• Research in Plant Disease
• /
• v.22 no.2
• /
• pp.100-106
• /
• 2016

We have studied the mycelia growth of four soil-borne fungal pathogens under light qualities and two lighting types (continuous and intermittent) provided by light-emitting diodes (LEDs). As a result, each mycelia growth on Phytophthora cactorum KACC40166, Athelia rolfsii KACC40170, and Helicobasidium mompa KACC40836 strain showed the similar growth rates within 10% or less difference among treatments compared to dark control, regardless of lighting types. However, the mycelia growth on Rosellinia necatrix KACC40168 strain was significantly suppressed by blue, blue+green and blue+red LED as well as fluorescent lamp compared to a dark control, in common with lighting types. The melanin pigment on R. necatrix KACC40168 strain showed relatively to induce more strongly under green LED and fluorescent lamp, whereas no induction under red LED and a control, regardless of lighting types. Thus, the hypha width on R. necatrix KACC40168 was significantly thinned by blue and blue+green LED compared to a control, in common with lighting types.

• Korean Journal of Plant Resources
• /
• v.24 no.1
• /
• pp.69-75
• /
• 2011

This study was conducted to investigate the variation of cone, seed and germination characteristics among populations and among individuals within populations of Picea jezoensis(Siebold & Zuccarini) Carriere distributed in Korea. Cone collected from 25 trees in two natural populations(Mt. Jiri and Mt. Dokyu) and their thirteen cone and seed characteristics as well as three germination behaviors were analyzed. Statistical analysis showed significant differences among populations and among individuals within populations in 9 traits except for seed breadth, seed weight, index of seed wing and mean germination time. Generally, morphological variation of cone and seed wings from Mt. Jiri population has smaller and longer than those of Mt. Dokyu population. Percentage of sound seeds and Tetrazolium test from Mt. Jiri population showed 1.79 and 1.87 higher values than Mt. Dokyu population, respectively. The maximum germination percentage was obtained at the optimum temperature of $20^{\circ}C$ and in this case, mean germination time and germination rate showed 7.5 days and 2.9 ea./day, respectively. In seed germination behaviors, percentage(40.7%) and rate(0.90 ea./day) of germination in Mt. Jiri population were more higher and faster than those of Mt. Dokyu population(17.7%, 0.37 ea./day). According to correlation analysis, P. jezoensis populations with small restricted distribution may have been reduced because seed qualities were correlated with increased levels of inbreeding and disproportion flowering.

• Tunnel and Underground Space
• /
• v.20 no.1
• /
• pp.65-72
• /
• 2010

Crack-controlled blasting method which utilizes notched charge hole has been proposed in order to achieve smooth fracture plane and minimize the excavation damage zone. In this study, the blast models, which have a notched charge hole, were analyzed using dynamic fracture process analysis software to investigate the effect of the geometry of a notched charge hole and decoupling indexes of the charge hole on crack growth control in blasting. As a result, crack extension increased and damage crack decreased with the notch length. Ultimately, stress increment factors and resultant fracture patterns with different notch length and width were analyzed in order to examine the effect factors on the crack growth controlling in rock blasts using a notched charge hole.

• Journal of Digital Convergence
• /
• v.18 no.5
• /
• pp.465-471
• /
• 2020

This paper aims to maximize the exhibition effect and to emphasize the efficiency of sample information transfer by using the surrealism dephase network technique and beam projection mapping by aesthetically approaching the arrangement of the existing exhibition specimens in the science museum using natural history contents. It presents the limitations of the existing analog natural history sample information transmission in digital form to give viewers interesting and fun and suggests the direction of using digital diorama for sample exhibition.

• Parasites, Hosts and Diseases
• /
• v.31 no.1
• /
• pp.7-12
• /
• 1993

Metaceriae of Parvatrema timondavidi (Digenea; Grmnophallidae) were found from Tapes phillippinarum, one of the most common marine clams in Korean. T. were philippinarum was collected from a fishery market in seoul, and all of the clams eximined were found to contain many gymnophyallid metacercariae. To get adult worms, 10 ICR mice were fed with 100 metacercariae each and sacrificed by cervical dislocation at 7, 10 and 14 mice were morphologically characterized by oval body shape, lage oral sucker with lateral located genital pore from the venttral sucker. Based on these characters they identified as P.timondawvidi Bartoli, 1964. this study first confirms the presence of P. timondawcidi metacercartae in T.philippinarum in Korea.

