Browse > Article
http://dx.doi.org/10.4334/JKCI.2015.27.4.443

Microstructure and Strength of Class F Fly Ash based Geopolymer Containing Sodium Sulfate as an Additive  

Jun, Yubin (School of Urban and Environmental Engineering, Ulsan National Institute of Science and Technology (UNIST))
Oh, Jae-Eun (School of Urban and Environmental Engineering, Ulsan National Institute of Science and Technology (UNIST))
Publication Information
Journal of the Korea Concrete Institute / v.27, no.4, 2015 , pp. 443-450 More about this Journal
Abstract
This paper presents an investigation of the mechanical and microstructural properties of Class F fly ash based geopolymer containing sodium sulfate as an additive. Sodium sulfate was used as an chemical additive at the dosage levels of 0, 2, 4, and 6wt% of fly ash. Sodium hydroxide and sodium silicate solutions were used to activate fly ash. The compressive strengths of geopolymer pastes were measured at the age of 28 days. The microstructures of the geopolymer pastes were examined using XRD, MIP and SEM tests. The additions of 2wt% and 4wt% sodium sulfate produced geopolymers with high strength, while increasing the dosage of levels to 6% resulted in almost no changes in strength, comparing with the control geopolymer. The optimum increase in strength was obtained with the addition of 4wt% sodium sulfate. As the amount of sodium sulfate is increased, no additional crystalline phase was detected and no change of amorphous phase indicated despite the change in the strength development. The increase in the strength was due to the change of pore size distribution in samples. As addition of sodium sulfate altered the morphologies of reactive productions and Si/Al ratios of the reaction products, the strengths were thus affected. It was found that the strengths of geopolymer were larger for lower Si/Al ratios of reaction products formed in samples. The optimal amount of sodium sulfate in the fly ash based geopolymer helps to improve mechanical properties of the geopolymer, on the other hand, the high percentage of sodium sulfate could exist as an impurity in the geopolymer and hinder the geopolymer reaction.
Keywords
Class F fly ash; sodium sulfate; additive; geopolymer; MIP;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Bakharev, T., "Geopolymeric materials prepared using Class F fly ash and elevated temperature curing", Cement and Concrete Research, Vol.35, 2005, pp.1224-1232.   DOI   ScienceOn
2 Somna, K., Jatruapitakkul, C., Kajitvichyanukul, P., and Chindaprasirt, P., "NaOH-activated ground fly ash geopolymer cured at ambient temperature", Fuel, Vol.90, No.6, 2011, pp.2118-2124.   DOI   ScienceOn
3 Bondar, D., Lynsdale, C. J., Milestone, N. B., Hassani, N., and Ramezanianpour, A. A., "Effect of type, form, and dosage of activators on strength of alkali-activated natural pozzolans", Cement and Concrete Composites, Vol.33, No.2, 2011, pp.251-260.   DOI   ScienceOn
4 Cho, Y. K., Moon, G. D., La, J. M., and Jung, S. H., "Effect of curing conditions on the strength of fly-ash based geopolymer", Journal of the Korea Concrete Institute, Vol.26, No.4, 2014, pp.449-456.   DOI   ScienceOn
5 Alvarez-Ayuso, E., Querol, X., Plana, F., Alastuey, A., Moreno, N., Izquierdo, M., Font, O., Moreno, T., Diez, S., Vazquez, E., and Barra, M.,"Environmental, physical and structural characterisation of geopolymer matrixes synthesised from coal (co-)combustion fly ashes", Journal of Hazardous Materials, Vol.15, No.1-3, 2008, pp.175-183.
6 Chindaprasirt P., Jaturapitakkul C., Chalee, W., and Rattanasak, U., "Comparative study on the characteristics of fly ash and bottom ash geopolymers", Waste Management, Vol.29, 2009, pp.539-543.   DOI   ScienceOn
7 Chang, J. J., Yeih, W., and Hung, C. C., "Effects of gypsum and phosphoric acid on the properties of sodium silicate-based alkali-activated slag pastes", Cement and Concrete Composites, Vol.27, No.27, 2005, pp.85-91.   DOI   ScienceOn
8 Gorhan, G. and Kurklu, G., "The influence of the NaOH solutionon the properties of the fly ash-based geopolymer mortar cured at different temperatures", Composites Part B: Engineering, Vol.58, 2014, pp.371-377.   DOI
9 Fernandez-Jimenez, A. M., Palomo, A., and Lopez-Hombrados, C., "Engineering properties of alkali-activated fly ash concrete", ACI Materials Journal, Vol.103, No.2, 2006, pp.106-112.
