• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.4 s.175
• /
• pp.900-906
• /
• 2000

Ceramic, PCD and CBN tools are available for the difficult-to-cut-materials such as hardened carbon tool steel, stainless steel, Inconel 718 and etc. Ceramic tools are likely to be chipped and abruptly broken before the appearance of normal wear in turning. Ceramic tools are suitable for continuous in turning, not for intermittent in milling. In this study, TiN/TiCN multi-layer coated ceramic tools were found to restrain the chipping, breaking and early fracture and to increase the critical cutting speed owing to TiN/TiCN multi-layer coating in Arc Ion Plating of PVD method.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.135-138
• /
• 1995

Recently, most of advanced materials used a wide industry field commonly have the characteristics of difficulty-to-cut materials. The cutting of difficulty-ro-cut materials have a variable optimum cutting conditions and methods according to materials. Above all,it is important of understanding to machinability of each materials. Especially, superalloy with Elevated Temperature Strength like as Incone1718 was used in nuclear power equipment and jet engine parts. This research shows a machining characteristics of Heat-Resistant alloy for high efficiency cutting through cutting force,tool wear and cutting temperature in SUS304 and Incone1718.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.1
• /
• pp.25-30
• /
• 2017

The influence of the data deletion method which is one of anti-forensic techniques is substantial in terms of forensic analysis compared to its simplicity of the act. In academic world, recovery techniques on deleted files have been continuously studied in response to the data deletion method and representatively, the file system-based file recovery technique and file format based recovery technique exist. If there's metadata of deleted file in file system, the file can be easily recovered by using it, but if there's no metadata, the file is recovered by using the signature-based carving technique or the file format based recovery technique has to be applied. At this time, in the file format based recovery technique, the file structure analysis and possible recovery technique should be provided. This paper proposes the page recovery technique on deleted PDF file based on the structural characteristics of PDF file. This technique uses the tag value of page object which constitutes one page of PDF file. Object is extracted by utilizing each tag value as a kind of signature and by analyzing extracted object, the metadata of PDF file is recombined and then it's reconfigured page by page. Recovering by page means that even if deleted PDF file is damaged, even some pages consisting of PDF file can be recovered. Generally, if the file system based file is not recoverable, deleted file is recovered by applying the signature based carving technique. The technique which we proposed in this paper can recover PDF files that are damaged. In the digital forensic perspective, it can be utilized to recover more data than previously.

• The Journal of the Korea Contents Association
• /
• v.17 no.9
• /
• pp.203-211
• /
• 2017

The purpose of this study was to determine the association of some adult dental fear and depression, and stress. Among the patients who came to the dental clinic for periodontal treatment, 68 patients who agreed to participate in the study and who met the selection criteria were included. Dental fear, depression symptom questionnaire, salivary cortisol, which can objectively evaluate blood pressure, pulse, and stress. The results of the analysis showed that depressive symptom was related to 'delayed treatment promise', 'cancellation of treatment appointment', 'increased muscle tension', 'rapid breathing when entering dentistry', 'fear when waiting in the waiting room', 'fear when you smell the hospital', 'fear when looking at the dental clinic', 'fear when seeing the anesthetic needle', 'fear when tooth whistle was heard', 'fear when teeth were removed', and 'total fear of dentistry'(p<0.05). Stress symptoms were higher in 'having sweated in the dentist', 'faster pulse', 'fear of entering the dentist' and 'total fear of the dentist'(p<0.05). Based on these results, it is necessary to study the effective methods to control the depressive symptoms and stress of patients who visit dental clinics, and it seems that continuous management is needed to prepare methods such as relaxation therapy for dental fear patients.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.04b
• /
• pp.451-453
• /
• 2001

