• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.16-18
• /
• 2009

CIGS 박막태양전지는 박막태양전지 중 최고 효율(20%)을 보이는 태양전지로 각광받고 있다. 이러한 고효율 태양전지는 Soda-lime glass 를 기판으로 사용한 경우로 기판과 CIGS층의 열팽창계수가 비슷하고 또 나트륨이 CIGS 성장시 확산하여 광흡수층에 유익한 영향을 준다고 알려져 있다. 본 실험에서는 나트륨이 함유된 소다라임유리와 거의 포함하고 있지 않은 코닝유리를 기판으로 사용하여 CIGS 광흡수층의 차이를 분석하였다. SIMS, SEM분석결과 소다라임유리의 CIGS Mo 부근과 표면부위에 Na 농도가 높으며, grain 크기가 코닝에 비해 작음을 알 수 있었다. 전기적 특성은 소다라임유리기판의 경우 p-type 농도가 코닝유리기판에 비해 약 $10^5{\sim}10^6$천배가량 높음을 확인하였다. 셀특성또한 코닝 11%, SLG는 16%로 효율차이가 발생하였으며 이는 나트륨으로 p-type 전도도가 향상되어 효율이 개선되는 것으로 판단된다.

• Journal of the Korea Concrete Institute
• /
• v.27 no.4
• /
• pp.443-450
• /
• 2015

This paper presents an investigation of the mechanical and microstructural properties of Class F fly ash based geopolymer containing sodium sulfate as an additive. Sodium sulfate was used as an chemical additive at the dosage levels of 0, 2, 4, and 6wt% of fly ash. Sodium hydroxide and sodium silicate solutions were used to activate fly ash. The compressive strengths of geopolymer pastes were measured at the age of 28 days. The microstructures of the geopolymer pastes were examined using XRD, MIP and SEM tests. The additions of 2wt% and 4wt% sodium sulfate produced geopolymers with high strength, while increasing the dosage of levels to 6% resulted in almost no changes in strength, comparing with the control geopolymer. The optimum increase in strength was obtained with the addition of 4wt% sodium sulfate. As the amount of sodium sulfate is increased, no additional crystalline phase was detected and no change of amorphous phase indicated despite the change in the strength development. The increase in the strength was due to the change of pore size distribution in samples. As addition of sodium sulfate altered the morphologies of reactive productions and Si/Al ratios of the reaction products, the strengths were thus affected. It was found that the strengths of geopolymer were larger for lower Si/Al ratios of reaction products formed in samples. The optimal amount of sodium sulfate in the fly ash based geopolymer helps to improve mechanical properties of the geopolymer, on the other hand, the high percentage of sodium sulfate could exist as an impurity in the geopolymer and hinder the geopolymer reaction.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.2 no.2
• /
• pp.3-17
• /
• 1994

The inhibitory effect of sodium ion on the anaerobic degradation of food waste was studied by an anaerobic batch toxicity assay and inhibition model. The anaerobic degradation activity of food waste spiked with over $2g\;Na^+/L$ of sodium ion was severely inhibited at the initial stage of the exposure. The inhibition response of anaerobic microorganisms on the sodium ion estimated from the methane production was differed according to the concentration of sodium ion. The relative acclimation time(RAT) and methanation rate(RMR), defined as the ratios of initial lag time and maximum methane production rate of the sample spiked with sodium ion to the control. respectively, were used to evaluate the acclimation and inhibitory effects quantitatively on the anaerobic microorganisms. When sodium ion was increased from $2g\;Na^+/L$ to $20g\;Na^+/L$, the RAT was exponentially increased from 18.9 to 90. but the RMR was linearly decreased from 0.97 to 0.02. The effects of sodium ion for the maximum methanation rate, first order kinetic constant and ultimate methane production were well evaluated by a generalized nonlinear expression model. it could be described by the uncompetitive inhibition mode. The sodium ion concentration causing 50% inhibition of methanation activity was about $11g\;Na^+/L$, and the critical sodium ion beyond to compelete inhibition was 20 to $21g\;Na^+/L$. The presented results could be used to obtain the design or operation parameters of the anaerobic process treating food waste of high salt.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.107-107
• /
• 2012

