• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.567-572
• /
• 1997

범용 전산유체해석(Computational Fluid Dynamics) 코드인 CFX-F3D를 이용하여 봉 다발에서의 난류 유동 수치해석을 수행하였다 3$\times$3 봉으로 구성된 부수로 사이의 난류 횡류(Crossflow) 혼합유동과 평행한 4개의 봉으로 이루어진 벽 수로에서의 난류 유동구조를 수치적으로 분석하여 각각의 실험결과와 비교하였다. 부수로 횡류 혼합유동의 경우 예측된 주 유동방향 평균 속도분포는 실험결과와 잘 일치하였으나 벽면과 인접한 부수로에서의 난류강도 분포는 다소 큰 차이가 나타났다. 백수로의 경우 수로 중심선 근처의 주 유동방향의 속도변화는 크게 예측되었고 벽 전단응력은 유로가 협소해지는 영역에서 낮게 예측되었으나 전반적으로 실험결과와 유사한 유동특성을 나타냈다. 이 연구는 봉 다발에서의 난류 유동구조에 대한 이해를 증진시킴과 더불어 CFX-F3D 코드를 평가함으로써 향후 지지격자와 임계열유속 증진장치가 부착된 복잡한 형상의 핵연료 다발에서의 유동장 수치해석의 기반을 마련하였다.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.742-747
• /
• 2001

A study on the ultrasonic effect for turbulence enhancement is carried out in the horizontal flow field of a coaxial circular pipe. A large transparent acryl tank is made to perform several experiments for the above research. The front flow field from jet exit is divided as 4 measuring regions to observe characteristics of the above flow field according to those with and without ultrasonic. An ultrasonic transducer with 2MHz high frequency is used to give them the ultrasonic forcing. Characteristics such as the velocity distribution, the kinetic energy and the turbulence intensity are visualized, observed, examined and considered at Re No. 2000. In results, it is clarified that the ultrasonic increases the turbulence enhancement. And the optimum and harmonious intensity suited to the power of flow is needed to maximize the turbulence enhancement.

• Journal of Power System Engineering
• /
• v.5 no.3
• /
• pp.31-37
• /
• 2001

A study to obtain the enhancement of turbulence at low Reynolds number is carried out by adding ultrasonic force into the jet flow field of a coaxial circular pipe which can afford the sufficient data of flow characteristics with the shear flow and turbulence flow in spite of its simple shape. A coaxial circular flow field is made vertically in a large and transparent acryl tank. The time mean velocity vector, distribution, kinetic energy and turbulence intensity formed in the complex flow field of turbulence enhancement are investigated, observed and discussed at Reynolds number of 2,000, 3,000 and 5,000 by using PIV measurement, in results, the validity of ultrasonic to obtain the enhancement of turbulence is certified.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.110-113
• /
• 2007

LES code was developed and verified to investigate the turbulence evolution in the gas generator equipped with turbulence ring. We compared mixing enhancement of various turbulence rings having different shape and size. To qualify the mixedness, we used two perturbation values of energy and enstrophy.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.6 no.4
• /
• pp.427-438
• /
• 1994

This experimental study was earned out to examine the heat transfer characteristics of a 2-dimensional impinging air jet on a flat plate with a set of square rods. The objectives of the study were to investigate the flow and heat transfer characteristics caused by the square rods and to find out the optimum rods arrangement. Experiment was carried out first without using the rods to establish the baseline heat transfer performance. Then, rods of different widths and clearances were installed to cause the turbulence on the fluid flow.