제스쳐(gesture)는 마우스 또는 스타일러스의 난일 표시(single mark)를 이용하여 객체들과 기능들을 식별하는 문서 편집 도구의 강력한 방법들 주 하나이다. 마우스를 위한 제스쳐는 주로 데스크 팁 기반의 환경을 위해 개발되어지고 스타일러스를 위한 제스쳐는 보통 휴대용 컴퓨터를 위해 개발되어진다[2]. 현대는 PDA(Personal Digital Assistant)시스템의 스타일러스를 위한 제스쳐 개발이 활발하게 이루어지고 있다.[3]. 하지만 PDA 시스템에서는 인식에 의한 문자 입력의 보조 도구 정도의 수준에서 제스쳐가 사용되어진다. 본 논문에서는 PDA 시스템에서 사용되는 키보드의 키 역할을 하는 기존의 제스쳐와는 달리 사용자 입력과 제스쳐에 차별을 두지 않고 한 화면에서 직접적이 제스쳐가 가능한 환경을 개발하고 다양한 제스쳐 인식 방법을 제안한다. PDA 시스템에서의 제약을 최소화하기 위해 펜 기반의 입력에서 각 스트록을 간략화시켜 정보를 최소호 한 뒤 각 스트록을 양방향 연결 리스트를 이용해 연결하였다. 제스쳐(gesture)는 삽입, 삭제의 기본적인 것들을 비롯하여 이동, 복사, 붙임과 같은 제스쳐도 포함되어 있다. 제스쳐(gesture)의 인식은 각 스트록의 바운딩 박스와 점들의 위치 정보, 스트록 생성 순서에 기반하여 이루어지기 때문에, 이로 인해 펜 기반의문서 에디터 사용에서 요구되는 다른 제약 없이 오로지 펜만으로 모두 편집 환경을 구현할 수 있다.

• The Korean Journal of Air & Space Law and Policy
• /
• v.24 no.1
• /
• pp.35-58
• /
• 2009

A treaty that governs the compensation on damage caused by aircraft to the third parties on surface was first adopted in Rome in 1933, but without support from the international aviation community it was replaced by another convention adopted again in Rome in 1952. Despite the increase of the compensation amount and some improvements to the old version, the Rome Convention 1952 with 49 State parties as of today is not considered universally accepted. Neither is the Montreal Protocol 1978 amending the Rome Convention 1952, with only 12 State parties excluding major aviation powers like USA, Japan, UK, and Germany. Consequently, it is mostly the local laws that apply to the compensation case of surface damage caused by the aircraft, contrary to the intention of those countries and people who involved themselves in the drafting of the early conventions on surface damage. The terrorist attacks 9/11 proved that even the strongest power in the world like the USA cannot with ease bear all the damages done to the third parties by the terrorist acts involving aircraft. Accordingly as a matter of urgency, the International Civil Aviation Organization(ICAO) picked up the matter and have it considered among member States for a few years through its Legal Committee before proposing for adoption as a new treaty in the Diplomatic Conference held in Montreal, Canada 20 April to 2 May 2009. Accordingly, two treaties based on the drafts of the Legal Committee were adopted in Montreal by consensus, one on the compensation for general risk damage caused by aircraft, the other one on compensation for damage from acts of unlawful interference involving aircraft. Both Conventions improved the old Convention/Protocol in many aspects. Deleting 'surface' in defining the damage to the third parties in the title and contents of the Conventions is the first improvement because the third party damage is not necessarily limited to surface on the soil and sea of the Earth. Thus Mid-air collision is now the new scope of application. Increasing compensation limit in big gallop is another improvement, so is the inclusion of the mental injury accompanied by bodily injury as the damage to be compensated. In fact, jurisprudence in recent years for cases of passengers in aircraft accident holds aircraft operators to be liable to such mental injuries. However, "Terror Convention" involving unlawful interference of aircraft has some unique provisions of innovation and others. While establishing the International Civil Aviation Compensation Fund to supplement, when necessary, the damages that exceed the limit to be covered by aircraft operators through insurance taking is an innovation, leaving the fate of the Convention to a State Party, implying in fact the USA, is harming its universality. Furthermore, taking into account the fact that the damage incurred by the terrorist acts, where ever it takes place targeting whichever sector or industry, are the domain of the State responsibility, imposing the burden of compensation resulting from terrorist acts in the air industry on the aircraft operators and passengers/shippers is a source of serious concern for the prospect of the Convention. This is more so when the risks of terrorist acts normally aimed at a few countries because of current international political situation are spread out to many innocent countries without quid pro quo.