• Journal of Korean Tunnelling and Underground Space Association
• /
• v.12 no.3
• /
• pp.215-222
• /
• 2010

An experimental study was carried out on a reduced scale model tunnel to investigate the efficiency of disaster prevention at underground and ground ventilation equipments for the fire in road tunnels. Based on Froude modeling, the 1/50 scaled model tunnel (20 m long) was manufactured. The vertical shafts that are used in the analysis of efficiency of disaster prevention are the two models that had considered when the real tunnels are designed and the amounts of smoke exhaust are applied the miniature of the real tunnels' smoke exhaust, 560 and $280\;m^3/s$. As the result of analysis, it is the possible the emissions of the entire quantity of CO gas through the vertical shafts. In the ground ventilation equipments, the concentration of CO is discharged 2.23~2,73 ppm smaller than the underground ventilation equipments. And the temperature rise in the ground ventilation equipments is $0.53{\sim}0.94^{\circ}C$ lower than in the underground ventilation equipments because of a cooling effect of the surface of the tunnel wall. As a result of analysis of CO concentration and the temperature rise in the modeling ventilation equipment, the position of ground ventilation equipment is more effective than the underground ventilation equipment in disaster prevention measures.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.3
• /
• pp.161-168
• /
• 2023

Converter slag is a by-product generated by refining the pig iron produced into molten steel in the blast furnace, occupying about 15 % of the weight of steel production. It has a high free-CaO content that can generate expansion cracks when used for concrete aggregate. This is the main reason to make it difficult to recycle. To solve this problem, government guideline requires that converter slag has to be aged in an open yard for 90 days. However, aging can not be perfectly performed because it entails time and cost. In this study, we tried to investigate the applicability of converter slag as a cementitious material rather than an aggregate by mixing converter slag with mortar formulations. According to the EDS results of the converter slag in the experiment, we found that screening in the aggregate phase was more effective than that in the powder phase. When the particles separated by a magnet in the aggregate state were pulverized and used for concrete up to a 15 % replacement ratio, various engineering characteristics, such as flow, length change, and compressive strength, showed engineering characteristics similar to those of the control mix.

• Journal of Korean Clinical Nursing Research
• /
• v.29 no.3
• /
• pp.312-326
• /
• 2023

Purpose: This study attempted to analyze the staffing level and critical care nursing fees of intensive care units at tertiary and general hospitals and to provide a professional judgment-based recommendation on staffing level and critical care nursing fee schedules. Methods: Staffing grades and critical care nursing fee schedules for the first quarter of 2017~2020 and the fourth quarter of 2020~2022 were analyzed. A survey was conducted on nursing managers and nurses about the current and appropriate staffing levels. A total of 77 nurse managers and 708 nurses working in Intensive Care Unit(ICU)s at tertiary and general hospitals participated in the study. Results: Grade 1 staffing increased from 25.6% in 2017 to 92.1% in 2022 at tertiary hospitals and from 0.8% in 2017 to 28.4% in 2022 at general hospitals. The current staffing ratios of tertiary and general hospitals were 1:2.21 and 1:2.77, respectively. The appropriate staffing ratio according to nurse managers and nurses was 1:1.00 in patients with more than a ventilator application and 1:2.00 in patients without any ventilator application in tertiary hospitals, and it was 1:1.25 in patients with more than a ventilator application and 1:2.00 in patients without any ventilator application in general hospitals, respectively. Conclusion: The appropriate staffing level was suggested from 1:1.0 to 1:2.0. The new nursing fee schedules were suggested from 1:1.0 (Grade 1) to 1:3.0 (Grade 5) and recommended to be paid based on the staffing grade, minimum number of nurses, and standard annual working days. It is expected to increase staffing levels and provide a better nursing work environment.

• Korean Journal of Ecology and Environment
• /
• v.56 no.4
• /
• pp.375-383
• /
• 2023

To determine the cause of the population decline in Gobiobotia naktongensis, substrate preference and burying behaviour were investigated in this study. In general, the species was shown to prefer a substrate size of 1 mm or less, depending on the flow. In addition, the burying depth varied according to the size of the fish and increased with a decrease in water temperature. Our findings showed that the main cause of the population reduction was the physical changes in the substrate structure due to the dams or barrages construction. Notably, the accumulation of silt and mud in the substrate upon the formation of an upstream lentic water region for structural construction and bed armouring caused by scouring and reduced downstream inflow of fine sediment were deterministic in the fish habitat changes, causing problems in burying. As sand substrate structure is critical for the survival and inhabitation of psammophilous species, efficient strategies should be developed with proper habitat management to reduce the anthropogenic damage

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.980-991
• /
• 2023

To prevent accidents near the quay caused by a ship, ports are generally designed and constructed through navigation and berthing safety assessment. However, unpredictable accidents such as ship collisions with the quay or personal accidents caused by ropes still occur sometimes during the ship berthing or mooring process. Automatic mooring systems, which are equipped with an attachment mechanism composed of robotic manipulators and vacuum pads, are designed for rapid and safe mooring of ships. This paper deals with a displacement and velocity measurement system for the automatic mooring device, which is essential for the position and speed control of the vacuum pads. To design a suitable system for an automatic mooring device, we first analyze the sensor's performance and outdoor environmental characteristics. Based on the analysis results, we describe the configuration and design methods of a displacement and velocity measurement system for application in outdoor environments. Additionally, several algorithms for detecting the sensor's state and estimating a ship's velocity are developed. The proposed method is verified through some experiments for displacement and speed measurement targeted at a moving object with constant speed.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.6
• /
• pp.781-789
• /
• 2023

