• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.479-491
• /
• 2012

In this paper we performed evaluation of the economics of a district heating system (DHS) consisting of energy suppliers and consumers, heat generation and storage facilities and power transmission lines in the capital region, as well as identification of optimal operating conditions. The optimization problem is formulated as a mixed integer linear programming (MILP) problem where the objective is to minimize the overall operating cost of DHS while satisfying heat demand during 1 week and operating limits on DHS facilities. This paper also propose a new forecasting model of the system marginal price (SMP) using past data on power supply and demand as well as past cost data. In the optimization, both the forecasted SMP and actual SMP are used and the results are analyzed. The salient feature of the proposed approach is that it exhibits excellent predicting performance to give improved energy efficiency in the integrated DHS.

• Proceedings of the SAREK Conference
• /
• 2004.11a
• /
• pp.59-59
• /
• 2004

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.7 no.3
• /
• pp.160-166
• /
• 1978

Heat loss to the ground in ondol heating system is analyzed mathematically using conformal mapping and variable transformations, Both two-and three-dimensional systems are analyzed. Heated house is assumed to be rectangular shape. Mean value of heat loss to the ground can be obtained using Figure 2. Effects of thermal parameters to heat loss are discussed. Numerical examples are also given.

• Plant Journal
• /
• v.10 no.3
• /
• pp.45-51
• /
• 2014

This study performs several experiments on a newly developed temperature safety system that can be used for residential building heating systems, the heat source of which is derived from a conventional fuel cell. Prior to this, the hot water made from a fuel cell was not used in residential housing but just went to waste. The present safety system is installed in the current underfloor heating system. At first we used the CFD technique to develop a new heat exchanger. The fuel cell must satisfy the thermal conditions of the inlet temperature being $55^{\circ}C$ and the outlet temperature being $60^{\circ}C$. But variations in weather cause fluctuations in the heating water temperature. The experimental results show our new system capable of maintaining the temperature difference within a ${\pm}0.5^{\circ}C$ range. So we believe that our new PFMFC fuel cell stack array is a good candidate for being used in residential heating systems.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.3
• /
• pp.277-284
• /
• 2013

In this paper, the ventilating and heating system of T-103 trainer aircraft were investigated and redesigned to improve its poor performance. The ventilation system of the trainer was designed to increase the mass flow rate of fresh air by using air intake valves. The flow-in air through the air intake valve is supplied to the cabin by the ram effect of aircraft and the propeller. And the additional heating system was installed to improve the temperature of the cabin inside. The wasted heat from the exhaust gas of the engines was used as heat source of the additional heating system by installing an heat exchanger around the exhaust nozzle. The additional fresh air and the heated air enter the cabin via two ducts mounted under the instrument panel and behind the pedal in the cabin. The additional ventilating and heating system can be controlled by the first pilot and the secondary pilot individually using the control knob equipped separately. After mounting the additional ventilating and heating system, evaluations such as inspection of parts and component, ground run-up test, in-flight test, user test, etc. were conducted. The result of the tests was sufficient to meet the requirements of the manuals, and the pilots were satisfied with the additionally mounted systems.

• Nuclear Engineering and Technology
• /
• v.27 no.2
• /
• pp.269-279
• /
• 1995

가압경수로에서 증기발생기와 같은 주기기를 원자로 내부에 위치하도록 설계한 원자로를 일체형 원자로라고 분류하며, 기존 상용원자로와 같이 모든 주기기가 별도의 압력용기로 설계되어 배관계통에 의해 원자로 외부에 순환회로를 갖는 형태의 원자로를 분리형원자로라고 한다. 최근에 개발되고 있는 한 부류의 신형원자로에서는 원자로 및 계통의 단순성 추구와 계통의 높은 신뢰성으로 안전성 향상을 위해 동력원 사용 등의 능동적 안전개념 보다는 자연현상을 이용하는 피동안전개념이 널리 도입되고 있다. 본보고서에서는 이러한 신형원자로의 노형으로서 일체형원자로의 특성을 전통적인 분리형원자로와 비교, 분석, 평가하였다. 일체형원자로의 가장 큰 장점은 모든 주기기가 단일 압력용기 내에 위치하므로 일차계통이 매우 단순하고 대구경 배관이 없기때문에 대형 냉각재 상실사고가 근본적으로 방지되어 안전계통이 매우 단순하다는 것이다. 이 외에도 일체형원자로는 대단히 많은 일차냉각재 용량, 매우 큰 가압기 용량및 긴 운전원 조치시간등의 설계특성을 보유하고 있어 안전성이 탁월하다는 장점을 지니고 있다. 그러나, 일체형원자로는 모든 주기기가 단일 압력용기 내에 설치되므로 대형 원자로 용기가 요구되며, 원자로 압력용기의 제작성 및 운송 능력이 원자로의 용량을 제한하는 주된 요인이 된다. 일체형원자로의 활용으로 열병합 발전, 지역난방 및 선박용 원자로등의 중소형 원자로에 매우 적합하다고 판단되며, 뛰어난 안전성으로 인하여 사회적 수용성 이 강조되는 상용발전로로서도 적합한 노형이 될 수 있을 것으로 분석되었다.

