• Proceedings of the Korea Concrete Institute Conference
• /
• 1994.04a
• /
• pp.254-259
• /
• 1994

Recycling of waste concrete will contribute not only to the solution of a growing waste disposal problem, also help to conserve natural resources of aggregate and to secure future supply of reasonably priced aggregates for building construction purpose within large urban areas. But there recycled aggregates are more porous and less resistant to mechanical actions. In comparison with natural aggrete concrete, recycled aggregate concrete shows reductions in strength and other engineering properties. And it may also be less durable due to increase in porosity and permeability. Economical ways of improving the quality of recycled aggregate concrete are: (1)by reducing the water-cement ratio; (2)by reducing the water content using a superplasticizer without affecting the workability; (3)addition of pozzolan, such as fly ash; and (4)blending of recycled aggregate with the natural aggretes.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.35-38
• /
• 2012

Spacers which we have studied is the secondary product of the concrete to apply on concrete structure. It is needed to secure equal or greater performance than structural concrete that it is applied. There is a tendency that concrete structures are strengthened more and more. Therefore, designed set up position of reinforcement is used more and more, so it is needed increasingly high strength spacer. We have been doing a series of research to develop the different typed high strength spacer having crack resistance during constructing. The bearing load of different type spacer shows approximately 35% lower load than those in the general spacers.

• Korean Chemical Engineering Research
• /
• v.44 no.3
• /
• pp.289-293
• /
• 2006

In the CMSMPR (continuous mixed suspension mixed product removal)system, the effect of temperature and RPM on the CSD (crystal size distribution) in the calcium carbonate process was investigated. In the steady state operation, the change of solution pH was small. At the low temperature and below 300 RPM, volume mean size change of calcium carbonate was stable and CSD was narrow. In the SEM view, calcite and aragonite was obtained.

• Proceedings of the KSCN Conference
• /
• 2005.10a
• /
• pp.72-72
• /
• 2005

• Journal of the KSME
• /
• v.31 no.3
• /
• pp.293-299
• /
• 1991

단섬유보강 금속복합재료의 2차가공은 금속복합재료의 넓은 범위 응용을 위해 필히 요구된다. 여러 가공방법 중 하나인 열간압출시 보강섬유파괴 및 계면에서의 접합분리 및 균열발생이 없는 제조공정의 최적화를 위해서 가공시 내부조직의 소성변형 기구 규명보다 압출력에 의한 응력분 포와 기지재료와 보강섬유 사이 계면 변화 및 기계적 특성 관계규명이 정량적으로 요구된다. 본 글에서는 유한요소법을 이용하여 계면에서의 접합상태를 임의로 가정하여 압출조건에 따른 압 출후의 보강섬유 방향 및 계면균열 및 접합분리를 거시적으로 예측하고, advanced shear-lag을 이용하여 균열 전, 후의 응력. 변형관계를 미시적으로 규명할 수 있음을 제시하였다. 그러나 향후 현상적 모델인 shear-lag 모델을 수학적 모델인 균질화법에 도입하면 미시적. 거시적 거 동해석이 함께 요구되는 금속복합재료의 열간압출거동 해석을 일체적으로 행할 수 있어 효율적 이고 정확한 예측이 가능하리라고 사료된다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.1
• /
• pp.9-16
• /
• 2002

The particles velocity in the instantaneous flow field and velocity change of particles along the jet centerline for various particle diameter in a circular turbulent impingement jet are investigated by using particle image velocimetry(PIV) and an equation of particle motion simplified by terms of inertia forces, drag and gravitational force. The jet Reynolds number was 3300 and 8700, and glass beads of 30,58 and 100$\mu$m in diameter were used. The PIV results show that the direction and size of velocity depends not only on the number density of particle but also on the particle momentum. The results obtained form calculation suggest that the particle velocity near the first impingement region deviated from local air velocity, which accords well with the PIV results. The rebound height of particle increase with the particle diameter. In the second-impingement, particle velocities increased sluggishly with Re=3300 but particle velocities uniformed with Re=8700 in stagnation region.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.112-116
• /
• 2007

Highly damped insulation panel for transformer construction is needed in residential area because the making noise from transformer substation in inner city is appeared a lost of problem by increasing to conserve living environment. Therefor in this paper, the vibration and noise characteristic effect of cork-type and sponge-type that is attached between insulation panel and enforce beam in transformer is analized using real size transformer experimentally.

• Proceedings of the Korea Society of Poultry Science Conference
• /
• 2004.11a
• /
• pp.19-20
• /
• 2004

본 연구는 1세포기 닭 수정란에서 외래 표지유전자(EGFP)와 리포좀(liposome)을 사용하여 외래유전자의 핵 전이의 효율성을 검증하고자 하였다. 실험은 리포좀과 혼합된 표지유전자와 naked 유전자 두 그룹으로 나누고, 유전자 미세 주입방법을 이용하여 배반엽 단계(stage X)와 1세포기 수정란의 세포질에 미세 주입하고 지속적으로 배양하면서 GFP의 발현 양상들을 관찰하였다. 실험결과, 배반엽 단계와 1세포기 수정란 모두에서 리포좀과 외래 유전자의 혼합물을 미세 주입한 경우 일주일 정도 지속적으로 GFP가 발현되었으나, 외래 유전자만을 주입한 경우 GFP의 발현이 관찰되지 않았다. 본 연구결과는 리포좀이 효율적으로 외래 유전자를 닭 수정란의 핵으로 이동시킴을 보여주고 있다.

• The Korean Journal of Applied Statistics
• /
• v.14 no.1
• /
• pp.59-70
• /
• 2001

이면교배 실험은 식물이나 동물의 교배를 통해 자식계통의 유전적인 성질을 조사하는데 중용한 역할을 한다. 이면교배에 관한 기존의 연구에서는 p개의 자식계통은 하나의 집합에 속하는 것으로 간주하였다. 이와 달리 새로 육성된 자식계통의 유전적 성질을 평가하고자 하는 경우에는, p개의 자식계통이 각각 p$_1$과 p$_2$개의 자식계통을 갖는 두 개의 집합으로 분리되는 형태의 교배실험을 사용한다(단, p=p$_1$+p$_2$). 이에 본 연구에서는 자식계통이 두 집단으로 분리된 경우에 대해서 Kempthorne의 합동식을 이용하여 두 군간 교배에 대한 블록디자인을 설계하고, 이에 대한 평균효율인자를 계산하는 방법을 제안하고자 한다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.111-115
• /
• 2003

Nanoindentation is simply an indentation test in which the length scale of the penetration is measured in nanometres rather than microns or millimetres, the latter being common in conventional hardness tests. Three-dimensional molecular dynamics simulations have been conducted to evaluate the nanoindentation test. Molecular dynamics simulations were carried out on single crystal copper by varying crystal orientations to investigate nano-behavior of material beneath an indenter in nanoindentation. Morse potential function was used as an interatomic force between indenter and thin film. The result of the simulation shows that crystal orientation significantly influenced the slip system, dislocation nucleation and dislocation behavior.