• Journal of the KSME
• /
• v.33 no.12
• /
• pp.1063-1068
• /
• 1993

왕복식엔진에서 연소과정은 실린더내 유체유동에 지배되므로 최적조건의 엔진설계를 위해서는 실린더내 유체유동을 효과적으로 이용하는 것이 필요하다. 연소과정에 중요한 영향을 미치는 압축말기 연소실내 난류강도는 흡입과정시 생성된 유동의 에너지가 압축과정을 거치면서 작은 스케일의 에디(eddy)로 깨지면서 발생된다. 연소과정시 이러한 에디들은 초기화염생성을 촉진 시키고 화염전파속도를 증진시키는 역할을 함으로써 실린더내 유체유동에 대한 이해증진을위해 실린더내 평균속도 및 난류유동을 측정하는 연구들이 많이 진행되고 있다. 엔진유동은 매사이 클의 유동이 엄밀히 주기적인 운동을 하지 않고, 각 사이클의 유동이 비정상유동을 하며, 유동의 생성 및 소멸이 매우 짧은 특성을 가진다. 따라서 산란입자가 측정체적을 통과할 때 속도데이 터가 발생하는 LDV(laser Doppler velocimetry) 측정에 있어서 레이저빔의 산란광노이즈 감소와 산란입자의 효율적인 공급으로 데이터 발생률을 높이는 것이 어려운 점이다. 이 글에서는 엔진 유동의 LDV측정시 고려해야 할 문제점들, 실험장치구성, 그리고 데이터처리 방법과 주요측정 결과에 대해 본 연구팀에서 지금까지 수행한 연구결과를 토대로 하여 기술하고자 한다.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2001.10a
• /
• pp.75-76
• /
• 2001

산업적으로 강제 Swirl 유동은 난류를 촉진하기 위하여 많이 이용된다. 특히 Swirl유동은 난류 강도를 증가시켜 물질과 열의 전달 효과를 증진시켜 터빈 연소기, 열교환기 및 각종 산업용 버너 등의 공업분야에 폭넓게 이용되고 있다. Swirl강제 유동 발생 방법은 원추형 덕트방식, 베인형, 프로펠러형 등이 많이 이용되고 있으나 대부분의 방법은 강제로 와류(Swirl)를 발생, 촉진 및 증가 시키므로 유동손실 및 압력 손실 등을 수반하게 되어 많은 에너지 손실을 가져온다. (중략)

• Solar Energy
• /
• v.13 no.1
• /
• pp.22-30
• /
• 1993

This Paper deals with the experimental study of the axisymmetric air jet impinging vertically on the flat heating surface with and without swirl. The purpose of this study is to investigate the characteristics of flow, augmentation of heat transfer rate, turbulent intensity, and the comparison of heat transfer rate, the optimal swirling condition about the swirl and nonswirl axisymmetric air jet. In order to augment the heat transfer on the flat heating surface without introducing any additional power, the technique used in the present work was placement of twisted tape inserted pipe in front of the nozzle exit in order to make a swirl. The effect of swirl degree is investigated in case of S=0., 0.056, 0.111, 0.222 and the velocity of the jet was 14, 20, 26, 32, 38, 44m/s. The distance between the nozle exit and the stagnation point on the impinging plate was the H/D=$1{\sim}14$. In order to analyze of the flow structure which increase heat transfer, the velocity and the turbulent intensity of the axisymmetric jet was measured by a hot wire anemometer according to the swirl number and H/D.

• Journal of Energy Engineering
• /
• v.21 no.2
• /
• pp.187-193
• /
• 2012

In this study, it was experimentally investigated the effect of the clearances distance between the rod and the impinging plate on characteristics of the thermal flow. For the heat transfer enhancement of wall jet region, the right triangle and the square rods were arranged in front of the impinging plate with various clearance distances. As results, the heat transfer enhancement rate of potential core region at H/B=2 was higher than that of transition region at H/B=10. In this experiment range, the maximum heat transfer enhancement rate was about 46 % higher at the square rod with H/B=2 and C=1mm compared with the flat plate. The heat transfer enhancement rate of the right triangle rod was on average about 3 to 8 % higher than that of the square rod, regardless of the clearance.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.7
• /
• pp.944-951
• /
• 2001

The purpose of this study is to investigate the effect of shear on turbulent diffusion. Turbulent Couette flows at low Reynolds number are numerically simulated using a Lagrangian PDF method. Flow field and particle trajectories are computed and analyzed in detail. Statistics for particle dispersion obtained from numerical simulations is compared with the classical scaling relations for dispersion in a shear flow.