• Title/Summary/Keyword: 낙하석

Search Result 49, Processing Time 0.029 seconds

Blast Design for Controlled Augmentation of Muck Pile Throw and Drop (발파석의 비산과 낙하를 조절하기 위한 발파 설계)

  • Rai, Piyush;Yang, Hyung-Sik
    • Tunnel and Underground Space
    • /
    • v.20 no.5
    • /
    • pp.360-368
    • /
    • 2010
  • The paper presents a case study from a surface mine where the controlled augmentation of throw and drop of the blasted muck piles was warranted to spread the muck piles on the lower berm of the bench. While the augmentation of throw increased the lateral spread and the looseness of the broken muck, the augmentation of drop significantly lowered the muck pile height for easy excavation by the excavators. In this light, the present paper highlights and discusses some pertinent changes in the blast design parameters for such specialized application of cast blasting in a surface mine, where a sandstone bench, with average height of 22-24 m was to be made amenable for excavation by 10 m3 rope shovels, which possessed maximum digging capability of up to 14 m. The results of tailoring the blast design parameters for augmentation of throw and drop are compared with the baseline blasts which were earlier practiced on the same bench by dividing the full height of the bench in 2-slices; upper slice (10-14 m high) and lower slice (12-15 m high). Results of fragment size, its distribution and total cycle time of excavator (shovel) are presented, and discussed.

Impact Analysis of Printed Circuit Boards Using Finite Element Method (FEM을 활용한 회로기판의 충격 해석)

  • 박철희;이우식;홍성철;박용석;서정범
    • Proceedings of the Korean Society for Noise and Vibration Engineering Conference
    • /
    • 1992.10a
    • /
    • pp.141-146
    • /
    • 1992
  • 본 연구에서는 먼저 낙하 충격을 받는 전자 제품을 수학적인 모델링을 행하 므로서 낙하 충격시 제품이 받게되는 충격력을 정량화하였고, 전자 제품내 많은 부품들의 낙하충격에 대한 동특성해석의 일환으로 핵심 부품인 PCB(printed circuit board)를 해석하였다. PCB 해석을 위하여 유한요소법을 사용하였고, PCB에 작용하는 half-sine pulse의 속도 변화에 다른 가속도 응 답 및 최대 충격가속도, 주기의 변화에 다른 PCB의 가속도 응답을 해석하였 다. 제시된 해석 기법은 낙하충격에 대비한 적절한 electric component의 layout및 최적의 PCB 취부조건등의 결정을 가능케 함으로써, 설계단계에서 낙하 충격을 고려한 PCB설계가 될 수 있도록 그 활용 방안을 제시하였고 반복된 낙하충격 실험을 줄일 수 있으므로 경비 절감 및 개발 소요기간도 절감할 수 있다.

  • PDF

Jurassic (~170Ma) Zircon U-Pb Age of a "Granite Boulder" in the Geumgang Limestone, Ogcheon Metamorphic Belt, Korea: Reinterpretation of its Origin (옥천변성대 금강석회암 내 "화강암 거력"의 쥬라기(~170 Ma) 저어콘 연대: 성인에 대한 재해석)

  • Cheong, Wonseok;Cho, Moonsup;Yi, Keewook;Lee, Min Sung;Kim, Yoonsup
    • The Journal of the Petrological Society of Korea
    • /
    • v.25 no.1
    • /
    • pp.29-37
    • /
    • 2016
  • A "granite boulder", ~70 cm in size, was reported from the Geumgang Limestone, and has been considered as a glaciogenic dropstone. Since this interpretation has enormous implications for unraveling the evolution history of the Ogcheon Metamorphic Belt, we re-examined the contact relationship and structure of the "granite boulder", and estimated its emplacement age based upon SHRIMP U-Pb zircon dating. The weighted mean $^{206}Pb/^{238}U$ age pooled from 6 spot analyses of two specimens is $170{\pm}2Ma$ ($2{\sigma}$, MSWD=2.2). This zircon age suggests that the "granite boulder" in the Geumgang Limestone is a part of Jurassic granite, rather than a glaciogenic dropstone.

