• The Science & Technology
• /
• s.501
• /
• pp.46-49
• /
• 2011

나프타분해기술이란 석유화학산업의 기초 원료인 경질올레핀(에틸렌, 프로필렌)을 생산하기 위한 기술로서 철강산업에서 제철산업이 하는 역할을 화학산업에서 한다고 볼 수 있다. 즉, 각종 합성수지 및 화학제품을 생산하기 위한 기초화학원료를 만드는 기술이다.

• Clean Technology
• /
• v.29 no.4
• /
• pp.262-271
• /
• 2023

Globally, the amount of waste plastics has been occurring to environmental problems. As a result, it is necessary to research methods that utilize waste plastic pyrolysis oil (WPPO) produced by pyrolysis. One such method being studied is utilizing WPPO as a naphtha feedstock. In this study, five types of WPPO were analyzed to determine whether they can be used as raw materials for naphtha. Because of their wide boiling point range, the WPPOs were fractionated into light and heavy fractions through vacuum distillation, and the separation and purification techniques were analyzed using GC-VUV to determine the content of paraffin, olefin, and other compounds. All WPPOs showed high olefin content regardless of the source and fraction. Aromatic and paraffin content varied depending on the source, and oxygen and other compounds also varied significantly by source and fraction. In addition, the light fraction showed a carbon distribution similar to that of naphtha, whereas the heavy fraction showed a carbon distribution of C₁₁ ~ C₁₄. In conclusion, additional processes and raw material selection are required to utilize waste plastic pyrolysis oil as a raw material for naphtha.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.21-27
• /
• 2018

FRN (Full range Naphtha) is distilled from crude oil in a Naphtha Splitter Unit and is separated into the Light Straight Naphtha, Heavy Naphtha, and kerosene according to the boiling point in sequence. This separation is conducted using a series of binary-like columns. In this separation method, the energy consumed in the reboiler is used to separate the heaviest components and most of this energy is discarded as vapor condensation in the overhead cooler. In this study, the first two columns of the separation process are replaced with the Petlyuk column. A structural design was exercised by a stage to stage computation with an ideal tray efficiency in the equilibrium condition. Compared to the performance of a conventional system of 3-column model, the design outcome indicates that the procedure is simple and efficient because the composition of the liquid component in the column tray was designed to be similar to the equilibrium distillation curve. An analysis of the performance of the new process indicated an energy saving of 12.3% under same total number of trays and with a saving of the initial investment cost.

• Journal of Welding and Joining
• /
• v.1 no.2
• /
• pp.7-11
• /
• 1983

본 공장(진해화학주식회사)에서 암모니아는 나프타를 원료로 한 수소와 공기 중의 질소를 합성하여 제조된다. 암모니아 제조 공정 중 메탄가스(CH$_{4}$)와 수소가스(H$_{2}$) 중에 불순물로 존재하는 유화 수소(H$_{2}$S)를 제거시키는 공정이 탈황공정이다. 탈황공정은 산화 아연(ZnO)과 코발트-몰리브덴(Cobalt-Molybdenum) 촉매층에서 이루어지며 탈황공정이 이루어지는 용기를 탈황조(desulfurizer vessel)라 한다. 본 공장에 설치된 탈황조는 1966년에 설치되어 운용되어 왔다. 본 공장의 안전 조업을 위해 초음파 탐상법, 방사선 투과 탐상법, 표면 침투 탐상법으로써 탈황조의 노후도 측정을 행하였다. 탐상 결과 스테인레스 클래드의 모재부 용접선을 따라 균열이 발견되었다. 균열 부위를 깊이 연마하여 용접 결함부를 제거하고 다시 용접을 함으로써 본 탈황조를 연장하여 사용할 수 있었다.

