• 한국전기전자재료학회논문지
• /
• 제27권9호
• /
• pp.582-588
• /
• 2014

3 mol% Co-added $Ni(OH)_2$ fine powders, which showed ${\beta}$-phase, as positive electrode materials have been fabricated using $NiSO_4{\cdot}6H_2O$ aqueous solution by ultrasonic spray-chemical precipitation and subsequent hydrothermal method, and sheet-like Ni nanopowder was fabricated by mechano-chemical reduction method. The addition effects of the sheet-like Ni nanopowder on the electrochemical properties of the positive electrode in Ni-Zn Redox flow battery were investigated. Impedance spectroscopy revealed that the addition of the sheet-like Ni nanopowder resulted in decrease in the electrical resistivity; 10 wt.% addition reduced the electrical properties by a fifth. Cyclic voltammetry showed the addition of the sheet-like Ni nanopowder resulted in decrease in the potential difference of oxidation and reduction; this means the increase in the reversability for electrode reduction. Charge/discharge measurement confirmed that the addition of the sheet-like Ni nanopowder resulted in the increase in the discharge efficiency.

• 한국전기전자재료학회논문지
• /
• 제24권7호
• /
• pp.589-593
• /
• 2011

[ $SnO_2$ ]nano powders were prepared by solution reduction method using tin chloride($SnCl_2{\cdot}2H_2O$), hydrazine($N_2H_4$) and NaOH. The $SnO_2$ thick films for gas sensors were fabricated by screen printing method on alumina substrates and annealed at $300^{\circ}C$ in air, respectively. XRD patterns of the $SnO_2$ nano powders showed the tetragonal structure with (110) dominant orientation. The particle size of $SnO_2$ nano powders at the ratio of $SnCl_2:N_2H_4$+NaOH= 1:6 was about 60 nm. The sensing characteristics were investigated by measuring the electrical resistance of each sensor in a test box. Sensitivity of $SnO_2$ gas sensor to 5 ppm $CH_4$gas and 5 ppm $CH_3CH_2CH_3$ gas was investigated for various $SnCl_2:N_2H_4$+NaOH proportion. The highest sensitivity to $CH_4$ gas and $CH_3CH_2CH_3$ gas of $SnO_2$ sensors was observed at the $SnCl_2:N_2H_4$+NaOH= 1:8 and $SnCl_2:N_2H_4$+NaOH= 1:6, respectively. Response and recovery times of $SnO_2$ gas sensors prepared by $SnCl_2:N_2H_4$+NaOH= 1:6 was about 40 s and 30 s, respectively.

• 한국재료학회지
• /
• 제13권5호
• /
• pp.328-332
• /
• 2003

Characteristics of $TiO_2$nanoparticles controlled by precursor flow rate and reaction temperature in chemical vapor condensation process were interpreted in the view of decisive reaction factors, i.e. supersaturation ratio, concentration of vapor molecule, collision frequency and rate, and residence time, which directly affect the particle size and size distribution in CVC reactor. As results, the increases of precursor flow rate and reaction temperature induced the increase in the average sizes of $TiO_2$ nanoparticles in CVC reactor by acceleration of coagulation growth due to the increase of collision between $TiO_2$vapor molecules and particles. The effects of reaction factors on the characteristics of$TiO_2$nanoparticles were discussed with considering particle formation process in CVC reactor under given process parameters.

• 동력기계공학회지
• /
• 제17권1호
• /
• pp.110-115
• /
• 2013

The electrochemical performance and microstructure of Al-Si, Al-Si/C was investigated as anode for lithium ion battery. The Al-Si nano composite with 5 : 1 at% ratio was prepared by arc-discharge nano powder process. However, some of problem is occurred, when Al nano composite was synthesized by this manufacturing. The oxidation film is generated around Al-Si particles for passivating processing in the manufacture. The oxidation film interrupts electrical chemistry reaction during lithium ion insertion/extraction for charge and discharge. Because of the existence the oxidation film, Al-Si first cycle capacity is very lower than other examples. Therefore, carbon synthsized by glucose ($C_6H_{12}O_6$) was conducted to remove the oxidation film covered on the composite. The results showed that the first discharge cycle capacity of Al-Si/C is improved to 113mAh/g comparing with Al-Si (18.6mAh/g). Furthermore, XRD data and TEM images indicate that $Al_4C_3$ crystalline exist in Al-Si/C composite. In addition the Si-Al anode material, in which silicon is more contained was tested by same method as above, it was investigated to check the anode capacity and morphology properties in accordance with changing content of silicon, Si-Al anode has much higher initial discharge capacity(about 500mAh/g) than anode materials based on Aluminum as well as the morphology properties is also very different with the anode based Aluminum.

