• Journal of the Korean Chemical Society
• /
• v.21 no.2
• /
• pp.139-148
• /
• 1977

The rate of oxime formation of 2-furfural and 5-substituted-2-furfurals such as 5-methyl-2-furfural, 5-isopropyl-2-furfural, 5-tert-butyl-2-furfural, 5-isoamyl-2-furfural and 5-nitro-2-furfural have been measured at 15∼$45^{\circ}C$ in aqueous solution buffered at pH 7. Oxime formation for all the compounds investigated is second-order reaction and their activation energies observed are 5.50, 7.22, 7.03, 7.49, 7.78 and 4.97 kcal/mole, respectively. Hammett equation is obtained for 5-alkyl-2-furfurals and the reaction constants (${\rho}$) calculated at 15, 25, 35 and $45^{\circ}C$ are 2.010, 1.756, 1.541, and 1.311 respectively.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2015.11a
• /
• pp.203-206
• /
• 2015

본 논문은 4K UHD 입력 영상에 대한 HEVC 고속 부호화를 위하여 대부분의 상용 CPU 및 AP 에서 사용되고 있는 SIMD (Single Instruction Mutiple Data) 명령어를 사용한 고속의 정수 화소 단위 움직임 추정 방법에 대한 연구이다. 특히, IT 기기에서의 고속 동영상 부호화를 위해 기존의 SIMD 명령어를 개량하여 동일한 CPU 실행시간에 다수의 움직임 추정을 수행할 수 있는 SIMD 명령어를 사용하여 보다 같은 실행시간에 보다 넓은 영역에 대한 움직임 벡터 탐색을 수행할 수 있도록 Search Box 기법을 새로이 개발하고 이를 토대로 기존 HEVC 에서 사용되고 있는 움직임 추정 방법에 대하여 연산시간을 줄이는 동시에 화질 열화를 최소화 시킬 수 있는 방법에 대하여 논한다.

• Journal of the Korean Geotechnical Society
• /
• v.18 no.5
• /
• pp.133-141
• /
• 2002

Isotropic rock and anisotropic rock have different tensile strength which has the greatest influence on rock failure. In this study, elastic modulus of anisotropic rock is obtained through uniaxial compression test, and tensile strength and tension failure behavior are analyzed through indirect tensile strength test. Stress concentration factor of a specimen at the center is obtained from anisotropic elastic modulus and strain by indirect tensile strength test. Theoretical solutions for tensile strength of isotropic and anisotropic rock are compared. Stress concentration factor of anisotropic rock is either higher or lower than isotropic rock depending on the inclination angle of bedding plane. The use of stress concentration factor of isotropic rock resulted in overestimation or underestimation of tensile strength.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12C
• /
• pp.1039-1045
• /
• 2008

The H.264/AVC video coding standard shows extremely higher coding efficiency, but it causes high computational complexity. Especially, the intra mode decision using the rate-distortion method requires many computations. Thus, the efficient intra mode decision methods have been proposed by decreasing the encoding complexity. In this paper, we propose an efficient intra mode decision algorithm using $4{\times}4$ integer transform coefficients in the conversion of MPEG-2 to H.264 standard. It is shown that the proposed algorithm reduces encoding time and complexity compared to the conventional algorithm, while showing similar PSNR performance.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.4
• /
• pp.737-744
• /
• 2018

The RSA cryptosystem is a one of the first public-key cryptosystems and is widely used for secure data transmission and electric signature. The security of the RSA cryptosystem is based on the difficulty of factoring large numbers.. Though many studies on finding methods for factoring large numbers are going on, the results of that are all experimental or probabilistic. We, in this paper, construct an algorithm for finding large prime factors of integers without factoring integers using properties of the structure of semigroup of imaginary quadratic order and non-invertible ideal, then propose our methods foe deterministic attack against RSA cryptosystem.