3종 복합소재인 양모와 나일론, 레이온의 염색공정은 먼저 알칼리 욕에서 반응성염료로 레이온을 염색한 후, 산성욕에서 산성염료로 양모와 나일론을 염색하는 것이 일반적이다. 그런데 양모, 나일론, 레이온은 알칼리에 민감하므로 면 염색 시 적용되는 강알칼리인 수산화나트륨을 사용하면 섬유의 취화로 인하여 강도와 촉감저하 등의 문제가 발생하게 된다. 따라서 본 연구에서는 알칼리 중 탄산나트륨과 중탄산나트륨을 사용하여 염료를 투입하지 않고 염색공정을 거친 후 백도와 인장강도를 측정하여 황변 및 강도 변화 여부를 알아보았다. 레이온 70%, 양모 19%, 나일론 11%의 혼용율을 가지는 전처리 된 편물(130$g/m^2$, 32 inch, 18 gauge)에 탄산나트륨(시약 1급) 20g/l과 중탄산나트륨(시약 1급) 20g/l 각각을 투입하고 반응성염색공정($60^{\circ}C$, 60 min)으로 처리한 경우와 반응성 염색 후 산성염색공정($98^{\circ}C$, 60 min)으로 처리한 경우로 나누어 측색을 통해 백도와 L, a, b값을 측정하고 KS K 0521에 따라 인장강도 시험을 실시하였다. 그 결과, 탄산나트륨 투입시 백도 값이 중탄산나트륨에 비해 10% 정도 낮아지고 L, a, b값도 상대적으로 yellow 방향으로 이동해 있는 것으로 나타났다. 이것은 황변이 일어남을 의미하며 육안으로 확인하였다. 또한 인장강도 측정결과를 통해 소다회 처리 시 중조에 비해 30% 정도의 강도 저하가 일어남을 확인할 수 있었다. 그러나 반응성염색 후 산성염색을 거치게 되면 황변과 강도 저하 현상이 회복되는 경향을 나타내었다. 즉, 천연/나일론 편물을 반응성염색 시 알칼리로 탄산나트륨을 사용하면 염색공정 상에서 중탄산나트륨에 비해 황변이 일어나 염료 고유의 색상 발현에 영향을 줄 수 있고 강도 또한 30% 정도 저하되지만, 후에 산성염색 공정을 거치면 산 조건과 욕중 효과를 통해 일부 개선됨을 확인하였다. 이와 별도로 이번에는 시판되는 반응성염료 5종과 산성염료 3종을 조합하여 탄산나트륨과 중탄산나트륨 투입에 따른 염색실험을 실시하고 측색(DataColor SF600 광원D65, Strength)을 통해 염착량을 비교하였다. 그 결과, 중탄산나트륨으로 염색하면 탄산나트륨에 비해 모두 염착량이 저하되었으며, 염료의 구조적 차이와 컬러별로도 그 차이는 다양하였다. 그 중 저온에너지형 반응성염료는 탄산나트륨 투입에 비해 47~60% 정도로 가장 양호하였으며, 일부 반응성염료는 20%까지 떨어지는 값을 나타내었다. 이것은 탄산나트륨보다 중탄산나트륨의 알칼리 정도가 낮으므로 반응성염료의 염착이 적은 것으로 생각되며, 저에너지형 반응성염료의 경우에는 낮은 온도나 알칼리 조건에서도 상대적으로 높은 고착률을 나타내므로 적절한 반응성염료의 선택을 통해 그 차이를 극복할 수 있을 것으로 사료된다. 이상의 결과를 통해 탄산나트륨과 중탄산트륨의 알칼리 정도가 강도와 염착량에 미치는 영향의 차이를 고려하여 최적의 현장 처방을 선정해야 함을 알 수 있었다.