• Journal of Korean Society of Forest Science
• /
• v.2 no.1
• /
• pp.59-65
• /
• 1962

The objects of this experiment are to find out the local variation of the Dendrolimus Spectabilis Butler, of which sample was first collecteted 15 bodies of male and 35 bodies of female adult at Suwon area. the wing veins and the scale shape have been observed through the microscope (100) and the scale size (from the bottom of the scale to the top of the lobe) has also been measured by the micrometer. The results of this experiment are as follows: 1. There is nodifference between the venation of the male body and that of the female body. Also we can not find any differences between the right and the left wing, and between each body. The fore wings consit of 13 longitudinal veins and the only one "V" shape cross vein which is between the 5th and 6th vein. The hind wings consist of 9 longitudinal veins and the only one "V" shape cross vein which is mentioned above. 2. The scale types are divided into 4 Groups in its shape. (A) The scales of I Group are short and the lower parts of them almost look like a circle, having a small projection at their bottom. The upper parts of them have 2 or 10 lobes. We can find the lobes with fine hairs or the lobes without them at the top of the scales. (B) The scales of II Group are longer than that of I Group. The shape of the lower parts of the scales is similar to that of I Group. The upper parts of the scales have 2 or 10 lobes. (C) The scales of III Group are long and almost alike in a long wedgeshape. The upper parts of the scales have 2 Or IO lobes and we can find long fine hairs at the top of each lobe. (D) The scales of IV Group are long and the shape of the lower parts of the scales is similar to that of III Group. The lobes are short and not sharp. We can find 2 or 9 lobes. 3. The scales of I Group and II Group are distributed on the whole surface except on the outer margin. The most scales of III Group are distributed on the wing base. The scales of IV Group are distributed on the outer margin only. The scales with 4 or 5 lobes are most widely distributed not considering their Group or distributing parts. 4. In I Group the variation of the scale length become gradually greater as the number of the lobes are increasing. In II, III, IV Group, however, the variation of the scale length is in direct opposition to the above mentioned. The variation of the scale width becomes pretty small in any Groups and the scale width become wider as the number of the lobes are increasing. 5. The source of the wing colouration is pigmnetal colour, and the wing colouration is expressed by the amount of brown and white scales.

• Korean journal of applied entomology
• /
• v.35 no.4
• /
• pp.302-308
• /
• 1996

This study was conducted to investigate occurrence and host ranges of Liriomyza trifolii Burgess, American serpentineleafminer, in Chonnam province. Also, temperature effects on the development along with morphologicalcharacteristics in each instar of L. trifolii were studied. L. hifolii was observed from 22 species inthe 7 families. Gerbera, chrysanthemum and tomato were the most damaged host plants. Egg was transparentwhite with lengthlwidth of 0.27 mm10.25 mm while matured larva was yellow with that of 2.03 mm10.80 mmrevealing serpentine gallary under leaf cuticle. Pupa was light brown with that of 1.75 mrn10.74 mm and pupatedon the soil and/or leaf surface. Lengthlwing span of adult was 1.78 mm/3.43 mm. Number of oviposition/sucking punches by L. bifolii adult was 26.1% and 13.3% in tomato and gerbera leaves respectively. Feedingactivity of larval stage was highest at 2OoC. Developmental~threshold (DT) and effective accumulative temperatures(ET) on gerbera leaves were 11.2"C, 33.9DD in egg, 10.3'C, 38.6DD in larva, 10.7"C, 152.3DD inpupa, and 10.8"C, 222.8DD from egg to pupa. On tomato leaves, DT and ET were 13.6"C, 20.2DD in egg, 9.3"C, 43.7DD in larva, ll.O$^{\circ}$C, 114.3DD in pupa, and 11.6"C 178.2DD from egg to pupaDD in pupa, and 11.6"C 178.2DD from egg to pupa pupa.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1017-1021
• /
• 2006