10 Garcia, E., Campos-Venegas, K., Gorokhovsky, A., and Fernandez, A., "Cementitious composites of pulverized fuel ash and blast furnace slag activated by sodium silicate: effect of $Na_2O$ concentration and modulus", Advances in Applied Ceramics, Vol.105, No.4, 2006, pp.201-208.   DOI   ScienceOn
11 Pu, X. C., Gan, C. C., Wang, S. D., and Yang, C. H., "Summary reports of research on alkali-activated slag cement and concrete", Chongqing Institute of Architecture and Engineering, Vols.1-6, 1988.
12 Kim, M. S., Jun, Y., Lee, C., and Oh, J. E., "Use of CaO as an activator for producing a price-competitive non-cement structural binder using ground granulated blast furnace slag", Cement and Concrete Research, Vol.54, 2013, pp. 208-214.   DOI   ScienceOn
13 Poon, C. S., Kou, S. C., Lam, L., and Lin, Z. S., "Activation of fly ash/cement systems using calcium sulfate anhydrite ($CaSO_4$)", Cement and Concrete Research, Vol.31, No.6, 2001, pp.873-881.   DOI   ScienceOn
14 Xu, A. and Sarkar, S. L., "Microstructural study of gypsum activated fly ash hydration in cement paste", Cement and Concrete Research, Vol.21, 1991, pp.1137-1147.   DOI   ScienceOn
15 Shi, C. J., "Early microstructure development of activated lime-fly ash pastes", Cement and Concrete Research, Vol.26, No.9, 1996, pp.1351-1359.   DOI   ScienceOn
16 Boonserm, K., Sata, V., Pimraksa, K., and Chindaprasirt, P., "Microstructure and strength of blended FBC-PCC fly ash geopolymer containing gypsum as an additive", ScienceAsia, Vol.38, 2012, pp.175-181.   DOI
17 Rattanasak, U., Pankhet, K., and Chindaprasirt, P., "Effect of chemical admixtures on properties of high-calcium fly ash geopolymer", International Journal of Minerals, Metallurgy, and Materials, Vol.18, No.3, 2011, pp.364-369.   DOI
18 Pimraksa, K. and Chindaprasirt, P., "Lightweight bricks made of diatomaceous earth, lime and gypsum", CeramicsI nternational, Vol.35, No.1, 2009, pp.471-478.
19 Skvara, F., Kopecky, L., Smilauer, V., and Bittnar, Z., "Material and structural characterization of alkali activated low-calcium brown coal fly ash", Journal of Hazardous Materials, Vol.168, No.2-3, 2009, pp.711-720.   DOI   ScienceOn
20 Mehta, P. K., and Monteiro, P. J. M., Concrete: microstructure, properties, and materials: McGraw-Hill New York, 2006.
21 Jun, Y. and Oh, J. E., "Mechanical and microstructural dissimilarities in alkali-activation for six Class F Korean fly ashes", Construction and Building Materials, Vol.52, 2014, pp.396-403.   DOI   ScienceOn
22 Zhang, L., Ahmari, S., and Zhang, J., "Synthesis and characterization of fly ash modified mine tailings-based geopolymers", Construction and Building Materials, Vol.25, 2011, pp.3773-3781.   DOI   ScienceOn
23 De Silva, P., Sagoe-Crenstil, K., and Sirivivatnanon, V., "Kinetics of geopolymerization: Role of $Al_2O_3$ and $SiO_2$", Cement and Concrete Research, Vol.37, 2007, pp.512-518.   DOI   ScienceOn
24 Oh, J. E., Moon, J., Oh, S. G., Clark, S. M., and Monteiro, P. J. M., "Microstructural and compositional change of NaOHactivated high calcium fly ash by incorporating Na-aluminate and co-existence of geopolymeric gel and C-S-H(I)", Cement and Concrete Research, Vol.42, 2012, pp.673-685.   DOI   ScienceOn
25 Boonserm, K., Sata, V., Pimraksa, K., and Chindaprasirt, P., "Impoved geopolymerization of bottom ash by incorporating fly ash and using waste gypsum as additive", Cement & Concrete Composites, Vol.34, 2012, pp.819-824.   DOI   ScienceOn