• Food Science of Animal Resources
• /
• v.29 no.1
• /
• pp.99-107
• /
• 2009

The study was performed to evaluate the product quality and shelf-life effect of low-fat comminuted sausages (LFS) manufactured with sodium lactate (SL, 2%), grapefruit seed extract (GSE, 0.2%) and Lentinus edodes (LE) powder (0.25%) alone or in combination. Addition of LE powder lower than 0.25% did not affect the product quality and sensory characteristics (p>0.05). However, LFS containing 2% SL in combined with 0.2% GSE inhibited the growth of inoculated Listeria monocytogenes during refrigerated storage for 8 wk. During refrigerated storage, pH decreased until 2 wk of storage and then increased thereafter. In addition, lightness decreased up to the 1st wk and then increased thereafter. However, redness value was the lowest at 8 wk, and expressible moisture (%) was decreased with increased storage time. Purge loss (%) was gradually increased over 8 wk of storage. Microbial counts of Listeria monocytogenes increased as storage time increased. Based on these results, LFS could be manufactured with LE powder (0.25%) and the addition of SL (2%) in combination with GSE (0.2%) inhibited the growth of Listeria monocytogenes during refrigerated storage of LFS.

• Food Science of Animal Resources
• /
• v.25 no.2
• /
• pp.141-148
• /
• 2005

This study was conducted to evaluate physicochemical and textural properties, and antimicrobial effects of low-fat comminuted sausages manufactured with sodium lactate $(3.3\%,\;SL)$ and various levels $(0.1\~0.3\%)$ of grapefruit seed extract (GSE, DF-100) during refrigerated storage for 10 weeks. Low-fat comminuted sausages (LFCS) has pH ranges of $6.09\~6.26,\;74\~76\%$ moisture, $<3\%\;fat,\;16\~17\%$ protein. The addition of SL $(3.3\%)$ and GSE with various levels $(0.1\~0.3\%)$ didn't impair water holding capacity (WHC), vacuum purge (VP) and Hunter color values (L, a, b). LFCS containing SL $(3.3\%)$ increased hardness and chewiness, whereas most TPA values were not affected by the addition of various levels $(0.1\~0.3\%)$ of GSE. LFCS containing $0.2\%\;or\;0.3\%$ GSE retarded the microbial growth of Listeria monocytogenes(LM). The addition of $0.3\%$ GSE in LFCS showed similar antimicrobial effect to $3.3\%$ SL, which kept $10^3 CFU/g$ until 10 weeks of refrigerated storage. Yellowness, VP and cohesiveness tended to be increased with increased storage time. These results indicated that the addition of $0.3\%$ GSE as a replacer for synthetic particularly paI1icuiarly inhibited the microbial growth of LM, resulting in antimicrobial effect similar to those of $3.3\%$ SL treatment without quality defects.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.8
• /
• pp.5-13
• /
• 2012

This research have investigated the application and the injection effect of the alkaline silicasol grouting materia (which is) recently developed. To compare the engineering characteristics of the alkaline silicasol which is formed with 3D-gel and the sodium silicate, it have studied the strength and environmental effects through the laboratory test, and field application was investigated with a review of the injection effect and waterproof through the field test. As a result of the laboratory test, unconfined compression strength of alkaline silicasol was 5 times more than sodium silicate. As a result of the leaching test, a total amount of the eluviated elements was very small, it considered the environment-friendly material. As a result of the field test, considerable reduction of the coefficient of permeability at the hydraulic layer was confirmed, and it could secure that the coefficient of permeability showed a lower than standard value of $10^{-5}cm/sec$.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.5
• /
• pp.858-864
• /
• 2001

