• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.35-36
• /
• 2013

본 발표는 atomic force microscopy (원자력현미경) 기법을 이용하여 그래핀을 포함한 다양한 나노물질의 물리적, 화학적, 역학적, 또한 전기적 특성의 상호영향 (correlation)의 이해를 목표로 한다. 원자력 현미경은 표면과 검침사이의 물리적 힘을 측정하고 이를 피드백시킴으로써 표면의 형상을 얻는 원리이며 표면의 역학적 (마찰력, 점착력), 전기수송적 특성을 동시에 측정할 수 있는 이점이 있다. 또한 원자력 현미경은 표면의 구조적인 특성과 표면에너지에 대한 정보를 나노미터 스케일에서 줄 수 있다. 나노선, 나노입자, 또한 연료전지의 모델 시스템에서 원자력현미경을 이용한 표면의 나노역학적 특성 및 점착력의 측정이 다루어질 것이며 표면공학을 통한 표면처리에 따른 마찰력과 점착력의 제어를 논의할 것이다.

• Journal of the Korean Vacuum Society
• /
• v.14 no.1
• /
• pp.40-48
• /
• 2005

Bucky shuttle memory systems were investigated by the classical molecular dynamics(MD) simulations. Energetics and operating response of the shuttle-memory-elements u?ere examined by MD simulations of the C/sub 60/ shuttle in the nanomemory systems under various external force fields. Single-nanopeapod type was consisting of three fullerenes encapsulated in (10, 10) boron-nitride nanotube and filled Cu electrode. Studied systems could be applied to nonvolatile memory. MD simulation results showed that the stable bit flops could be achieved from the external force fields of 0.1 eV/Å for single-nanopeapod type.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.423-423
• /
• 2005

A carbon nanotube-based nanoelectromechanical device in resonance is examined theoretically. Mechanical deflections are electrically induced and resonantly excited at the fundamental frequency in cantilevered carbon nanotube. The electrically conducting elastic beam with van der Waals interactions at the tip is used for the modeling of the carbon nanotube device. Due to the elastic, electrical, and van der Waals interactions, the total energy of the system shows the unsymmetric two-well potentials. The predictions can be made that the device exhibits its nonlinear dynamic features in the two-well potentials. Also it is predicted that the fundamental frequency of the carbon nanotube device was changed by the nonlinear interactions induced by electrical and van der Waals potentials between carbon nanotube and ground surface of the device.

• Electronics and Telecommunications Trends
• /
• v.27 no.1
• /
• pp.1-18
• /
• 2012

미래 사회는 나노기술(NT)을 바탕으로 IT-ET-BT 기술이 융합된 유비쿼터스 사회로 진화하고 있으며, 미래 산업 사회로의 전환을 위해서는 성능개선이 아닌 성능한계 돌파의 패러다임 전환이 가능한 임계성능의 나노 소재/신소자의 개발이 절실히 요구되고 있다. 또한 차세대 단말기는 휴대성의 편리함, 융복합화/다기능화, 인간 친화형이 요구되고, flexible/stretchable/bendable한 형태로 발전하고 있는 상황이다. 나노 피에조트로닉스(nanopiezotronics) 기술은 역학적 에너지를 전기적 에너지로 변환하는 나노 발전 소자(nanogenerator)의 원리를 기반으로 하며 나노선, 나노벨트와 같은 1차원적 나노구조 소재의 압전성과 반전도성이 결합된 특성을 이용한 신기능의 미래 IT 융합 나노 전자/에너지 소자를 구현하는 기술로서 미래 유망 기술로 부각되고 있다. 현재 기술 수준은 압전 전계 효과 트랜지스터, 압전-다이오드, 압전 센서, 압전 나노 발전 소자 등과 같은 prototype 소자를 제작하는 수준에 머무르고 있으나 향후 초고감도 압전 센서, 자가발전 MEMS/NEMS 및 나노 시스템, 스마트 웨어러블 시스템, 건강 모니터링 시스템, 인체 삽입형 소자, portable 및 투명 유연 전자소자 등의 다양한 미래 융합 나노 소자 및 시스템에 광범위한 활용이 가능하며, 향후 신기능의 소자/부품/시스템 창출을 위한 기술로 자리매김할 것으로 전망된다. 본고에서는 압전 나노선, 나노튜브, 나노섬유 등의 1차원적 나노구조체 기반의 nanopiezotronics 기술과 최근의 연구결과들을 소개한다.

