• Title/Summary/Keyword: 날개 보

Search Result 147, Processing Time 0.029 seconds

Application of Preconditioning to Navier-Stokes Equations (예조건화 방법론의 Navier-Stokes 방정식에의 적용)

  • 이상현
    • Journal of the Korean Society of Propulsion Engineers
    • /
    • v.8 no.1
    • /
    • pp.16-26
    • /
    • 2004
  • The objective of this study is to apply preconditioning to Wavier-Stokes equations with a turbulence model. The concept of a pseudo sonic speed was adopted. Roe's FDS was used for spatial discretization, LU-SGS scheme was used for time integration. In order to test the algorithms, the low speed flows around NACA airfoils and the flows through supersonic nozzle were calculated. The algorithm developed in the present study shows good performance in the calculations of low speed viscous flows and supersonics flows.

Characteristics of Cavitation Noise of 2-D Hydrofoils (2차원 날개단면들의 캐비테이션 소음 특성)

  • J.W. Ahn;I.H. Song;K.S. Kim;K.Y. Kim;I.S. Moon
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.37 no.2
    • /
    • pp.14-21
    • /
    • 2000
  • The cavitation noise of 2-D hydrofoils is measured a cavitation tunnel. A new experimental method was developed for the noise measurement of 2-D hydrofoil. Three hydrofoils with the span of 600mm are designed and manufactured to investigate cavitation behavior and noise characteristics. The experimental results show the noise characteristics of various cavitation patterns and the noise performance of the three foils very well. This suggests that low-noise propeller blade section can be developed using the present experimental method.

  • PDF

Characteristics of Cavitation Noise on High-Speed Propellers (고속 프로펠러의 캐비테이션 소음 특성)

  • I.H. Song;J.W. Ahn;K.S. Kim;I.S. Moon
    • Journal of the Society of Naval Architects of Korea
    • /
    • v.37 no.2
    • /
    • pp.22-29
    • /
    • 2000
  • The cavitation noised of high-speed propellers was experimentally studied in KRISO cavitation tunnel. In this paper, a series of cavitation noise tests were carried out for five propellers with various sections and loading distributions. From the experimental results, the noise characteristics of various cavitation pattern and the noise performance of the propellers were analyzed. There can be used for optimum design for high-speed propellers.

  • PDF

흡수불량증후군

  • 윤현중
    • Monthly Korean Chicken
    • /
    • v.63 no.57 s.123
    • /
    • pp.118-121
    • /
    • 2005
  • 육계농장을 방문할 때마다 자주 듣는 이야기가 병아리가 층아리가 많다, 이번 파스는 적다라는 이야기다. 육계에서 층아리를 발생시키는 대표적인 질병이 흡수불량증후군이다. 흡수불량증후군은 빈혈이 도는 닭, 황색 분변, 장내용물고 분변내에 소화가 되지 않은 사료가 보이며 비정상적인 날개(헬리콥터병). 위축, 구루병, 대퇴골두괴사증, 근위염 등의 질병이 한가지 이상 또는 복합적으로 나타나는 질병으로 주로 육계나 백세미에서 증체 지연과 사료효율 감소 등으로 인한 피해를 일으키는 질병이다. 흔히 말하는 층아리 발병이 많게 되는 질병이라 하겠다. 이 병은 레오바이러스, 곰팡이 독소, 아데노바이러스, 엔테로바이러스, 파보바이러스, 혐기성 미생물과 여러 밝혀지지 않은 유전적인 요인까지 복합적으로 원인체가 작용하는 질병이다. 따라서 그 원인을 밝히기가 어려우며, 명확한 대책의 수립도 쉽지 않은 질병이다. 그러나 이 중에서 개연성이 높은 질병인 레오바이러스 감염증을 위주로 해결책을 찾아보기로 하겠다.

