• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2007.12a
• /
• pp.138-140
• /
• 2007

폰툰형 레저보트는 쌍동식 또는 삼동선식의 안전성이 확보된 선체와, 다양한 기능을 만족할 수 있는 상부구조로 구성, 건조비 뿐만 아니라 레저 접근성이 용이한 보트로서, 해양레저 선진국에서는 내수면뿐만 아니라 해수면에서도 함께 즐길 수 있는 가족형 레저보트로 인식되어 최근 보급이 확대되고 있는 추세이다. 그러나 폰툰형 레저보트는 최적의 공간활용을 위해 사각모양의 갑판형태로 인해 유체의 저항에 취약한 단점이 있다. 이로 인해 선저형상, 추진시스템 및 조향운전장치 뿐만아니라 선수선저부의 슬래밍 충격에 대비한 구조강도 등 체계적인 연구를 통한 개발이 필요하다. 이에 본 연구에서는 2가구 4인 가족단위로 함께 즐길 수 있는 안전성이 높고, 낚시, 스쿠버 둥을 위한 편의시설이 확보한 선형 최적형상 연구 및 구조강조 해석을 통한 9인승 규모의 폰툰형 레저보트를 개발하고자 한다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.8
• /
• pp.911-916
• /
• 2014

The leisure boat industry has the potential to become a high-value-added industry in the future. Recently, a study on Korean high-speed leisure boats for fishing was conducted. This study suggests a product configuration model-based shipbuilding cost estimation method for determining the type of leisure boat suitable for mass production, as part of a research for productivity improvement. The suggested estimation method based on the analysis of the leisure boat process and generic YWBS can calculate quantitative and concrete data. By using this method, the cost of building the catamaran-type design ship can be reduced by 17 times, compared to that of the monohull-type mother ship. This implies that the final design of the Korean high-speed leisure boat for fishing will have a competitive price at the actual production stage.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.10-11
• /
• 2013

최근 여가 관광의 기능이 활성화되고 해양활동에 대한 관심이 증가하면서 주로 어업의 대상으로 여겨지던 해양공간이 관광자원으로서의 중요성이 부각되고 있으며, 여가활동 및 가족단위 관광활동의 증가로 인하여 해양환광활동에 대한 국민적 관심이 높아지면서 해양레저에 대한 수요가 증가하고 있다. 하지만 우리나라 해양레저활동의 현실은 시설 및 프로그램이 활성화되지 못하고 있으며, 기존의 낚시나 유선사업의 수준을 벗어나지 못하고 있다. 현재 해양레저활동자 조차도 바다에 관한 깊은 이해와 일정수준의 기술 및 노하우를 가지지 못한 상황이며, 레저보트가 접근할 수 있는 지역의 정보 부족으로 근거리의 단순한 경로만을 반복적으로 운항하고 있는 실정이다. 따라서 본 연구에서는 이러한 문제점을 개선하고 요트항해에 필요한 다양한 정보의 제공에 대응하여 해양레저활동을 위한 레저항로를 부산지역을 중심으로 제안하였다.

• Journal of Ocean Engineering and Technology
• /
• v.27 no.6
• /
• pp.1-6
• /
• 2013

A 25ft class fishing leisure boat is developed, and the resistance performances are investigated by a model test in a high-speed circulating water channel. The design speed of the developed ship is 25 knots using a 150 ps outboard engine. A catamanan type hull form using a planing section is adopted considering the Froude number and large deck area. The effect of a center body attached on the bottom of the cross deck is studied under various conditions. Wave patterns are observed to make clear the relationship between the resistance performance and the wave characteristics. The results show that the shape of the center body and the position of the chine line can have a strong effect on the resistance performance in a certain velocity range.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2017.11a
• /
• pp.143-144
• /
• 2017

에어보트(Air boat)는, 판옥선처럼 선체 밑바닥이 편평한 형태로 되어있어 물위는 물론 일반 선박이 갈 수 없는 얕은 수면, 늪지수풀 위를 달릴 수 있는 모터보트의 한 종류로서, 팬 보트(Fan boat) 혹은 덕 보트(Duck boat)라고 불리기도 한다. 선체상부 뒤쪽에 장착된 로터의 회전에 의한 풍력으로 추진되며, 로터 바로 뒤에 방향키가 있다. 선체 재질로는 스틸, FRP 등이 사용되고 있으나 최근 고부가선박을 대상으로 알루미늄, 탄소섬유 사용이 늘어나고 있다. 주로 수상 크루징, 낚시, 스쿠버 등에 활용되며, 특히 선저의 독특한 형상으로 인해 군사용, 인명구조용, 수산물수송용 등 특수 목적으로도 사용된다. 이 연구에서는 에어보트 국산화 개발을 위해 주요 개발항목을 도출하고, 12인승 보트를 제조하고자 한다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2014.01a
• /
• pp.29-30
• /
• 2014

