• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.116-118
• /
• 2011

일반적으로 나노입자의 크기는 나노복합체의 역학적 특성에 상당한 영향을 미친다. 이에 본 연구에서는 나노입자 크기를 고려한 나노복합체 재료 구성모델 (Kim et al., 2011)을 소개하고자 한다. Kim et al. (2011)에 의해서 나노입자 크기효과를 위한 Size-dependent Eshelby tensor가 미세역학 모델에 적용되었으며, 나노스케일 해석과 함께 다양한 수치해석을 수행하였다. 특히, 본 연구에서는 이를 활용하여 $SiO_2$/Epoxy 나노복합체의 역학적 특성을 예측해 보았다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.27 no.4
• /
• pp.524-533
• /
• 2003

DBD(Dielectric Barrier Discharge) plasma in air is well established for the production of large quantities of ozone and is more recently being applied to aftertreatment processes for HAPs(Hazardous Air Pollutants). Aim of this work is to determine design and operating parameters of a hybrid air cleaning system. DBD and ESP(Electrostatic Precipitator) are used as nano particle charger and collector, respectively. Pelletized MnO$_2$ catalyst or activated carbon is used fer ozone decomposition or adsorption material. AC voltage of 7～10 KV(rms) and 60 Hz is used as DBD plasma source. DC - 8 KV is applied to the ESP for particle collection. The overall particle collection efficiency for the hybrid system is over 85 % under 0.64 m/s face velocity. Ozone decomposition efficiency with pelletized MnO$_2$ catalyst or activated carbon packed bed is over 90 % when the face velocity is under 0.4 m/s in dry air.

• Polymer(Korea)
• /
• v.29 no.5
• /
• pp.440-444
• /
• 2005

An increase in the surface area of drugs by reducing particle sizes from microns to nanometers has been known as an efficient method to improve the bioavailability of water-insoluble drugs. To prevent drug nanoparticles from aggregation during the processes of drug formulation, a limited number of pharmaceutical inactive ingredients such as hydroxypropyl cellulose has been employed as stabilizers or dispersants. In this study, copolymers of hydrophilic and hydrophobic amino acids were synthesized by the ring opening polymerization of their N-carboxyanhydride monomers and evaluated as novel candidates to stabilize the nanoparticles of a water insoluble drug, naproxen. Naproxen nanoparticles stabilized by synthesized amino acid copolymers were successfully prepared in the size of $200\~500nm$ in 60 min by a wet comminution process. Particle size analysis showed that the effective stabilization performance of copolymers required the hydrophobic moiety content to be higher than $10 mol\%$. However, the molecular weight and morphology of copolymers was not the critical parameters in determining the particle size reduction. Their particle size was found to be stable up to 14 days without significant aggregation.

• Resources Recycling
• /
• v.15 no.4 s.72
• /
• pp.19-26
• /
• 2006

The preparation of Ag nano-powder from aqueous silver nitrate solution, which would be available for the recycling of silver bearing wastes, was investigated by a reductive precipitation reaction using hydrazine hydrate as a reducing agent. Silver solution was prepared by dissolving silver nitrate with distilled water, and then the dispersant, Tamol NN8906 or Tween 20, was also mixed to avoid the agglomeration of particles during the reductive reaction followed by the addition of hydrazine hydrate to prepare Ag nano-particles. Ag particles obtained from the reduction reaction from silver solution were characterized using the particle size analyzer and TEM to determine the particle size distribution and morphology. It was found that about 100% excess of hydrazine hydrate was required to reduce completely silver ions in the solution. Ag powders with very narrow distribution could be obtained when Tamol NN8906 was used as the dispersant. In case of Tween 20, the particle size distribution showed typically the bimodal or multimodal distribution and the morphology of Ag particles was found to be irregular shape in both cases.

• Applied Chemistry for Engineering
• /
• v.24 no.3
• /
• pp.260-265
• /
• 2013

In this study, nano-emulsions containing 0.01, 0.03, 0.05, and 0.10% ethyl acetate fraction of Hippophae rhamnoides (H. rhamnoides) leaf extracts were prepared. The particle size, particle size distribution and skin permeability of the nano-emulsions were evaluated for five weeks. Nano-emulsion was prepared by the sequential use of homogenizer and microfluidizer. Nano-emulsion containing the ethyl acetate fraction exhibited a monodispersed form. Nano-emulsion containing 0.03% ethyl acetate fraction was the most stable for five weeks. The in vitro skin permeation study of nano-emulsion containing 0.03% ethyl acetate fraction was carried out using Franz diffusion cell. The nano-emulsion showed a better skin permeability than that of O/W emulsion. These results indicate that the nano-emulsion containing the ethyl acetate fraction of H. rhamnoides leaf extract showed a remarkable stability and skin permeability than that of O/W emulsion.

