• 제목/요약/키워드: 난류 분류

검색결과 131건 처리시간 0.026초

남해 연안 동물플랑크톤 군집의 계절변동 (Seasonal Variation of Zooplankton Communities in the Southern Coastal Waters of Korea)

  • 문성용;오현주;서호영
    • Ocean and Polar Research
    • /
    • 제32권4호
    • /
    • pp.411-426
    • /
    • 2010
  • 남해 연안에 출현하는 동물플랑크톤 군집의 계절 변화와 주요 분류군의 변동 양상을 파악하기 위해 2005년 5월부터 2006월 2월까지 사계절 동안 실시하였다. 사계절 동안 출현한 동물플랑크톤은 전체 74개 분류군이 출현하였고, 평균 출현 개체수는 2,426~23,793 indiv./$m^3$ 범위였으며, 이 중 N. scintillans가 가장 우점하는 분류군이었다. 동물플랑크톤 주요 분류군은 N. scintillans, A. omorii, A. erythraea, P. parvus s. l, 십각류 유생, Aidanosagitta crassa, 따개비 유생으로 나타났다. 여름철의 동물플랑크톤의 종 다양성 지수는 내만 해역에서 주로 높게 나타났으며, 가을철에 외만에 위치하는 조사해역에서 낮게 나타났다. 이것은 남해 연안의 동물플랑크톤 출현 개체수 변동이 계절에 따른 수온, 염분과 엽록소-a 농도, N. scintillans의 대량 증식에 따라서 변동할 수 있으며, 또한 계절에 따른 대마난류의 세력확장에 따라서 조절될 수 있음을 시사한다.

한국 연근해에서 하계에 출현하는 Corycaeidae (Copepoda : Cyclopoida)의 분류 및 분포 (Taxonomy and distribution of Corycaeidae (Copepoda: Cyclopoida) in the Korean Waters in Summer)

  • 강영실;허성회;이삼석
    • 한국해양학회지
    • /
    • 제25권2호
    • /
    • pp.49-61
    • /
    • 1990
  • 1986년 8월 한국 연근해에서 출현하는 Corycaeidae를 분류학적으로 연구하였다. 본 연구에서 기재된 종은 2속 3아속 9종으로 Corycaeus (Corycaeus) speciosus, G.(C.) crassiusculus, C. (Ditrichocorycaeus) affinis, C.(D.) andrewsi, C.(D.) erythraeus, C.(Onychocorycaeus) pacificus, c.(O.) catus, C.(O.) agilis, and Farranula gibbula 였다. 각 출현종의 분포를 보면 C. (O) affinis는 연안, 내만성종 의 특성을 나타내었으며, C.(C.) speciosus, C.(C.) crassiusculus, C.(O.) catus, andrewsi C.(D.) catus 및 Farranula gibbbula는 난류, 외양성종의 특성을 나타내었 다.

  • PDF

동축이중원관 분류에 있어서의 유동 특성에 관한 연구 (A Study on the Flow Characteristics in Double Coaxial Pipe Jets)

  • 신창환;김경훈
    • 한국분무공학회지
    • /
    • 제1권4호
    • /
    • pp.46-53
    • /
    • 1996
  • The present study is aiming at improving the performance of main nozzle of an air jet loom with a modified reed and auxiliary nozzles. The double coaxial pipe jets consisting of a central air jet and an annular air jet have been experimentally investigated. The duter jet has a potential core and a constant velocity. The inner jet through an inner long pipe is induced by the subatmospheric pressure near the inner nozzle edge, and the jet velocity of an inner pipe is always lower than that of a outer pipe. The static pressures of the main nozzle over a wide range of the nozzle tank pressure were measured, and the nozzle velocity and Mach numbers were analytically calculated. Experiment81 results indicate that the critical condition of Mach number of unity to occur at the two positions in a main nozzle; one of them is the needle tip and the other is the acceleration tube exit An increase in the tank pressure causes the critical throat condition to occur at the two positions above. The velocity of acceleration-tube exit is maximum at the critical length L* and flow patter in acceleration-tube over critical lengh remains unstable.