• Korean Chemical Engineering Research
• /
• v.47 no.1
• /
• pp.127-132
• /
• 2009

This report examines the economic feasibility of a commercial 50,000 barrel per day direct coal liquefaction(DCL) facility to produce commercial-grade diesel and naphtha liquids from medium-sulfur bituminous coal. The scope of the study includes capital and operating cost estimates, sensitivity analysis and a comparative financial analysis. Based on plant capacity of 50,000BPD, employing Illinois #6 bituminous coal as feed coal the total capital cost appeared $3,994,858,000. Also, the internal rate of return of DCL appeared 6.60% on the base condition. In this case, coal price and sale price of products were the most influence factors. And DCL's payback period demanded a long time(12.3 years), because of high coal price at the present time. According to sensitivity analyses, the important factors on DCL processes were product sale price, feed coal price and the capital cost in order.

• Journal of Adhesion and Interface
• /
• v.16 no.1
• /
• pp.29-34
• /
• 2015

Hydrocarbon resins, which are defined as low molecular weight, amorphous, and thermoplastic polymers, are widely used as tackifier for various types of adhesives, as processing aids in rubber compounds, and as modifiers for plastics polymers such as isotactic polypropylene. Typically, hydrocarbon resins are non-polar, and thus highly compatible with non-polar rubbers and polymer. However, they are poorly compatible with polar system, such as acrylic copolymer, polyurethanes, and polyamides. Moreover, recently the raw materials of hydrocarbon resin from naphtha cracking had been decreased because of light feed cracking such as gas cracking. To overcome this problem, in this study, novel hydrocarbon resins were designed to have a highly polar chemical structure which material is sustainable. And, it was successfully synthesized by Diels-Alder reaction of dicyclopentadiene monomer and sorbic acid from blueberry as renewable resources. Acrylic resins were formulated with various tackifiers solution including sorbic acid grafted hydrogenated dicyclopentadiene hydrocarbon resins in acrylic adhesive and rolling ball tack, loop tack, $180^{\circ}$ peel adhesion strength, and shear adhesion strength were measured. The properties depend on the softening point and polar content of tackifiers.

• The Korean Journal of Petroleum Geology
• /
• v.14 no.1
• /
• pp.45-52
• /
• 2008

The GTL(Gas to Liquids) technology, manufacturing synthesized oil from natural gas, had been developed about 1920 for the military purpose by Fischer and Tropsch, German scientists. And 1960, Sasol company had started commercializing the FT(Fischer-Tropsch) synthesis technology, for the transport fuel in South Africa. Until a recent date, the commercialization of GTL technology had been delayed by low oil price. But concern about depletion of petroleum resources, and development in synthesizing technology lead to spotlight on the GTL businesses. Especially, Qatar, which has rich natural gas fields, aims at utilizing natural gas like conventional oil resources. Therefore, around this nation, GTL plants construction has been promoted. There are mainly 3 processes to make GTL products(Diesel, Naphtha, lube oil, etc) from natural gas. The first is synthesis gas generation unit reforming hydrogen and carbomonoxide from natural gas. The second is FT synthesis unit converting synthesized gas to polymeric chain-hydrocarbon. The third is product upgrading unit making oil products from the FT synthesized oil. There are quite a little sulfur, nitrogen, and aromatic compounds in GTL products. GTL product has environmental premium in discharging less harmful particles than refinery oil products from crude to the human body. In short, the GTL is a clean technology, easier transportation mean, and has higher stability comparing to LNG works.

• Journal of the Korean Institute of Gas
• /
• v.23 no.2
• /
• pp.1-8
• /
• 2019

Because of environmental pollution problem, interests in hydrogen energy has been concentrating sharply. Especially in Korea, the market related with fuel cell vehicles and hydrogen refueling stations is increasing actively under the government-led. However, the actual contributions to environmental improvement effect of hydrogen energy is required to be evaluated with representing reality. In this sense, lots of conventional analyzing tools have some limitations to adapt in Korea's situation directly. It is caused by the differences of raw energy market between the US and Korea. That is, most of analytic tools are developed by representing energy market of the US, where can produce variety of raw feed energy sources. Therefore, in this paper, we propose mass balance based numerical analyzing method, which is suitable for the actual hydrogen production process in Korea for exact evaluation of $CO_2$ emission amount in this country. Using proposed method, we has demonstrated reformed hydrogen from natural gas, LPG and naphtha, electrolysis-based hydrogen, and COG-based hydrogen. Furthermore, with the comparison of GREET program analysis results, robustness of numerical analysis method is demonstrated.