sedimentation and acid mine drainage to be discharged directly into streams causing detrimental effects on surrounding environment. Objective of this research was to evaluate the feasibility of the lime cake by-product from the soda ash production (Solvay process) to neutralize the pyrophyllite mine wastes, which have discharged the acid drainage to soil and stream in the watershed. The pH of mine wastes was strongly acidic at pH 3.67 containing over 16% of $Al_2O_3$ and 11% of $Fe_2O_3$. Whereas the lime cake by-product was strongly basic at pH 9.97 due to high contents of CaO, MgO and $CaCl_2$ as major components. Column experiments were conducted to test the neutralizing capacity of the lime cake by-product for the acidic pyrophyllite mine wastes. The column packed with the wastes (control) was treated with the lime cake by-product, calcium carbonate, the dressing soil or combination. The distilled water was eluted statically through the column and the leachate was collected for the chemical analyses. Treatments of the mine wastes with the lime cake by-product (or calcium carbonate) as mixtures increased pH of the leachate from $3.5{\sim}4.0\;to\;7{\sim}8$. Concentrations of Fe and Al in the leachate were also decreased below 1.0 mg $L^{-1}$. A Similar result was observed at the combined treatments of the mine waste, the lime by-product (or calcium carbonate) and the dressing soil. The results indicated that the lime cake by-product could sufficiently neutralize the acid drainage from the pyrophyllite mine wastes without dressing soils.

Mineralogy and Genesis of the Sungsan Clay Deposits (聲山납석광상의 광물학적 및 성인적 연구)

  • Cho, Hyen-Goo;Kim, Soo-Jin
    • Journal of the Mineralogical Society of Korea
    • /
    • v.7 no.1
    • /
    • pp.14-24
    • /
    • 1994
  • The Sungsan clay deposits have been formed by the hydrothermal alteration of volcanic and volcanoclastic rocks of the Hwangsan Formation of Cretaceous age. Claystones are mainly composed of dickite, alunite, illitic minerals and tosudite. The mineralogical properties of clay minerals have been studied using X-ray diffraction analysis, electron microscopy, electron microprobe analysis, and infrared absorption analysis. The physicochemical condition for the clay deposits also have been studied by the activity diagrams and mineral assemblages. Dickite, the dominant mineral in clay deposits, occurs generally as massive aggregates. It shows book-structure of well-defined hexagonal plates. Chemistry of dickite agrees with its ideal formula. Peak depth ratios in infrared absorption spectra were used for discrimination between pure and mixture of kaolin minerals. Five hydrothermal alteration zones are divided according to the mineral assemblages. From center to margin, alunite, dickite, illite and albite zones are discernible. Quartz zone occurs as small lenticular form in dickite zone. The formation of dickite and illite zones are promoted by decreasing $a_{k^+}$. An increase in $a_{H_{2}SO_{4}}$ or $a_{K_{2}SO_{4}}$ is required for the formation of alunite zone. Estimated temperature of formation ranges 110-270 $^{\circ}C$

  • PDF

Mullite Formation and Effect in Porcelain Body by Replacing Kaolinite with Pyrophyllite (납석으로 카올린을 대체한 도자기 소지의 뮬라이트 형성과 특성)

  • Kwak, An-Na;Kim, Geun-Hee;Pee, Jae-Hwan;Kim, Jong-Young;Cho, Woo-Seok;Kim, Kyeong-Ja;Lee, Jong-Keun
    • Journal of the Korean Ceramic Society
    • /
    • v.49 no.3
    • /
    • pp.216-220
    • /
    • 2012
  • Mullite formation in a porcelain body was promoted extensively by replacing kaolinite with pyrophyllite. Effects of mullite formation and vitrification by substitution of kaolinite with pyrophyllite on the mechanical and thermal properties were investigated. Addition of 45-55% pyrophyllite (pyrophyllite (45-55%)-feldspar (30%)-Gairome clay (20%)) could vitrify the sintered samples (water absorption : 0.05%, bulk density : 2.66g/cc) and improve the flexural strength (122MPa) when fired at $1280^{\circ}C$. Mullite formation was found to be decreased with increasing content of pyrophyllite. On the contrary, beyond 50% of pyrophyllite quartz and cristobalite phases was found to be increased. Thermal expansion coefficient of the samples decreased with increase of mullite phase. In triaxial system of pyrophyllite-feldspar-clay, the mullite formation of the samples with 50% pyrophyllite reaches about 78.7% and thermal expansion coefficient was found to be $5.4{\times}10^{-6}/K$.

Geochemistry of Pyrophyllite Deposits in Yangsan-Milyang Areas in Korea (경남 양산 및 밀양지역 납석광상의 지구화학적 연구)

  • Cheong, Young-Wook;Chon, Hyo-Taek
    • Economic and Environmental Geology
    • /
    • v.22 no.4
    • /
    • pp.341-354
    • /
    • 1989
  • Mineralogy and geochemistry of five pyrophyllite deposits in Yangsan-Milyang area such as Cheonbulsan, Dumyong, Dongrae, Youkwang, and Sungjin mines were investigated. Pyrophyllite ores consist mainly of pyrophyllite, sericite, and quartz with some amounts of kaolinite and pyrite. Polytype of pyrophyllite is 2M. Sericite has two polytypes of 1M and 2M1. The ${\delta}^{18}O$ values of pyrophyllite from the Cheonbulsan and the Dumyong mines were measured as 0.23-0.60‰ and 3.40‰, respectively, and those of montmorillonite and kaolinite from the Dumyong mine were in the range of 11.90-12.06‰. This low oxygen isotope composition provides conclusive evidence for hydrothermal activity in the studied area. Contents of major elements are more useful than those of trace elements to discriminate altered zones such as pyrophyllite, sericite, argillic, and andalusite zones from the surrounding rocks. Particularly, contents of $K_2O$, $Na_2O$ and CaO are helpful to identify alteration zones from the discriminant and the cluster analysis of multi-element data.