This study was performed to investigate the effect of sodium lactate (SL, 60%) and a mixed fat replacer (FR) on the product quality and shelf-life effect of low-fat bologna sausage (LFBS) in a model system during refrigerated storage. Low-fat and regular-fat bologna sausages had pH values ranged from 6.15 to 6.30 and water activity values ranged from 0.95 to 0.96. LFBS had a moisture content of 74~76%, <2% fat and 14~15% protein, whereas regular-fat bologna had 60% moisture, 22% fat and approximately 12% protein in the final products. Expressible moisture (%) increased (p<0.05) in all bolognas, resulting in the soft texture, as the storage time (weeks) increased. LFBS manufactured with SL and a FR had lower (p<0.05) the cooking loss (%) and had higher (p<0.05) texture profile analysis (TPA) values than the regular-fat counterpart. As the sodium lactate level increased up to 5% in the formulation of LFBS, vacuum purge and TPA hardness values also increased (p<0.05), but thiobarbituric acid (TBA) values decreased (p<0.05). Total plate counts of LFBS were reduced (p<0.05) when the addition level of 60% SL solution was more than 3.3%. This result indicated that the increased level of SL (>3.3%) in the combination of a FR in the formulation of LFBS improved the product quality and did inhibit the total microbial growth of LFBS during storage, as compared to the control.

• Journal of Nutrition and Health
• /
• v.50 no.6
• /
• pp.664-678
• /
• 2017

Purpose: To identify the effectiveness of policy evaluation, consistent monitoring is necessary. This study aimed to carry out mid-term evaluation of objectives and programs related to comprehensive plans for sodium intake reduction by 2020 for Seoul city and then reestablish the objectives of the sodium intake reduction plans. Methods: Literature reviews, data analysis, and reviews of expert focus-groups were performed to evaluate objectives, to develop a new goal, and to identify the priority subjects of the sodium intake reduction programs. In order to examine target populations for the programs, awareness and behaviors related to sodium intakes among Seoul citizens were examined by sex, age, and income level using the 2008~2013 Korea National Health and Nutrition Examination Survey data. Results: Current objectives of the sodium intake reduction plan by 2020 for Seoul city were not appropriate, so objectives were reset to 3,600 mg of sodium intake by 2020 among Seoul citizens with 2% reduction per year. Although sodium intake showed a decreasing trend by year, it was still high, especially in men. The sodium intake reduction programs currently in progress have not been assessed at multiple levels across multiple sectors and have only been assessed fragmentarily. For dietary behavior related to sodium intakes by sex, age, and income level, sodium intake was higher in the group with less than 100 g of fruit intake compared to the group with 100 g or more. Subjects aged 30~59 years and the low household income group showed relatively higher sodium intakes. Based on the data analysis and the expert review, the priority subject of the sodium intake reduction programs was determined to be adult men. In terms of a program strategy for sodium intake reduction, multi-level and setting approaches, including work sites, home, and restaurants, were suggested to reduce sodium intakes of the target subject. Conclusion: The suggested objectives should be consistently monitored by data analysis, and the determined programs need to be phased in over 5 years.

• Korean Journal of Food Science and Technology
• /
• v.54 no.1
• /
• pp.75-79
• /
• 2022

Fresh, washed ginseng can be contaminated with microorganism loads as high as 6.5 log CFU/g for total bacteria and 4.3 log CFU/g for mold. The goal of this study was to test eight antibacterial agents on ginseng. Immersing fresh ginseng washed in 1% (w/w) sodium citrate, sodium diacetate, sodium acetate, citric acid, and sodium lactate solution for 1 h resulted in a bactericidal effect of 31.0-97.5% for total bacteria. Among the organic acids, sodium citrate had the best antibacterial effect, with total bacteria reduced from 6.5 log to 4.9 log CFU/g. A 1% (w/w) vitamin B₁ lauryl sulfate solution with surfactant function by hydrophilic and hydrophobic sites can reduce 2.7 log CFU/g (99.8% inactivation) on total bacteria. In the 1% (w/w) calcium oxide solution, total bacteria were reduced by 3 log, showing an excellent inactivation effect of 99.9%. Calcium oxide is a highly useful material for inactivation of microorganisms in fresh ginseng.