• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.961-967
• /
• 2007

Automatic water feeding system for chickens is the one of the most important devices at poultry farms. Chickens drink water directly from a water feeder nipple of the automatic water feeder. Check valve inside the water feeder nipple is open when they drink water and is closed otherwise. There are two types of nipples. One is the piston nipple, and the other is the ball nipple. Because the nipple stick in the ball nipple can move freely, the sloping mechanism of the ball nipple works well. but it has complicated mechanism. On the other hand, the piston nipple has very simple structure, but its movement is limited so it can move only up-and-down. To overcome those limitation, the piston nipple with sphere valve seat face (sphere face piston nipple) has been developed and is just distributed at domestic markets. The experimental performance test of the commercialized sphere piston nipple has been conducted, and compared with the performance of the ball nipple and the piston nipple which are domestic products. As the result, sphere piston nipple shows excellent performance compared to that of the piston nipple but its performance is similar to ball type nipple.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.1
• /
• pp.67-75
• /
• 2013

The flow stress of zircaloy-4 used in the spacer grid supporting a nuclear fuel rod was determined by the Johnson-Cook model, and model parameters were determined using reverse engineering. Parameters such as A, B, n and $\dot{\varepsilon}_0$ were determined by the tensile test result. To obtain the parameters C and m, a slot milling test and numerical simulation were performed. The objective functions were defined as the difference between the experimental and the simulation results, and then, the parameters were determined by minimizing the objective function. To verify the validity of the determined parameters, cross-verification for each case was conducted through a shearing test and simulation. The results tend to show agreement with the experimental results, such as the features of sheared edges and maximum punch force, with the correlation coefficients exceeding at least 0.97.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.2587-2593
• /
• 2014

Ceramic Injection Molding (CIM) is one of wide used processes in industry field and the applications are gradually being expanded to parts of medical and electric devices. In this study, the CIM process were analyzed with FEM and process parameters were studied and analyzed the effect on product quality. The shape of simple flat plate was compared to the shapes with the hole, with the round corner portion or with the side wall portion. If there are holes then the hole around the uneven density distribution and the defects such as weld lines could be occurred. The Large radius of the corners of the product give good formability and fluidity. Not only the shape parameters of product but also the process parameters during CIM are studied. The simulation results showed that the process parameters of temperature, initial fractions and velocity are important design parameters to improve the quality of products.

• Journal of Korea Foundry Society
• /
• v.42 no.4
• /
• pp.209-217
• /
• 2022

In the present study, in order to prevent the misrun defects that occur during traditional brass casting, a method for selecting the proper casting process conditions is proposed. A learning model was developed and demonstrated to be able to learn the presence or absence of defects according to the casting process conditions and to predict the occurrence of defects depending on the certain process given. Appropriate process conditions were determined by applying the proposed method, and the determined conditions were verified through a comparison of different simulation results with additional conditions. With this method, it is possible to determine the casting process conditions that will prevent defects in the desired sand model. This technology is expected to contribute to realization of smart traditional brass farming workshops.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.281-281
• /
• 2023

최근 급격한 기후변화와 하천수 사용량의 증가로 수문학적 변동성이 증가하면서 지표수와 지하수의 통합 관리 필요성이 증대되고 있다. 이에 따라 SWAT-MODFLOW 모델은 지표수와 지하수 간의 수문학적 상호작용을 고려한 시공간적 지하수함양량의 분포와 하천과 대수층 간의 물 교환량, 장기 유출 및 수질 거동 해석 등에 널리 사용되고 있다. 그러나 이 모델은 국내 농업 유역 내 담수 논에서의 영농활동을 고려한 시단위 유출 및 수질 예측과 지표수-지하수 통합 해석에 어려움이 있다. 우리나라의 경우 전국 농지 면적 중 논이 약 50%를 차지하고 있음에도 불구하고 아직까지 국내 담수 논 특성을 고려하여 지표수-지하수 통합 해석이 가능한 수문 모델이 개발 된 바 없다. 이에 본 연구에서는 고해상도 시강우량에 따른 담수 논에서의 증발, 침투, 관개, 배수 등 모의가 가능한 Hourly SWAT-PADDY 모듈을 개발하고, SWAT-MODFLOW 모델의 수문 프로세스와의 연계를 통해 지표수-지하수 통합 해석이 가능한 Hourly SWAT-MODFLOW-PADDY 모델을 개발하였다. Hourly SWAT-MODFLOW-PADDY 모델은 사용자가 구축한 담수 논의 입력자료(담수, 관개, 낙수 일정 등)를 기준으로 논의 담수 및 비담수 시기에 따른 시단위 물수지 해석과 이를 고려한 유출량, 수질, 지하수함양량, 하천과 대수층 간의 물 교환량 산정이 가능하다. 본 연구에서 개발 된 Hourly SWAT-MODFLOW-PADDY 모델은 국내 농업 유역에서의 지표수-지하수 통합 관리 대책 수립 방향을 제시하기 위한 도구로 활용될 수 있을 것이다. 또한, 향후 논의 관개 용수 공급원 연계를 통한 모델의 고도화 방안과 최적의 논 영농 데이터베이스가 마련된다면 보다 정량적인 물수지 해석 기반의 지표수-지하수 통합 모델링이 가능할 것으로 보인다.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.3
• /
• pp.150-156
• /
• 2005