  • PDF

한국산 놀래기아목(농어목) 어류의 분류와 분포 (A Revision of the Suborder Labroidei(Pisces: Perciformes) from Korea)

  • 이완옥;김익수
    • 한국어류학회지
    • /
    • 제8권1호
    • /
    • pp.22-48
    • /
    • 1996
  • 1988년 9월부터 1996년 3월까지 우리 나라의 전 연안에서 채집된 놀래기아목(亞目)(Labroidei) 어류에 대하여 분류학적으로 재검토하고, 미세 분포를 조사하였다. 한국산 놀래기아목 어류는 자리돔과(Pomacentridae), 키크리과(Cichlidae), 망상어과(Embiotocidae), 놀래기과(Labridae)와 파랑비늘돔과(Scaridae)의 5과에 22속(屬)32종(種)으로 정리되어, 이들의 과, 속 및 종 검색표를 제시하였다. 본 조사에서 직접 표본을 입수한 15속 21종은 표본을 중심으로 계수 계측형질을 재 기재하였다. 이중에 1996년 3월 전남 완도에서 채집된 망상어과 어류 Ditrema viridis Oshima는 국내에서는 처음으로 보고되는 종이다. 외래도입종인 키크리과 어류를 제외한 대부분의 놀래기아목 어류는 쿠루시오 난류의 영향을 받는 제주도 연안과 남해안, 그리고 동해 남부와 울릉도 근해에까지 분포하였다.

  • PDF

2차원 충돌 분류계에서 사다리형 로드 배열에 의한 열전달 촉진 효과 (A Study on the Heat Transfer Enhancement by Trapezoid Rod Arrays in 2-Dimensional Impinging Jet System)

  • 임태수;금성민;이창언
    • 대한기계학회논문집B
    • /
    • 제25권11호
    • /
    • pp.1659-1666
    • /
    • 2001
  • The objective of this study was to investigate the characteristics of air flow and heat transfer caused by trapezoid rods array in impinging air jet system. Trapezoid rods have been set up on front of flat plate to act as a turbulence promoter. Local Nusselt numbers were determined as a function of three parameters : (a) the space from re(Is to heating surface(C=1, 2, 4mm), (b) the pitch between each rods(P=30, 40, 50mm), (c) the distance from nozzle exit to flat plate(H/B=2, 6, 10). The measurements were compared with those of the experiment without trapezoid rods. As a result, when rods are installed in front of the impinging palate, the acceleration of the flow and the eddies due to the rods seem to contribute to the heat transfer enhancement. Heat transfer performance was best under the condition of C=1mm and as the pitch is 30mm. The maximum rate of heat transfer augmentation is about 1.9 times greater compared to that without trapezoid rods.

횡분류(流)(橫噴流)에서 난류 비예흔합 화염의 화염날림에 대한 거대 와(渦)구조 혼합 모텔 적용 (A Large-scale Structural Mixing Model applied to Blowout of Turbulent Nonpremixed Jet Flames in a Cross Jet Flow)

  • 이기만;박정
    • 대한기계학회논문집B
    • /
    • 제26권1호
    • /
    • pp.133-140
    • /
    • 2002
  • This article presents an application of a large-scale structural mixing model(Broadwell et at. 1984) to the blowout of turbulent reacting cross flow jets. Experimental observations, therefore, aim to identify the existence of large-scale vortical structure exerting an important effect upon the flame stabilization. In the analysis of common stability curve, it is seen that the phenomenon of blowout are only related to the mixing time scale of the two flows. The most notable observation is that the blowout distance is traced at a fixed positions according to the velocity ratio at all times. Measurements of the lower blowout limits in the liftable flame are qualitatively in agreement with the blowout parameter $\xi$, proposed by Broadwell et al. Good agrement between the results calculated by a modified blowout parameter $\xi$'and the present experimental results confirms the important effect of large-scale structure in the stabilization feature of blowout.