• Polymer(Korea)
• /
• v.33 no.3
• /
• pp.219-223
• /
• 2009

The nanofibers fabricated by using an electrohydrodynamic process has been used as various applications, such as nano-device, filtering system, protective clothes, wound dressing, and drug delivery system (DDS). Of these applications, the DDS should be needed to minimize side effects of drugs, maximize the properties of medicine, and efficiently deliver the required amount of drugs to the diseased area. In this paper, by using the electro spinning process, which is one of electrohydrodynamic processes, two different types, polycarprolactone and poly(ethylene oxide)/Rhodamine B, of electrospun mats were fabricated layer by layer and the release behavior of Rhodamine B was characterized with time. In addition, to show the feasibility of DDS of this type, we tested release behavior of a peptide of the nanofiber system, a PCL/(Peptide+PEO)/PCL nanofiber mat. The released peptide did not loss biological activities. From these results, we believe that the layered nanofiber mat as a DDS has enough function of a new drug delivery system.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.99.2-99.2
• /
• 2016

본 발표에서는 공중에 떠있는 그래핀 기반 나노전기역학 시스템 (NEMS)의 기본 물성과 응용 방법에 대해 소개하고자 한다. 단겹 그래핀을 리본형태로 패턴하고 마이크로 전사기술을 통해 공중에 띄우는 공정을 이용한 그래핀 NEMS 소자 제작 방법을 먼저 소개하고 우리 연구그룹에서 지금까지 측정한 이 구조의 기본 역학적 물성 연구 결과를 소개한다. 미세 질량이 공중에 매달린 그래핀에 더해짐에 따라 역학적 공명 주파수가 줄어드는 현상을 이용하여 그래핀 기반 초미세 질량 센서 응용 방법에 대해 먼저 말하고 이후 같은 구조로 역학적 공명주파수를 이용한 RF 소자 응용 가능성에 대해서 이야기 하고자 한다. 마지막으로 다시 같은 구조를 통해 그래핀 자체에서 강한 가시광선이 발광되는 현상을 처음으로 발견한 내용에 대해 소개하고 이 현상에 대한 물리적 분석과 함께 응용 가능성을 제안하며 발표를 마무리하고자 한다.

• Membrane Journal
• /
• v.33 no.2
• /
• pp.53-60
• /
• 2023

Mechanical energy can be harvested by triboelectric nanogenerators (TENG) from biological and environmental systems. In wearable electronics, TENG has a lot of significance as biomechanical energy can be harvested from the motion of humans, which is applied in vibrational sensors. Wearable TENG is prone to moisture and polytetrafluoroethylene (PTFE) is an excellent hydrophobic material used in these applications. The presence of highly electronegative fluorine atoms leads to very low surface energy. At the same time, the performance of the device increases due to the efficient capture of the electrons on the microporous membrane surface. This similar behavior occurs with polyvinylidene fluoride (PVDF) due to the presence of fluoride atoms, which is relatively less as compared to PTFE.

• Polymer(Korea)
• /
• v.31 no.3
• /
• pp.215-220
• /
• 2007

The control of the surface energy by electrohydrodynamic force provides electrospraying with various potential advantages such as simple particle size control, mono-dispersity, high recovery, and mild processing conditions. The advantages are quite helpful to improve the stability of protein drug and control its release. Herein, the nano-encapsulation of protein drugs using electrospraying was investigated. Albumin as a model protein was processed using uniaxial and co-axial electrospraying, and chitosan, polycaporlactone (PCL), and poly (ethylene glycol) (PEG) were used as encapsulation materials. The major processing parameters such as the conductivity of spraying liquids, flow rate, the distance of electrical potential gradient, etc were measured to obtain the maximum efficiency. In the chitosan systems, mean particles size decreases as flow rate and the distance between nozzle and the collecting part decreases. In the uniaxial technique of the PCL systems, mean particles size decreases as flow rate decreases. In the coaxial technique of the PCL systems, it was found that the particles size gets larger under the application of the higher ratio of inner-to-outer liquid flow rates. The primary particles formed out of an electrospraying nozzle showed narrow particle size distribution, but once they arrived to the collecting part, aggregation behavior was observed obviously. Efficient nano-encapsulation of albumin with PCL, PEG, and chitosan was conveniently achieved using electrospraying at above 12 kV.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.4
• /
• pp.191-197
• /
• 2021

To calculate the induced charge of atoms in molecular dynamics, linear equations for the induced charges need to be solved. As induced charges are determined at each time step, the process involves considerable computational costs. Hence, an efficient method for calculating the induced charge distribution is required when analyzing large systems. This paper introduces the Uzawa method for solving saddle point problems, which occur in linear systems, for the solution of the Lagrange equation with constraints. We apply the accelerated Uzawa algorithm, which reduces computational costs noticeably using the Schur complement and preconditioned conjugate gradient methods, in order to overcome the drawback of the Uzawa parameter, which affects the convergence speed, and increase the efficiency of the matrix operation. Numerical models of molecular dynamics in which two gold nanoparticles are placed under external electric fields reveal that the proposed method provides improved results in terms of both convergence and efficiency. The computational cost was reduced by approximately 1/10 compared to that for the Gaussian elimination method, and fast convergence of the conjugate gradient, as compared to the basic Uzawa method, was verified.