  • PDF

항공기 날개 보의 중량경감용 천공 형상연구

  • Lee, Si-Hun;Gong, Du-Hyeon;Sin, Sang-Jun
    • Proceeding of EDISON Challenge
    • /
    • 2017.03a
    • /
    • pp.304-310
    • /
    • 2017
  • In this paper, various webs of I-shaped beam used in aircraft spars are examined. Under the assumption that an aircraft spar is a cantilevered beam with a constant cross-section and is subjected to only bending, four kinds of webs are analyzed for three different sizes. To enable comparison, each hole has the same area and are subjected to the same load by using EDISON 2D Continuum analysis. While circular hole is the most often used, elliptic one is obtained with the minimum von-Mises stress by about 40% decreased. To verify the results gathered by EDISON, comparison was made with ANSYS and analytic predictions obtained with the stress intensity factor K. As comparison shows insignificant discrepancies, it is concluded that a well-designed beam with elliptic holes will be the most efficient spar regarding weight to rigidity ratio in terms of the bending stress.

  • PDF

다중 익형의 상대적 위치 변화에 따른 공력특성 연구

  • Nam, Do-U;Kim, Yeong-Jin;Park, Jin-Hong
    • Proceeding of EDISON Challenge
    • /
    • 2015.03a
    • /
    • pp.623-626
    • /
    • 2015
  • 본 연구에서는 CFD 해석 프로그램 EDISON_CFD를 통하여 2차 세계 대전에 소련에서 제작한 복엽기 AN-2의 기체를 기본 모델로 하여 설제 기체에 사용된 TSAGI P-II-14 airfoil를 이용, 기본 모델의 상단 주익과 미익은 고정하고 하단 주 날개의 위치를 변화시켜 공력특성을 분석하였다. 익형의 평행배치의 경우 기본모델에 비해 양력은 적은 크기로 증가하나 항력이 급격히 증가하여 가장 양항비가 낮은 비효율적인 공력 해석 결과를 보였고 복염기 하단 주익의 돌출은 상단 주익의 돌출에 비해 미세한 양력 감소와 항력 증가를 보여 양항비가 감소하는 현상을 보였다. 상, 하단 주익의 상하 간격이 커질수록 양력은 중가, 항력은 감소하며 간격이 작아질수록 양력의 감소와 항력의 증가를 보였다. 본 연구 해석 결과에 따라 순항조건에서의 익형은 상,하 주익간 수직 간격을 넓게 배치하는 것이 가장 효율적으로 볼 수 있다.

  • PDF

Immunoglobulin G4-Related Disease Involving the Pterygopalatine Fossa, Mimicking Invasive Aspergillosis: A Case Report and Literature Review (침습아스페르길루스증으로 오인된 날개입천장오목에 발생한 면역글로불린 G4 관련 질환: 증례 보고 및 문헌 고찰)

  • Jin Young Son;Jee Young Kim;Jin Hee Cho;Eun Jung Lee
    • Journal of the Korean Society of Radiology
    • /
    • v.82 no.4
    • /
    • pp.1005-1010
    • /
    • 2021
  • We report a case of Immunoglobulin G4 (IgG4) related disease involving the pterygoplataine fossa. A 83-year-old male presented with left ocular pain and visual disturbance. CT showed an isodense soft tissue lesion in the left pterygopalatine fossa with bony sclerotic changes and erosion. MRI revealed an infiltrative soft tissue mass in the left pterygopalatine fossa as a T2 slightly low signal intensity and heterogeneous enhancement. The patient underwent left ethmoidectomy, and biopsy of the mass was conducted. The histopathological diagnosis was IgG4-related disease. In this case, it was difficult to differentiate invasive aspergillosis, which is common in immunocompromised patients, considering the patient's clinical history of diabetes mellitus. This report describes the imaging findings of IgG4-related disease mimicking invasive sinusitis such as invasive aspergillosis.

Computation of Energy Release Rates for Slender Beam through Recovery Analysis and Virtual Crack Closure Technique (차원 복원해석과 가상균열닫힘 기법을 이용한 종방향 균열을 가진 세장비가 큰 보의 에너지 해방률 계산)

  • Jang, Jun Hwan;Koo, Hoi-Min;Ahn, Sang Ho
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.30 no.1
    • /
    • pp.31-37
    • /
    • 2017
  • In this paper, computation results of reducible modeling, stress recovery and energy release rate were compared with the results of VABS, Virtual Crack Closure Technique. The result of stress recovery analysis for 1-D model including the stiffness matrix is compared with stress results of three-dimensional 3-D FEM. Energy release rate of composite beam with longitudinal cracks is calculated and compare verifications of numerical analysis results of 3-D FEM and VABS. The procedure of calculating energy release rate through dimensional reduction and stress recovery is intended to be efficient and be utilized in the life-cycle of high-altitude uav's wing, wind blades and tilt rotor blade.