인공순환수로에 정육면체 수리구조물을 구간별로 설치하여 흐름특성에 따른 깔따구의 서식경향을 조사하였다. 정밀한 흐름특성을 분석하기 위하여 난류계산을 수행하였으며, 인공순환수로에 깔따구를 투입하고 3일경과 후 깔따구의 개체수를 조사하였다. 인공순환수로는 단면 폭 29cm, 높이 30cm인 구조로 제작되었으며 직선구간의 길이는 120cm이다. 인공순환수로의 직선구간에 길이 10cm의 정육면체 수리구조물을 20cm 간격으로 양쪽 벽면부에 4개씩 균일하게 설치하였다. 자연하천에서 채집된 원수를 수심 20cm가 되도록 투입한 후 유기물을 하상에 고르게 깔고, 회전날개를 이용하여 평균유속 10cm/s로 안정화 시킨 후 깔따구 투입하였다. 실험시작 3일 경과 후, 깔따구의 서식경향을 조사한 결과 깔따구는 수리구조물 직하류부에 주로 서식하였다. 이는 주 흐름방향 유속분포가 수리구조물 후방에서 급격히 작아져 깔따구들이 정착하기 좋은 환경을 제공하기 때문인 것으로 판단된다. 또한 인공순환수로 직선구간의 안쪽 벽면과 바깥쪽 벽면의 깔따구 개체수는 안쪽 벽면이 바깥쪽 벽면에 비하여 2배 정도 많다. 이는 수리구조물 사이 안쪽 벽면 하상의 시계방향 회전흐름 때문으로 분석되며 상대적으로 이러한 흐름은 바깥쪽 벽면에서 작다. 실험 및 수치해석 결과, 깔따구는 상대적으로 유속이 작은 곳에 서식하며, 이차류의 경향에 따라 서식처를 이동하는 것으로 분석되었다. 향후 생태적 기능을 고려하여 다양한 수리학적 조건 하에서 난류계산 및 유속측정을 통한 연구가 필요하다. 이와 같은 연구는 친환경적으로 하천을 복원시키는데 유용한 자료를 제공할 수 있을 것으로 생각된다.은 silt나 clay보다 입경이 큰 모래나 자갈을 경유 하면서 오염물의 저감효과가 감소한 것으로 판단된다. 그러나 유입유량의 대부분이 표면으로 유출된다는 점을 고려할 때 표면유출수의 오염도를 낮추는 것이 유입오염물 저감효과에 보다 큰 효과가 있을 것으로 판단된다.문에 자료의 이상적 유지 관리가 이루어지며 복잡한 2차원 수질해석 모형을 수월하게 운영할 수 있는 시스템으로 개발하였다.제외하면, 부자측정 방법에 의한 유량산정시 가장 큰 오차원인은 홍수시 측정된 유속측선의 위치와 홍수 전후로 측정된 횡단면상의 위치가 일치하지 않는 점과, 대부분 두 측정 구간의 평균값을 대푯값으로 사용한다는 점이다. 본 연구는 다년간의 유량 측정 및 검증 경험과 자료를 토대로 현장에서 부자를 이용하여 측정된 측정성과를 정확도 높은 유량자료로 산정하는데 있어서의 문제점을 도출하고, 이로 인해 발생하는 오차를 추정하여 그 개선방안을 제시해 보고자한다. 더불어 보다 정확한 유량 산정을 위한 기준과 범주를 제시하고자 한다.리적 특성을 잘 반영하며, 도시지역의 복잡한 배수시스템 해석모형과 지표범람 모형을 통합한 모형 개발로 인해 더욱 정교한 도시지역에서의 홍수 범람 해석을 실시할 수 있을 것으로 판단된다. 본 모형의 개발로 침수상황의 시간별 진행과정을 분석함으로써 도시홍수에 대한 침수위험 지점 파악 및 주민대피지도 구축 등에 활용될 수 있을 것으로 판단된다. 있을 것으로 판단되었다.4일간의 기상변화가 자발성 기흉 발생에 영향을 미친다고 추론할 수 있었다. 향후 본 연구에서 추론된 기상변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.1
• /
• pp.23-33
• /
• 2015

This study was carried out for the purpose of minimizing the area of rapid flow inside the water tank. And the shape of incurrent canal was improved, and then the characteristics of fluid flow occurring inside the water tank was analyzed by using the Computational Fluid Dynamics (CFD) simulation method. better multiple hoe screw nozzle incurrent canal was used instead of conventional drop current canal used for the water tank. And according to the results of analyzing the characteristics of fluid flow, in case a screw blade was installed inside the nozzle, fluid flow was sprayed wide. And wide fluid flow was shown inside the cylindrical water tank too. Besides, a tracer simulation was carried out, in case of installing 1 and 2 multiple hoe screw nozzle incurrent canals at the cubic water tank. As a result, MODAL, MODAL index value was close to 1, in case of installing 2 canals. Therefore, it was possible to obtain the results of being close to the characteristics of plug flow.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.20 no.2
• /
• pp.65-71
• /
• 1984

As a primary step in studying the relationship between the arrangement of netting and the section shape of the bag net in the four-seam trawling net, a series of experiments were performed with the simplified model of the bag net made of vinyl film. This model was suspended horizontally in circularly flowing water, with two pairs of suspending threads to four points of symetry at the border of the bag mouth in place of both wing nets. And then, the area distribution of each panel in the bag net was arranged by the portion of the length of the side panel, q to that of the lower or upper panel, p at the border of bag mouth. In the experiments, the section shape of the bag mouth photographed and the tensions on both pairs of suspending threads were measured with two loadcells in circularly flowing water. From the results that the section shape of the bag mouth in circularly flowing water is controlled by the area distribution of panels in the bag net, the author estimated an experimental equation. h/w=k sub(1) e super(k) 2 super(q/p)+C, where h is the central height of the bag mouth, and w is the lateral width of that.