• 마이크로전자및패키징학회지
• /
• 제23권4호
• /
• pp.125-133
• /
• 2016

도전 페이스트의 필러로 사용되기 위한 미세 Cu 입자를 제조하기 위하여 아산화동 분말과 황산간의 고속 화학 반응을 이용한 증류수 기반의 습식 공정으로 Cu 입자의 합성을 실시하였다. $7^{\circ}C$에서 48%의 황산과 30 g의 $Cu_2O$를 사용한 조건에서 미반응 $Cu_2O$ 입자들이 제거되면서 입자들간의 응집이 개선된 순수 Cu 나노입자들이 제조되었다. 이후 최적 첨가제의 선택을 통하여 입자들간의 응집이 가장 억제된 224 nm 크기의 Cu 입자들을 제조할 수 있었다. 이러한 미세 Cu 입자 시료에서는 응집된 형태의 조대 입자들이 다소 존재하였고 입자들간의 연결부도 일부 관찰되었으나, 삼본밀을 사용한 레진 포물레이션과의 혼합 후에는 응집된 형태의 조대 입자들이 파괴되고 입자들간의 연결부들이 탈착되어 입자들의 응집이 풀리는 거동을 관찰할 수 있었다.

• 한국가스학회지
• /
• 제15권4호
• /
• pp.27-32
• /
• 2011

가스 설비의 증가와 함께 가스 사용시 안전관리가 중요해 지고 있다. 그 일환으로 국가적인 차원에서 U-safety 시스템 도입이 추진되고 있으며, 이를 위해서는 실시간으로 현장에서 가스 누출에 대한 검지가 가능해야 한다. 탄화수소류로 주로 구성된 가스의 누출 감지는 열저항을 이용하는 방식이지만, 도관에 함께 매설될 시에는 폭발 가능성으로 인해 적용이 불가하다. 이에 상온에서 메탄이나 일산화탄소와 같은 탄화수소류를 전기화학적 촉매 반응으로 검지할 수 있는 방법이 필요하다. 본 연구에서는 다공성 골드 분말을 팰렛 형태로 제조하여 백금 나노입자를 전해 도금법으로 도핑하여, CO의 $CO_2$ 산화 반응을 유도할 수 있는 촉매 전극을 제조하였다. Pt/PAu 전극의 경우, 약 21%의 CO 전환률을 보여서 탄화수소류의 상온 촉매전환과 함께 전기화학적 센싱이 가능함을 보였다. 이는 추후 메탄 가스 검지에 적용할 수 있는 여지를 마련했다고 판단된다.

• 한국재료학회지
• /
• 제25권12호
• /
• pp.659-665
• /
• 2015

The self-propagating high temperature synthesis approach was applied to synthesize amorphous boron nano-powders in argon atmospheres. For this purpose, we investigated the characteristics of a thermally induced combustion wave in the $B_2O_3+{\alpha}Mg$ system(${\alpha}=1.0-8.0$) in an argon atmospheres. In this study, the exothermic nature of the $B_2O_3-Mg$ reaction was investigated using thermodynamic calculations. Experimental study was conducted based on the calculation data and the SHS products consisting of crystalline boron and other compounds were obtained starting with a different initial molar ratio of Mg. It was found that the $B_2O_3$ and Mg reaction system produced a high combustion temperature with a rapid combustion reaction. In order to regulate the combustion reaction, NaCl, $Na_2B_4O_7$ and $H_3BO_3$ additives were investigated as diluents. In an experimental study, it was found that all diluents effectively stabilized the reaction regime. The final product of the $B_2O_3+{\alpha}Mg$ system with 0.5 mole $Na_2B_4O_7$ was identified to be amorphous boron nano-powders(< 100 nm).