The increasing emission of greenhouse gases may change agricultural environment. The agronomic productivity will depend upon change of temperature, precipitation, solar radiation and fertilization. This study was conducted to investigate greenhouse gas emission with irrigation water depth in paddy field. Area of each experiment plot is $70m^2$, Three treatments with three replications were carried out in this experiment, which was laid out as randomized complete block design. The treatments of irrigation water were maximum field water capacity and 4 and 8 cm depth. The application rate of fresh rice straw was $8,000kg\;ha^{-1}$ in combination with chemical fertilizers ($110kg\;N\;ha^{-1}$, $45kg\;P_2O_5\;ha^{-1}$ and $57kg\;K_2O\;ha^{-1}$). The $CH_4$ emission was highest at 32 days after rice transplanting with rice straw treatment. The $CH_4$ emission in the plot of maximum field water capacity was lower compared with 4 and 8 cm of irrigation depth. $CH_4$ and $N_2O$ emission under different water depth in the paddy field were 30 and $1.52kg\;ha^{-1}$ at 8 cm depth, 281 and $1.71kg\;ha^{-1}$ at 4 cm depth, and 219 and $2.01kg\;ha^{-1}$ at water saturated condition. The total emission of greenhouse gases equivalent to $CO_2$ emission with rice straw application were $6,939kg\;CO_2\;ha^{-1}$ at 8 cm depth plot, $6,431kg\;CO_2\;ha^{-1}$ at 4 cm depth plot and $5,222kg\;CO_2\;ha^{-1}$ at water saturated condition. The GWPs without rice straw application were $4,449kg\;CO_2\;ha^{-1}$ at 8 cm depth plot, $3,702kg\;CO_2\;ha^{-1}$ at 4 cm depth plot and $4,579kg\;CO_2\;ha^{-1}$ at water saturated condition.

• Korean Journal of Environmental Agriculture
• /
• v.31 no.4
• /
• pp.318-327
• /
• 2012

BACKGROUND: For Non-Point Source(NPS) loads reduction, pollutant loads need to be quantified for major farming methods. The objective of this study was to evaluate impacts of farming methods on NPS pollutant loads from a paddy rice field during the growing season. METHODS AND RESULTS: The height of drainage outlet, amount of fertilizer, irrigation water quality were considered as farming factors for scenarios development. The control was derived from conventional farming methods and four different scenarios were developed based combination of farming factors. A field scale model, CREAMS-PADDY(Chemicals, Runoff, and Erosion from Agricultural Management Systems for PADDY), was used to calculate pollutant nutrient loads. The data collected from an experimental plot located downstream of the Idong reservoir were used for model calibration and validation. The simulation results agreed well with observed values during the calibration and validation periods. The calibrated model was used to evaluate farming scenarios in terms of NPS loads. Pollutant loads for T-N, T-P were reduced by 5~62%, 8~37% with increasing the height of drainage outlet from 100 mm of 100 mm, respectively. When amount of fertilizer was changed from standard to conventional, T-N, T-P pollutant loads were reduced by 0~22%, 0~24%. Irrigation water quality below water criteria IV of reservoir increased T-N of 9~65%, T-P of 9~47% in comparison with conventional. CONCLUSION(S): The results indicated that applying increased the height of drainage after midsummer drainage, standard fertilization level during non-rainy seasons, irrigation water quality below water criteria IV of reservoir were effective farming methods to reduce NPS pollutant loads from paddy in Korea.