A mite Element Modeling for the Puncture Drop Test of a Cask with the Failure of Impact Limiter (충격완충체의 효과를 고려할 수 있는 운반용기의 파열낙하시험 유한요소해석 방법)

  • Kwon, Kie-Chan;Seo, Ki-Seog;You, Gil-Sung
    • Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
    • /
    • v.7 no.1
    • /
    • pp.9-16
    • /
    • 2009
  • Transport package for radioactive material should be structurally safe under puncture drop condition and its safety should be verified by test and numerical analysis. Most finite element analyses for puncture drop have been performed without modeling the impact limiter since failure is occurred in the materials of the impact limiter. This paper presents a new modeling methodology, where an element is eroded in case that the material's failure criteria are reached at the element's integration point, to investigate the effect of the impact limiter in the puncture process. The effectiveness of the proposed scheme is shown through the puncture drop analysis of hotcell transport cask, which is under design in KAERI. The results show that about 80 percent of the total impact energy is absorbed due to the deformation of impact limiter. Using the present method the puncture drop can be analyzed more accurately, but it would give conservative results compared to the actual test condition.

  • PDF

A Preliminary Drop Test of a Type IP-2 Transport Package with a Bolted Lid Type (볼트체결방식의 IP-2형 운반용기의 낙하예비시험)

  • Kim Dong-Hak;Seo Ki-seog;Park Hong Yun;Lee Kyung Ho;Yoon Jeong-Hyoun;Lee Heung-Young
    • Proceedings of the Korean Radioactive Waste Society Conference
    • /
    • 2005.11a
    • /
    • pp.339-347
    • /
    • 2005
  • A type IP-2 transport package should prevent a loss or dispersal of the radioactive contents and a more than $20\%$ increase in the maximum radiation level at any external surface of the package when it were subjected to the drop test under the normal conditions of transport. If a shielding thickness of IP-2 transport package is thick, a bolted lid type may prevent a loss or dispersal of the radioactive contents than the door type of ISO containers which are generally used as a type IP-2 transport package. In this paper, to evaluate the effect of drop directions on the bolt tension and the coherence of a bolt, the drop tests of preliminary small model are tested and evaluated for seven directions before the drop test of a type IP-2 transport package with a bolted lid type under the normal conditions of transport. Seven drop directions which are a bottom-vertical drop, a lid-vortical drop. a horizontal drop and four corner drops have been carried out. Using a force sensor, the bolt tension during the drop impact is measured. The coherence of bolt is evaluated by the difference between the fastening torque of bolt before a drop test and the unfastening torque of bolt after a drop impact.

  • PDF

사용후연료 저장용기 캐니스터의 낙하평가

  • 서기석;신동필;박성원;정성환;이흥영
    • Proceedings of the Korean Radioactive Waste Society Conference
    • /
    • 2004.06a
    • /
    • pp.350-350
    • /
    • 2004
  • 국내 사용후연료는 중간저장시설 확보가 지연됨에 따라 점차 각 발전소의 사용후연료 저장조가 포화상태에 이르고 있다. 국가정책에 따른 사용후연료 중간저장시설의 운영이 시작되는 시점까지 발전소에서 사용후연료 저장용기가 하나의 대안으로 고려될 수 있다. 경수로 사용후연료의 저장용기의 구조설계는 취급사고의 한 형태로서 낙하조건에 대한 안전성을 요구하고 있다. 경수로 사용후연료 24 다발을 적재하는 캐니스터는 콘크리트 외부용기(overpack)의 상부로부터 하향 방향으로 삽입된다.(중략)

  • PDF

경사낙하 충돌조건하의 사용후핵연료 수송용기의 충돌거동

  • 구정회;서기석;정성환;도재범;김영진
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 1995.05a
    • /
    • pp.885-890
    • /
    • 1995
  • 사용후핵연료 수송용기는 충돌사고에 대한 구조적 건전성을 입증하기 위하여 9 m 자유낙하조건에 대하여 수송용기의 충돌거동을 평가해야 한다. 본 연구의 목적은 수송용기가 9 m 높이에서 충돌면과 경사각을 갖고 충돌할 때의 동적거동을 파악하기 위한 것이다. 수송용기가 충돌과 함께 회전하며 연속충돌을 일으키는 45$^{\circ}$ 이하의 작은 경사각을 갖고 충돌할 매 수송용기에 발생하는 응력, 가속도, 충돌력 등을 분석하여 동적거동을 파악하였다. 또한, 수송용기의 경사각도를 변화시키며, 경사각도의 변화가 수송용기의 동적 거동에 미치는 영향을 파악하였다.

  • PDF