• 한국재료학회지
• /
• 제25권2호
• /
• pp.95-99
• /
• 2015

$NiAl_2O_4$ nanoparticle was synthesized by a reverse micelle processing for inorganic pigment. $Ni(NO_3)_2{\cdot}6H_2O$ and $Al(NO_3)_3{\cdot}9H_2O$ were used for the precursor in order to synthesize $NiAl_2O_4$ nanoparticles. The aqueous solution, which consisted of a mixing molar ratio of Ni/Al, was 1:2 and heat treated at $800{\sim}1100^{\circ}C$ for 2h. The average size and distribution of synthesized $NiAl_2O_4$ powders are in the range of 10-20 nm and narrow, respectively. The average size of the synthesized $NiAl_2O_4$ powders increased with an increasing water-to-surfactant molar ratio and heating temperature. The crystallinity of synthesized $NiAl_2O_4$ powder increased with an increasing heating temperature. The synthesized $NiAl_2O_4$ powders were characterized by X-ray diffraction analysis(XRD), a field emission scanning electron microscopy(FE-SEM), and a color spectrophotometer. The properties of synthesized powders were affected as a function such as a molar ratio and heating temperature. Results indicate that synthesis using a reverse miclle processing is a favorable process to obtain $NiAl_2O_4$ spinels at low temperatures. The procedure performed suggests that this new synthesis route for producing these oxides has the advantage of being fast and simple. Colorimetric coordinates indicate that the pigments obtained exhibit blue colors.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2010년도 춘계학술발표대회
• /
• pp.34.2-34.2
• /
• 2010

Cu(In,Ga)Se2 (CIGS) 화합물 반도체를 기반으로 한 태양전지는 박막태양전지 기술 중 세계최고효율을 기록하고 있다. CIGS를 합성하는 방법은 동시증발법, 스퍼터링/셀렌화 등의 진공방식과 나노분말법, 전착법, 용액법 등의 비진공방식이 있으나, 현재까지 진공방식이 양산기술로서 완성도가 높은 것으로 알려져 있다. 특히 스퍼터링에 의한 전구체 박막 증착과 셀렌 분위기에서의 열처리 공정을 결합시킨 2단계 공정은 동시증발법에 비해 대면적 모듈 제조에 유리한 것으로 알려져 있다. 셀렌화 공정은 통상 반응성이 매우 높은 H2Se 기체를 이용하고 있으나, 부식성 및 안전성 문제를 해결하기 위해 추가적인 설비가 요구되므로 제조비용을 높이는 단점을 갖는다. 한편, Se 증기를 이용하면 안전성은 담보되나 낮은 반응성으로 인해 고온에서 장시간 열처리를 해야하는 문제를 안고 있다. 본 연구에서는 새로운 Se 증기를 사용하되 반응효율을 높일 수 있는 새로운 셀렌화 열처리방법을 제시하고자 한다. 기존의 Se 증기가 별도의 증발원을 이용하여 공급된 것과는 달리, 금속전구체 직상부에 Se이 코팅된 별도의 커버글라스를 위치시켜 Se의 손실을 최대한 억제하였다. Se 커버글라스가 밀착된 금속프리커서를 $200{\sim}600^{\circ}C$ 온도범위에서 열저항가열로 내부에서 열처리하였으며, 추가로 Se을 공급하지는 않았다. 이와 같은 방법 제조된 CIGS 박막의 물성을 X선회절법, 주사전자현미경 등으로 관찰하였으며, 예비실험결과 비교적 낮은 온도에서 chalcopyrite 상이 형성됨을 확인하였다. 근접셀렌화에 의해 제조된 CIGS 박막이 적용된 태양전지를 제조하여 셀렌화 공정변수에 따른 소자특성변화를 제시하고자 한다.

• 한국재료학회지
• /
• 제27권10호
• /
• pp.513-517
• /
• 2017

An optimum route to fabricate a hybrid-structured W powder composed of nano and micro size powders was investigated. The mixture of nano and micro W powders was prepared by a ball milling and hydrogen reduction process for $WO_3$ and W powders. Microstructural observation for the ball-milled powder mixtures revealed that the nano-sized $WO_3$ particles were homogeneously distributed on the surface of large W powders. The reduction behavior of $WO_3$ powder was analyzed by a temperature programmed reduction method with different heating rates in Ar-10% $H_2$ atmosphere. The activation energies for the reduction of $WO_3$, estimated by the slope of the Kissinger plot from the amount of reaction peak shift with heating rates, were measured as 117.4 kJ/mol and 94.6 kJ/mol depending on reduction steps from $WO_3$ to $WO_2$ and from $WO_2$ to W, respectively. SEM and XRD analysis for the hydrogen-reduced powder mixture showed that the nano-sized W particles were well distributed on the surface of the micro-sized W powders.