Evaluation of Reinforcement Effects According to Reinforcement Type and Grouting Method (지반보강재의 형상과 그라우팅 방법에 따른 보강효과 평가)

  • Park, Jongseo;Kim, Taeyeon;Lee, Bongjik
    • Journal of the Korean GEO-environmental Society
    • /
    • v.20 no.8
    • /
    • pp.13-20
    • /
    • 2019
  • In order to ground reinforcement, the chemical grouting, the anchor, the soil nailing system, the micropile, etc. can be mentioned by the methods widely used in domestic. The above ground reinforcement methods are developed by various methods depending on the type of reinforcement, installation method, presence of prestress, grouting method, etc. However, in common, the strength of reinforcement, the friction force of grout and reinforcement and the friction force of grout and ground are the main design variables. Therefore, the optimized ground reinforcement is a material with a high tensile strength of the reinforcement itself, the friction force between the reinforcement and the grout is high, and the application of an optimal grouting method is necessary to improve the friction force between the grout and the ground. In this study, a total of 20 model tests were conducted to analyze the reinforcement effects according to the shape of the reinforcement and the grouting method. As a result of the test, As a result of the experiment, it is judged that the reinforcing effect is superior to the perforated + wing type reinforcement and post grouting method.

Reconsideration of Acer pictum complex in Korea (한국산(韓國産) 고로쇠분류군(分類群)에 대한 재고(再考))

  • Chang, Chin-Sung
    • Korean Journal of Plant Taxonomy
    • /
    • v.31 no.3
    • /
    • pp.283-309
    • /
    • 2001
  • Acer pictum complex (A. pictum Thunb. ex Murray with varieties, A. okamotoanum Nakai, A. truncatum Bunge) in eastern Asia causes frequent difficulty in identification. One hundred twenty five specimens from A. pictum complex of China, Korea and Japan and A. cappadocicum var. sinicum of China were compared to investigate patterns of intra- and interspecific variation and to evaluate a recognition of several species as well as many varieties using 22 characters for morphometric analysis. The first three PCA accounted for 59% of the total variance. No strong discontinuities existed among taxa with respect to fruit and leaf characters. Much overlap among all taxa occurred the central region of the scatter diagram. Many characters appeared to show some clinal variation with changes from east of China to Japan through Korea. This was true not only when all species as considered as a single taxon, but when characters of individual taxa were compared with geography. As one considers a path from the western part of the ranges to areas to the east, the leaves become larger in most respects and become increasingly many lobed (five to seven or nine). In general, there was a tendency toward larger nutlet with smaller wing in the area toward northeast of China (=A. truncatum), while in the east of ranges (Island Ullung-do), plants were larger with respect to characters of fruit and leaves (=A. okamotoanum). The morphological differentiation between A. okamotoanum and Japanese and Korean individuals of A. pictum was not considered sufficient to warrant recognition of either specific or varietal status and should be treated as con specific under A. pictum var. mono. Since the lectotype of Acer pictum had minute hairs uniformly on the under surface of leaves(A. pictum var. pictum), the glabrous type of A. pictum was called A. pictum var. mono as Ohahsi suggested. The univaraite analysis (the mean and maximum/minium of nutlet size and wing/nutlet length ratio) indicated geographical differentiation of northeastern populations, A. truncatum, was distinctive, but Korean individuals of A. truncatum showed an affinity between Chinese individuals of A. truncatum and Korean individuals of A. Pictum var. mono. The current results, together with qualitative character, trunk features, justify subspecific status for this taxon. The previous varieties of A. mono in Korea were indistinguishable from typical form of A. Pictum var. mono on the basis of the wing angle and nutlet size, rejecting continued recognition of these taxa as distinctive varieties. Therefore, it is recommended that only one polymorphic species of A. pictum be recognized in addition to three varieties.

  • PDF