• Physical Therapy Korea
• /
• v.6 no.2
• /
• pp.56-66
• /
• 1999

The purpose of this study focused how to show physiological responses comparing exercise group and non exercise group for progressive maximal wheelchair ergometer exercise loading in complete paraplegia. It also examined the various factors which would be influenced physiological responses. Sixteen subjects have been investigated in this study, and the subjects are divided into two groups as follows: 1) exercise group (7 subjects) 2) non exercise group (9 subjects). Each test was terminated by physical exhaustion and/or an inability to maintain a flywheel velocity. The results were as follows: 1) No difference was noted in pulmonary function test between two groups. 2) $\dot{v}$ Emax value during maximal exercise was significantly different between the groups (p<0.05). The mean $\dot{v}$ Emax of exercise group was $69.67{\ell}/min$, non exercise group was $41.47{\ell}/min$. 3) $\dot{v}$ $O_2max$(${\ell}/min$) value during maximal exercise was significantly different between the groups (p<0.05). The mean $\dot{v}$ $O_2max$(${\ell}/min$) of exercise group was $1.72{\ell}/min$, non exercise group was $1.15{\ell}/min$. 4) $\dot{v}$ $O_2$ max(ml/kg/min) value during maximal exercise was significantly different between the groups (p<0.05). The mean $\dot{v}$ $O_2max$($ml/kg{\cdot}min$) of exercise group was $25.99ml/kg{\cdot}min$, non exercise group was $18.61{\ell}/min$. 5) Maximal heart rate(HRmax) value during maximal exercise was significantly different between the groups (p<0.05). The mean HRmax of exercise group was 180.43 beats/min, non exercise group was 175.00 beats/min. 6) $\dot{v}\;E/\dot{v}\;O_2$ value during maximal exercise was not significantly different between the groups (p>0.05). The mean $\dot{v}\;E/\dot{v}\;O_2$ of exercise group was $36.36{\ell}/{\ell}\;O_2$, non exercise group was $45.46{\ell}/{\ell}\;O_2$. Considering the results which explore the exercise group with paraplegia has shown the maximal aerobic power compared with non exercise group, regular and consistent physical training is highly assumed as a main factor to improve cardiopulmonary fitness.

• The Journal of the Korea Contents Association
• /
• v.13 no.8
• /
• pp.128-140
• /
• 2013

The cause of traffic accidents and driver behavior is affected by psychological factors, because the behavior of drivers and pedestrians, and to identify the psychological linkage analysis to explore improvements in service design approaches are becoming increasingly important. Service design is a service-oriented development methodology that make invisible and intangible elements into visible and higher-value. Accordingly, through design thinking to action for development of products and a pleasant road environment were studied for school zone by discovering underlying issues to resolve in terms of service design. First, survey of domestic road psychological and behavioral problems were derived through the analysis of the causes of traffic accidents and researched the concept of school zones by analyzing the ideas. To reduced the width of the lane manipulate the speed of the vehicle and to cross the crosswalk safely. In order to encourage the flow of vehicle traffic, new solutions are proposed by offering robot traffic lights, graphic design of crosswalk, space, and the fence and convergence public design and services.

• Korean journal of applied entomology
• /
• v.4
• /
• pp.33-38
• /
• 1965

1. This survey was conducted to make a basis for the cause of severe epidemic and disease control to the losses due to bacterial leaf blight of rice in Chun-Nam rice paddy field areas in the first part of October in 1965. The severe epidemic areas were included Taijun-Myun, Tamyang-Eup, riverside in Youngsanpo and seaside in the suburbs of Mokpo. 2. A drought in the period of rice transplanting and flooding due to a heavy rain in July were resulted reasonable weather conditions that the disease occurred more early and severe epidemic. 3. In Tamyang area, frist outbreak of the disease was on the middle part of July in the paddy flooded after heavy rainfall of the first fart of July. It is recognized to farmers that the disease is known as a now serious one. 4. The more date of transplanting is followed, the more serious damage is happened and especially, in the paddy field flooded, too. 5. Flooded areas showed more serious epidemic. 6. Varietal difference to the disease was surely noticed, and Kumnampoong and Chunbonwuk were susceptible, whereas Norin 6 was resistant. 7. Damage was occurred more in plant paddy area than tile slopping paddy area. 8. Fallow paddy field was more serious than the field using double cropping a year. 9. Moist and semimoist paddy field were more serious damage, while light damage in dry paddy field. 10. Near part of flood gate for drainage of submerge paddy was more serious damage than inside part of the field. 11. Soft type is often seen in the mode of the disease occurrences. 12. The most farmers insisted that dropping water is caused to promote disease dissemination when disease occurred.