• Applied Chemistry for Engineering
• /
• v.21 no.6
• /
• pp.670-675
• /
• 2010

Inorganic-organic hybrid material such as vinyl-nano sized silica ball was synthesized by acrylo-alkoxysilane and nano silica ball with different particle size. And then they were formulated into acrylic-melamine clearcoat. This material is fully characterized with various analytical methods and applied for strength measurement. The glossy effect, matting effect and anti-scratching properties of materials were investigated for further growth and maintenance. When the particle size of nano silica ball is 20~30 nm, the glossy retain effect was increased by 7% compared to bare acrylic-melamine clearcoat. When a commercially available silica Aerosil 200 (Hydrophilic fumed silica, average particle size 12 nm, Degussa) react with vinyl alkoxysilane vinyl-fumed silica complex form. The vinyl-fumed silica along with clearcoat increases only 2% increase at glossy retain. Nano-scratch test results also support the glossy retain effect of vinyl nano-sized silica ball in clearcoat.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.91-91
• /
• 2015

반도체 공정의 발전에 의해 최근 생산되는 메모리 등은 십 수 나노미터까지 좁아진 선 폭을 갖게 되었다. 이러한 이유로, 기존에는 큰 문제를 발생시키지 않던 나노미터 영역의 입자들이 박막 증착 공정과 같은 반도체 제조공정 수율을 저감시키게 되었다. 따라서 오염입자의 유입을 막거나 제어하기 위해 transmission electron microscopy (TEM)나 scanning electron microscopy (SEM)과 같은 전자현미경을 활용한 비 실시간 입자 측정 방법 및 광원을 이용하는 in-situ particle monitor (ISPM) 및 전기적 이동도를 이용한 scanning mobility particle sizer (SMPS) 등 다양한 원리를 이용한 실시간 입자 측정방법이 현재 사용중에 있다. 이 중 진공 내 입자의 수농도를 측정하기 위해 개발된 particle beam mass spectrometer (PBMS) 기술은 박막 증착 공정 등 chemical vapor deposition (CVD) 방법을 이용하는 진공공정에서 활용 가능하여 개발이 진행되어 왔다. 본 연구에서는 PBMS의 한계점인 입자 밀도, 형상 등의 특성분석이 용이하도록 PBMS와 scanning electron microscopy (SEM), 그리고 energy dispersive spectroscopy (EDS) 기술을 결합하여 입자의 직경별 개수농도, 각 입자의 형상 및 성분을 함께 측정 가능하도록 하였다. 협소한 반도체 제조공정 내부 공간에 적용 가능하도록 기존 PBMS 대비 크기 또한 소형화 하였다. 각 구성요소인 공기역학 집속렌즈, electron gun, 편향판, 그리고 패러데이 컵의 설치 및 물리적인 교정을 진행한 후 입자발생장치를 통해 발생시킨 sodium chloride 입자를 상압 입자 측정 및 분류장치인 SMPS 장치를 이용하여 크기별로 분류시켜 압력차를 통해 PBMS로 유입시켜 측정을 진행하였다. 나노입자의 입경분포, 형상 및 성분을 측정결과를 토대로 장치의 측정정확도를 교정하였다. 교정된 장치를 이용하여 실제 박막 증착공정 챔버의 배기라인에서 발생하는 입자의 수농도, 형상 및 성분의 복합특성 측정이 가능하였으며, 최종적으로 실제 공정에 적용가능하도록 장치 교정을 완료하였다.

• Applied Chemistry for Engineering
• /
• v.24 no.4
• /
• pp.357-362
• /
• 2013

Monodispersed polystyrene latex spheres (PLS) and PS-MPS/silica composite nanospheres were used to test high efficiency particulate air (HEPA) filters. Prior to filter tests, all nanospheres used in this work were characterized by measuring their average particle diameters and coefficients of variation (CV) for assessing them as artificial dusts. The average particle sizes of PLS and composite nanospheres could be well controlled in the range of 100~300 nm well by changing reaction temperature and the amount of a stabilizer during emulsion polymerization. The CV of all nanospheres were also in the range of 3~7%, lower than 15% that is the criterion for monodispersed particle distributions. Furthermore the results of HEPA filter tests show that all nanospheres used were quite proper as artificial dusts for testing air filters.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.4
• /
• pp.679-687
• /
• 2014

In this study, a new paint which is able to resist the cavitation erosion is tried to be developed by using urethane added with nano particles such as multi-wall and single-wall carbon nano tube and spherical and fiber type graphite. The new paint synthesized was characterized with physical properties and resistivity to cavitation erosion($t_{50}$). Among nano particles, fiber type graphite($t_{50}$ 292min) showed high hardness and wear resistance compared with spherical type($t_{50}$ 182min). For carbon nano tube, single-wall type($t_{50}$ 286min) was higher than multi-wall type in wear resistance. Fiber-type graphite was the best nano-particle for paint with resistivity to cavitation erosion. In the application test of paint, the manually painted sample showed surface with smooth but the surface of sample prepared with spray was not smooth. During spray, dust was fixed on the surface.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.243-246
• /
• 2009

본 연구에서는 분자동역학 전산모사와 미시역학 모델을 이용하여 나노입자의 크기와 체적분율 변화가 나노복합재의 물성변화에 미치는 영향을 효과적으로 묘사할 수 있는 순차적 브리징 해석기법을 개발하였다. 나노 입자의 크기변화와 체적분율 변화에 따른 영률과 전단계수를 분자동역학 전산모사를 통해 예측한 후, 이를 연속체 모델에서 구현하기 위해 다중입자 모델을 적용하였다. 나노입자의 크기효과를 반영하기 위해 입자와 기지 사이에 유효계면을 추가적인 상으로 도입하였고, 체적분율 효과는 나노복합재를 둘러싸는 무한영역의 물성값을 통해 조절되도록 하였다. 유효계면과 무한영역의 물성을 입자의 반경과 체적분율의 함수로 근사한 후, 다양한 입자의 크기와 체적분율에서 나타나는 나노복합재의 물성변화를 예측하였다. 제안된 해석기법의 적용을 통해 분자동역학 전산모사 결과와 잘 일치하는 예측해를 효과적으로 얻을 수 있었다.