• JOURNAL OF ELECTRICAL WORLD
• /
• s.352
• /
• pp.49-55
• /
• 2006

한전, 美國『PLMA 需要管理 대상』 수상/ 일반주택 태양광, 전년보다 120만 싸게 설치한다/ 2030 국가에너지기본계획 수립 착수/ 한 · 일 전력계통 신뢰도 심포지움 개최/ 중부발전, 양구 풍력단지사업 추진/ 서부발전, 신바람 리더십 워크샵 개최/ 동서발전, 「2006 대한민국 BSC 포럼」우수사례 발표/ 한국수력원자력(주), 협력기업에 금융지원/ 남부발전, 워크샵을 통한 기술교류 및 이해기반 확충으로 국내 발전소 건설사의 해외경쟁기반 강화/ 남동발전, UN「Global Compact」와 협약 체결/ 두산重, 캄보디아 관광소도시에 "사랑의 물" 나눈다/ 지역난방공사, 3년 연속 윤리경영 우수 공기업 선정/

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.87-88
• /
• 2008

현재 전국적으로 많은 곳에 SPS(고장파급방지장치)가 설치되어 운영중에 있으며 대부분은 345kV이상 대단위 전원단지 인근에 설치되어 있으나 강원지역의 경우는 154kV 계통에 다수가 설치되어 운전중에 있다. 강원지역은 지역적 특성으로 인해 장거리 송전선로가 많으며 전원단이 원거리에 위치하여 고장시 전압불안정에 의한 계통붕괴의 위험성이 타 지역보다 높다. 특히 하계에 비해 난방부하 및 심야전력의 영향으로 최대부하가 대폭 증가하는 동계의 경우 이러한 특성이 더욱 두드러지는데 2007년 동계피크시 부하실적 및 역률을 기준으로 부하특성 및 부하역율 변동에 따른 계통영향을 분석하여 기 설치 운영중인 SPS 적용의 타당성 및 유지여부에 대한 판단 및 SPS 적용 개선(안)을 제시하였다.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.22 no.2
• /
• pp.135-146
• /
• 2020

In the strawberry cultivation areas and domestic farms, two-spotted spider mites are the most serious pests. It decreases the product yield due to the direct feeding of chlorophyll by the mites resulting in reduced photosynthetic ability of host plant. In this study, a simplified acaricidal effect evaluation system (SAEES) was employed to choose the effective acaricidal products among 10 items based on leaf-dipping bioassay methods. SAEES had the advantage of being able to screen four commercial products with three replications at the same time in the recommended concentration. The susceptible strains (SL_YS) showed a high mortality rate of about 90-100%, whereas the mortality of local strains was differed by each acaricides. It suggests that the acaricide responses of field populations might differ due to spray frequencies and acaricide product. An efficacy index (0.8-1.0) was determined based on the mortality of susceptible strain, which would allow the most effective commercial products to be selected by the range of this index. In summary, SAEES will enable the selection of effective commercial products and contribute to increasing control against T. urticae in strawberries.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.1
• /
• pp.49-56
• /
• 2016

Flapper Valve of Korean Utility Helicopter(KUH-1) is an essential equipment in Environmental Control System(ECS) for pilot to perform flight mission. It provides pilots and crews with heating, ventilating and air conditioning. It has function of maintaining room temperature to sustain operational capability for pilot and crew. This paper summarizes pilot comments in flight test which are classified by cause of occurrence and the troubleshooting process about each comment. It also describes design improvements which was derived from troubleshooting and suggests verification results of flight test at low temperature.