  • PDF

Genesis of Kaolin-Pyrophyllite Deposits in the Youngnam Area (영남지역 고령토-납석 광상의 성인 연구)

  • Sang, Ki-Nam
    • Economic and Environmental Geology
    • /
    • v.25 no.2
    • /
    • pp.101-114
    • /
    • 1992
  • Occurrences of many kaolin-pyrophyllite deposits in the Youngnam area is related to the Late Cretaceous volcanic rocks, which are widely distributed through southern part from Tongnae-Yangsan to Miryang-Wolsung. The mode of occurrence and genesis of the kaolin-pyrophyllite deposits related to the volcanism was studied. This area is covered by andesitic rocks, rhyolite and rhyolitic welded tuff in ascending order. Lower most andesitic part is almost fresh. The altered rocks in the rhyolitic welded tuff can be classified into the following zones: silicified, pyrophyllite-kaolin, and argillic zone from the center part of ore deposit. The clay deposits occur as irregular massive, layer and funnel type about 5~20 m in width and is accompanied by thin diaspore bed outside of ore shoot. The clays chiefly consist of kaolinite, sericite, pyrophyllite, a little amount of diaspore, alunite, dumortierite, corundum and pyrite. The process of kaolinization-pyrophyllitization has a close relation to a local acidic hydrothermal solution originated from granitic rocks. Acidic hydothermal alteration occurrs mainly in the rhyolitic welded tuff. Initial solution containing $H_2S$ and others was oxidized near the surface and formed hydrothermal sulfuric acid solution.

  • PDF

Mineralogy and Genesis of Hydrothermal Deposits in the Southeastern Part of Korean Peninsula: (1) "Napseok" Deposits in Yangsan Area (우리나라 동남부 지역의 열수광상에 대한 광물학적 및 광상학적 연구 : (1) 양산지역의 "납석" 광상)

  • 김수진;김영규;노진환
    • Journal of the Mineralogical Society of Korea
    • /
    • v.3 no.1
    • /
    • pp.44-57
    • /
    • 1990
  • Mineralogy of clay(Napseok) deposits in Yangsan area has been studied by the methods of field investigation and laboratory works including the polarizing microscopy, X-ray diffraction, infrared spectroscopy, thermal analysis, chemical analysis by electron micro-probe and atomic absorption spectrophotometer, and electron microscopy(SEM and TEM). The Napseok ores in both the Cheonbulsan and Yongcheon deposits consist mainly of sericite, pyrophyllite and quartz, with more or less tourmaline. The high temperature minerals such as corundum and dumortierite are found in the Cheonbulsan deposit, but not in the Yongcheon deposits. Dickite, nacrite, and halloysite are found in the Yongcheon deposit, but not in the Cheonbulsan deposit. The Napseok ores of the Yukwang deposit consist of sericite posits in the Yangsan area. Occurrence, chemistry and structural features of important minerals are described. Mineralogical data of sericite such as intensity raios and chemistry also support that the Napseok deposits of both the Chenobulsan and Yongcheon mines were formed at the higher temperature than those of the Yukwang mine. Presence of sericite-dickite-pyrophyllite ores in the Yongcheon deposit also suggests the lower temperautre than in the Cheonbulsan deposit.

  • PDF

K-Ar Ages of Alunite and Sericite in Altered Rocks, and Volcanic Rocks around the Haenam Area, Southwest Korea (해남지역(海南地域) 화산암류(火山岩類)와 납석 및 고령토 광상(鑛床)의 K-Ar 연대(年代))

  • Moon, Hi-Soo;Kim, Young Hee;Kim, Jong Hwan;You, Jang Han
    • Economic and Environmental Geology
    • /
    • v.23 no.2
    • /
    • pp.135-141
    • /
    • 1990
  • A number of alunite and pyrophyllite deposits occur around the Haenam area where Cretaceous volcanic and volcanogenic sediments are widely distributed. The K-Ar ages of alunite, sericite and whole rocks collected from alunite and pyrophyllite deposits and unaltered rocks representing various stratigraphic horizon of the area were determined and their formation stage was discussed. The ages of volcanic rocks range between $68.6{\pm}1.9$ and $94.1{\pm}2.0$ Ma corresponding to Cenomanian-Maastrichtian of upper Cretaceous. Andesitic rock gives $94.1{\pm}2.0$. Rhyolite and acidic tuffs give $79.47{\pm}1.7$ and $82.8{\pm}1.2$ Ma corresponding to Campanian. The later stage andesite gives $68.6{\pm}1.9$ Ma of Maastrichtian. The results suggest that volcanism of the area can be devided into three different stages. The ages of alunite and sericite range $71.8{\pm}2.8$ to $76.6{\pm}2.9$ Ma of late Campanian to early Maastrichtian which is rather earlier than the age of granite(67 Ma). It indicates that the alteration ages of these clay mineral deposits appeared to be related with its volcanism rather than the hydrothermal stage of granite of this area.

  • PDF