최근 해양 분야에서는 레저보트, 윈드서핑, 낚시 해상관광 등 해상에서 활동이 증가됨에 따라 선박의 안전을 비롯하여 해상 활동을 위한 다양한 정보 제공 요구가 점차 늘어가고 있다. 해상활동을 위한 정보제공은 사용자의 위치를 기반으로 사용자에게 적합한 정보의 제공이 필요하다. 특히, 전자해도 상에 사용자의 위치 또는 사용자가 지정한 위치를 기반으로 정보를 제공하는 위치 기반 정보 서비스의 제공 요구가 늘어나고 있다. 본 논문에서는 사용자의 위치 또는 사용자가 설정한 위치를 중심으로 전자해도 상에 정보를 표시하여 제공하는 정보시스템 모델을 제시한다. 본 논문에서 제시하는 시스템은 사용자 디바이스로부터 획득한 위치정보 또는 사용자가 전자해도 상에 지정한 위치를 바탕으로 항로표지 정보, 일출, 일몰, 간조, 만조, 날씨 등을 표시하여 제공한다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.7
• /
• pp.945-952
• /
• 2018

Recently, bass fishing has become a marine leisure sport in Korea. There are 4 major fishing associations in Korea, and each association holds 10-15 tournaments each year. However, supply of 17 ft bass boats, which are preferred in leagues, depends 100 % on imports. In this study, we have derived the main specifications to develop the initial hull forms of a 18.5ft bass boat through statistical analysis based on mothership data. In addition, CFD numerical analysis was carried out according to deadrise angle and longitudinal center of gravity, which strongly influenced the resistance and planing performance. For numerical analysis, design speed was set to $Fn=3.284 (Re=9.858{\times}10^7)$, the deadrise angle was set from 12 to $20^{\circ}$, and the longitudinal center of gravity was set in the range of 0 to $8%L_{wL}$ from the center of buoyancy to the stern. Based on the numerical results, we first set the range of these factors by resistance performance and immersion keel length. Furthermore, using a correlation graph of Savitsky's Drag-Lift ratio, we derived the deadrise angle ($14-16^{\circ}$) and longitudinal center of gravity ($4-6%L_{wL}$).

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.06a
• /
• pp.225-226
• /
• 2012

Recently, In the domestic is used mainly fiberglass reinforced plastic(GRP) and is built for maritime leisure vessel & structures. but it less attention is insufficient for ship of structural strength assessment of maritime leisure vessel. Therefore, The structural strength evaluation suitable for the domestic situation formulate and is applied to domestic regulations of "Guidance for Recreational Crafts" of Korea register of shipping(KR) & "Reinforced plastic line structure standards" of Ministry of Land, Transport and Maritime Affairs. the structural design and finite element analysis(FEA) to ensure the reliability.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.29 no.1
• /
• pp.105-120
• /
• 2011

A moat is a pond or waterway paved on the outside of a fortress that is one of the facilities to prevent enemy from approaching the fortress wall or classify it as the boundary space, moats had existed in Europe, Asia and the America from ancient times to medieval times. however it is has been disappeared in modem society. In addition, a moat is a great value in historical and cultural sense such as offering a variety of cultural activities and habitats for animals, but unfortunately there is little consideration of its restoration plan. This research is aimed to investigate historical and cultural meaning and significance of moats which had been existing from ancient times to medieval times in the Eastern and Western. For this purpose, this research analyzed concepts and functions in consideration with times and ideological backgrounds of moats in Korea, China, and Japan. Results were as follows: 1. Moats in Korea existed not only in the castle towns of Goguryeo but also in ancient castle towns of Baekje and Silla. Natural moats and artificial moats existed around castles that were built to prevent and disconnect accessibility of enemies In Goryeo Dynasty and Chosun Dynasty, moats were also used as a defensive function. 2. A moat was generally installed by digging in the ground deep and wide at regular intervals from the ramparts, A moat was installed not only around a castle but also in its interiors. Moats outside castles played an important role in stomping the ground hard besides enhancing its defensive power. In addition, water bodies around a facility often discouraged people's access and walls or fences segregated space physically, but a moat with its open space had an alert and defensive means while pertaining its visual characteristics. 3. The moat found at Nagan Eupseong rumor has it that a village officials' strength was extremely tough due to strong energy of the blue dragon[Dongcheon] in Pungsujiri aspects, so such worries could be eliminated by letting the stream of the blue dragon flow in the form of 'S'. 4. The rampart of the Forbidden City of China is 7.9 meters high, and 3,428 meters long in circumference. It was built with 15 layers of bricks which were tamped down after being mixed with glutinous rice and earth, so it is really solid. The moat of the Forbidden City is 52 meters in width and 6 meters in depth, which surrounds the rampart of the Forbidden City, possibly blocking off enemies' approach. 5. Japan moats functioned as waterways due to their location in cities, further, with the arrangement of leisure facilities nearby, such as boating, fishing from boats, and restaurants, it helped relieve city dwellers' stress and functions as a lively city space. 6. Korean moats are smaller in scale than those of the Forbidden City of China, and Edo, and Osaka castles in Japan, Moats were mostly installed to protect royal palaces or castles in the Eastern Asia whereas moats were installed to protect kings, lords, or properties of wealthy people in the west.