We investigated the sensory and quality characteristics of gambas al ajillo retort foods with nondigestible maltodextrin (trial gambas) compared with commercially available frozen gambas al ajillo (control). Trial gambas demonstrated approximate compositions of 75.8% moisture, 11.3% protein, 5.8% lipid, 1.7% ash, and 5.4% carbohydrates, indicating lower lipid and carbohydrate contents but higher moisture, protein, and ash levels than that of the control. Sensory assessments conclusively established the superior overall acceptability of trial gambas over the control. Trial gambas exhibited a total amino acid content of 9.62 g/ 100 g, surpassing the 5.39 g of the control. The major amino acids, such as lysine, leucine, arginine, aspartic acid, and glutamic acid, contributed significantly to its enhanced nutritional profile. Mineral analysis revealed higher calcium, phosphorus, magnesium, and iron levels in trial gambas and lower potassium levels than that in the control. Fatty acid profiling identified 18:1n-9 (67.8%) and 16:0 (11.9%) as the predominant fatty acids, in concordance with the control. This study substantiates trial gambas with the health-oriented preferences of the MZ generation while presenting superior sensory and quality attributes compared with the control.

• Journal of Korean Society of Forest Science
• /
• v.112 no.4
• /
• pp.442-450
• /
• 2023

This study sought to determine the desiccation tolerance and storage behavior of Sarcandra glabra seeds to assist in the establishment of an ex-situ conservation strategy for the species. The basic germination characteristics of S. glabra seeds were investigated. Subsequently, the seeds were dried to various desiccation levels to allow for analysis of their germination characteristics and seed integrity. In addition, the seeds were subjected to germination tests after being stored for different durations. The initial seed moisture content following the removal of the fleshy fruit was 32.8%, and the fresh seeds maintained their seed viability even after a decrease in the seed moisture content to 4.8%, while the germination percentage was 81.0%. The germination percentage of the seeds decreased to 55.0% and 30.0% when they were desiccated to moisture contents of 2.3% and 2.2%, respectively. By contrast, when the stored seeds were desiccated, they maintained their seed viability and vigor at a moisture content of 18.6%; however, when the moisture content decreased below 5.0%, both the seed viability and vigor significantly declined and the germination percentage fell below 20.0%. Furthermore, analysis of the seed leachate revealed that the decrease in the seed viability and vigor was associated with both increased electrical conductivity and increased concentrations of inorganic compounds such as potassium and calcium. In conclusion, the findings of this study show S. glabra seeds to possess desiccation tolerance that falls somewhere between the recalcitrant and intermediate seed types, with the observed variations depending on the degree of deterioration.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.6
• /
• pp.704-711
• /
• 2023

This paper discusses the control method of BLDC(Brushless Direct Current) motor that has similar electrical characteristics with DC motor but has improved its lifespan and reliability. The BLDC motor can improve durability and speed stability by using rotor position information to eliminate commutators that require mechanical contact with DC motors. In this study, a controller for a DC motor was designed based on the fact that the current in the windings of a BLDC motor is a square-wave current like the current flowing in the armature of a DC motor. Next, the designed controller was applied to a 3-phase BLDC motor to confirm the effectiveness of the controller. In detail, a single-phase DC motor with electrical parameter values of a three-phase BLDC motor was modeled and a PI controller for motor speed control was designed by applying the root locus method to the derived system. The speed control simulation of the DC motor was performed to confirm the validity of the controller, and the same controller was applied to the speed control of the 3-phase BLDC motor implemented in MATLAB. From the simulation, similar results of the DC motor were obtained in the 3 phase BLDC motor and confirmed the usefulness of the proposed control scheme.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.6
• /
• pp.479-493
• /
• 2023

The need for safety management has arisen due to the increasing number of years of operated underground structures, such as tunnels and utility tunnels, and accidents caused by those aging infrastructures. However, in the case of privately managed underground utility ducts, there is a lack of detailed guidelines for facility safety and maintenance, resulting in inadequate safety management. Furthermore, the absence of basic design information and the limited space for safety assessments make applying currently used non-destructive testing methods challenging. Therefore, this study suggests non-destructive inspection methods using ultrasonic and impact-echo techniques to assess the quality of underground structures. Thickness, presence of rebars, depth of rebars, and the presence and depth of internal defects are assessed to provide fundamental data for the safety assessment of box-type general underground structures. To validate the proposed methodology, different conditions of concrete specimens are designed and cured to simulate actual field conditions. Applying ultrasonic and impact signals and collecting data through multi-channel accelerometers determine the thickness of the simulated specimens, the depth of embedded rebar, and the extent of defects. The predicted results are well agreed upon compared with actual measurements. The proposed methodology is expected to contribute to developing safety diagnostic methods applicable to general underground structures in practical field conditions.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.1
• /
• pp.82-93
• /
• 2024

Since the cement industry generates more than 60 % of CO₂ during the clinker production process, supplementary cementitious materials are used worldwide to reduce CO₂ efficiently. Mainly used supplementary cementitious materials such as blast furnace slag and fly ash, which are used in various industries including the cement industry, concrete admixtures, and ground solidification materials. However, since their availability is expected to decrease in the future according to the carbon neutrality strategy of each industry, new supplementary cementitious materials should be used to achieve the cement industry's goal for increasing the additive content of Portland cement. Limestone is a material that already has a large amount in the cement industry and has the advantage of high grinding efficiency, so overseas developed countries established Portland limestone cement standards and succeeded in commercialization. This study was an experimental study conducted to evaluate the possibility of utilizing domestic PLC, the effect of fineness and replacement ratio on the physical properties of cement was investigated, and the environmental impact of cement was evaluated by analyzing CO₂ emissions.