2020년 하계 장강 저염수가 이어도 해양과학기지 주변 해역의 식물플랑크톤 다양성 및 개체수 변화에 미치는 영향 (Phytoplankton Diversity and Community Structure Driven by the Dynamics of the Changjiang Diluted Water Plume Extension around the Ieodo Ocean Research Station in the Summer of 2020)

  • 김지훈;최동한;이하은;정진용;정종민;노재훈
    • 해양환경안전학회지
    • /
    • 제27권7호
    • /
    • pp.924-942
    • /
    • 2021
  • 여름철 장강 저염수의 확장은 북부 동중국해의 환경 및 식물플랑크톤 다양성과 군집구조에 영향을 미치는 주요 요인으로 알려져 있다. 2020년 하계는 장강 저염수의 방류량이 매우 높았던 시기로 환경 특성 변화에 따라 식물플랑크톤 다양성 및 군집구조에 미치는 동력을 이해하기 위해 현장관측을 수행하였다. 2020년 8월 16일~17일 이어도호 승선조사와 2020년 8월 15일~21일 이어도 해양과학기지(IORS)에서 체류조사를 실시하였다. 조사 정점들에서 CTD로 측정한 결과 조사 수역 남서쪽은 장강 저염수의 영향을 받아 염분이 낮고 엽록소 형광값이 높았으며, 대마난류의 영향을 받은 남동수역은 염분이 높고 엽록소 형광값이 낮았다. 12개 정점의 표층수 시료의 엽록소 a 농도는 미소형(20~3 ㎛) 및 소형(> 20 ㎛) 식물플랑크톤의 생체량이 우점함을 나타냈으며, 대마난류수의 영향을 받은 정점에서만 초미소 식물플랑크톤(< 3 ㎛) 생체량이 약 50%를 차지하였다. 이러한 표층수의 식물플랑크톤 크기 분포는 영양염류 공급과 관련되어 장강 저염수의 높은 질산염 공급을 받는 정점들은 소형 식물플랑크톤의 생체량 기여율이 높았다. 형태분류 결과 미소형 및 소형 식물플랑크톤은 총 45종이며, 이들 중 우점 분류군은 규조류인 Guinardia flaccida, Nitzschia spp.와 와편모조류인 Gonyaulax monacantha, Noctiluca scintillans, Gymnodinium spirale, Heterocapsa spp., Prorocentrum micans, Tripos furca 등이었다. 대마난류의 영향을 받으며 질산염 농도가 낮은 정점들은 광합성 초미소 진핵생물(PPE)의 개체수와 광합성 초미소 원핵생물(PPP)인 Synechococcus의 개체수가 높았다. 질산염/인산염 비는 대부분 정점에서 인산염 제한을 받고 있음을 나타냈다. 유세포 분석 결과 Synechococcus 개체수는 난류의 영향을 받는 빈영양 수역의 정점들에서 높은 개체수를 보였다. NGS 분석 결과 PPP 중 Synechococcus는 29개의 clades가 나타났고, 이 중 한 시료에서 한 번이라도 1% 이상의 우점율을 보인 clade는 11개로 나타났다. 표층수에선 clade II가 우점분류군이었으며 SCM 층에서 다양한 clades(I과 IV 등)가 차우점군들로 분포하였다. Prochlorococcus 속은 난류 수역에서 high light adapted 생태형이 출현하는 양상을 보였으며 북쪽 수역에선 출현하지 않았다. PPE는 총 163개의 높은 operational taxonomic units(OTUs) 다양성을 보였으며, 이 중 한 시료에서 한 번이라도 5% 이상의 우점률을 나타낸 OTU는 총 11개였다. 장강 저염수의 영향을 받는 정점의 표층수에선 Amphidinium testudo가 우점 분류군이었으며, SCM 층에서 녹조류가 최우점하였다. 대마난류의 영향을 받는 해역에서는 다양한 분류군의 착편모조류가 우점하였다. IORS에서의 관측 결과도 주변 정점들과 식물플랑크톤 생체량, 크기분포, 다양성에서 유사한 수준을 나타냈다. 이번 연구 결과는 장강 저염수의 영향에 따른 식물플랑크톤의 반응을 다양한 분야에서 확인할 수 있었다. 또한, IORS와 승선조사를 비교하여 IORS 관측이 장강 저염수의 식물플랑크톤 동적 역학 모니터링에 활용할 수 있음을 확인하였다. 향후 기후변화에 따라 나타날 동중국해 하계 환경 및 생태계의 변화에 대비하여 IORS의 효과적 이용 방안 수립이 필요할 것으로 판단된다.