• Journal of the Korean Data and Information Science Society
• /
• v.25 no.6
• /
• pp.1467-1474
• /
• 2014

In this paper, we consider the two computer intensive methods for extended Euclidean algdrithm. Two methods we propose are C-programming based approach and Microsoft excel based method, respectively. Thses methods are applied to the derivation of greatest commnon devisor, multiplicative inverse for modular operation and the solution of diophantine equation. Concrete investigation for extended Euclidean algorithm with the computer intensive process is given. For the application of extended Euclidean algorithm, we consider the RSA encrytion method which is still popular recently.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.7
• /
• pp.179-184
• /
• 2004

In this work, a copper-clad aluminum composite was fabricated using hot hydrostatic extrusion with various extrusion ratios (8.5, 19, 49) and semi-die angles (30, 45, 60 degree) at a temperature of 32$0^{\circ}C$, Material characteristics of copper-clad aluminum composites were determined from compression tests and hardness tests The results showed that for ER of 8.5, the optimum semi-die angle was below or equal to 30 degree and a pressure drop was about 31%. For ER of 19, the optimum semi-die angle was in the range of 40 to 50 degree and a pressure drop was about 38%. In the case of ER=49, the optimum semi-die angle was above or equal to 60 degree and a pressure drop was about 36%. Compressive yield strength was maximum for ER of 8.5 and semi-die angle of 30 degree and the value of maximum was 155 MPa. Uniform hardness distribution was obtained as the extrusion ratio increases and the semi-die angle decreases. In the case of ER=8.5 and semi-die angle of 30 degree, the lowest extrusion pressure and the maximum compressive yield strength was obtained. Therefor, it was concluded that the optimum extrusion condition for fabricated copper-clad aluminum composites under hydrostatic pressure environment was ER of 19 and semi-die angle of 30 degree.

• Journal of Korean Society of Water and Wastewater
• /
• v.35 no.5
• /
• pp.351-365
• /
• 2021

Water treatment process simulator is the tool for predicting sequential changes of water quality in a train of unit processes. This predicts the changes through governing equations that represent physicochemical performance of each unit processes with an initial and boundary conditions. Since there is no operational data for the design of a water treatment facility, there is no choice but to predict the performance of the facility by assuming initial and boundary conditions in virtual reality. Therefore, a simulator that can be applied in the design stage of a water treatment facility has no choice but to be built as a numerical analysis model of a deductive technique. In this study, we had conducted basic research on governing equations, inter-process data-flow, and simulator algorithms for the development of simulators. Lastly, this study will contribute to design engineering tool development research in the future by establishing the water treatment theory so that it can be programmed in a virtual world and suggesting a method for digital transformation of the water treatment process.

• Smart Media Journal
• /
• v.12 no.2
• /
• pp.15-26
• /
• 2023

Due to the global COVID-19 pandemic, which has led to a shift towards remote work, the frequency of external access to important internal resources by companies has increased exponentially, exposing them to various security threats. In order to address these access security issues, ZTA (Zero Trust Architecture) has gained attention. ZTA operates on the principle of not trusting external or internal users, and manages access authentication and authorization strictly according to pre-established policies. This paper analyzes the definition of ZTA and key research trends, and summarizes different ZTA solutions for each company.

• Journal of Navigation and Port Research
• /
• v.32 no.5
• /
• pp.349-353
• /
• 2008

In this paper, the EM wave absorber was designed and fabricated for preventing Reader Interference of RFID communication system in UHF band We fabricated several samples in different composition ratios of Amorphous and CPE(Chlorinated Polyethylene). Absorption abilities were simulated in accordance with different thicknesses of the prepared absorbers and changed complex relative permittivity and permeability due to composition ratio. The mixing ratio of Amorphous and CPE was searched as 80 : 20 wt.% by experiments and simulation. Then the EM wave absorber was fabricated and tested using the simulated data. As a result, the developed EM wave absorber has a thickness of 4 mm and absorption ability was over 20 dB in frequency range of $860\;MHz{\sim}960\;MHz$. Therefore, it was confirmed that the developed absorber can be used for suppressing RFID reader interference in UHF band.