측벽부착형 순류체소자의 분류재접합 모델에 관한 연구 (Analytical Steady-State Jet Reattachment Model for a Wall-Attachment Fluid Amplifier)

  • ;장효환
    • 대한기계학회논문집
    • /
    • 제7권2호
    • /
    • pp.218-225
    • /
    • 1983
  • 측벽부착형 순유체조자에서 제어입력이 존재할 때 2차원 난류제트가 오프셋된 경사면에 재접합하 는 현상을 연구하였고 정상상태하의 재접합모델을 이론적으로 전개하였다. 순유체조자의 상하면 이 제트의 확산에 미치는 영향을 조사하기 위하여 제트의 중심선에 따라 최대속도를 측정하였고, 그 결과에 따라 본 모델에 사용한 제트확산계수(.sigma.)의 값은 자유제트의 것 (.sigma.=7.67)보 다 큰 .sigma.=10.5로 택하였다. 이론적 모델을 확증하기 위하여 제트의 재접합점과 변형각도에 관한 기존 논문에 보고된 실험적 연구결과와 비교하여 좋은 일치를 보았다.

노즐 형상 및 입경에 따른 난류 분류중의 미립자 유동 특성에 관한 연구 (A Study of Particle Motion for Nozzle Geometry and Particle Diameter in Turbulent Jet Flow)

  • 김종철;황승식;전운학
    • 한국자동차공학회논문집
    • /
    • 제7권6호
    • /
    • pp.17-31
    • /
    • 1999
  • This paper is a review of the results of examining the flow characteristics of gas and particles with regards to pipe-type nozzle and converging nozzles depending on nozzle geometry. The nozzles used in this experiment are the pipe-type nozzle which can sufficiently mix the gas and particles, and the converging nozzle which can rapidly accelerate fluid . The particles used at the time of this experiment each measured 0.8, 30, 60 and 80${\mu}{\textrm}{m}$ in the diameter. The Phase Doppler Particle Analyzer was used to measure the velocity of each particle, and the Hot-wire probe was used to measure the spectrum in order to analyze the flow near the nozzle exit of the 0.8${\mu}{\textrm}{m}$ particle.

  • PDF

Mesh 스크린을 이용한 충돌제트 열전달 제어에 관한 연구 (Control of Impinging Jet Heat Transfer with Mesh Screens)

  • 조정원;이상준
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2000년도 추계학술대회논문집B
    • /
    • pp.267-271
    • /
    • 2000
  • The local heat transfer rate of an axisymmetric submerged air jet impinging on normal to a heated flat plate was investigated experimentally with varying solidity of mesh screen. The mean velocity and turbulent Intensity profiles of streamwise velocity component were measured using a hot-wire anemometry. The temperature distribution on the heated flat surface was measured with thermocouples. The screen installed in front of the nozzle exit(behind of 35mm) modify the jet flow structure and local heat transfer characteristics. For higher solidity screen, turbulence intensity at core lesion is high and increases the local heat transfer rate at nozzle-to-plate spacings(L/D<6). For larger nozzle-to-plate spacings(L/D>6), however, the turbulent Intensities of all screens tested in this study approach to an asymptotic curve, but the small mean velocity at the core region reduces the local heat transfer rate for high solidity screens.

  • PDF