Objectives : This study evaluated activities and ingredient contents concerning extracts according to extraction solvents of Insampaedok-san (IS, Renshen bai du-san). Methods : The herbal constituents of IS were extracted with water and 70% ethanol at $100^{\circ}C$ for 2 hr. Using the HPLC system, the six ingredient contents of different solvent extracts of IS were analyzed. The nitric oxide (NO), prostaglandin $E_2$ ($PGE_2$) production and proinflammatory cytokines were measured in RAW264.7 cells stimulated with lipopolysaccharide (LPS). The macrophage-derived chemokine (MDC/CCL22) and regulated on activation normal T-cell expression and secreted (RANTES/CCL5) production were measured in HaCaT and BEAS-2B cells stimulated tumor necrosis factor-${\alpha}$ (TNF-${\alpha}$) and interferon-${\gamma}$ (IFN-${\gamma}$). The activities of glycerol-3-phosphate dehydrogenase (GPDH) and leptin level were measured in 3T3-L1 cells. Results : The calibration curves showed good linearity ($r^2$=1.0000) for different concentration ranges. The contents of liquiritin, naringin, hesperidin, neohesperirin and glycyrrizin in 70% ethanol extracts of IS were relatively higher than that of water extract, however the content of ferulic acid in 70% ethanol and water extract of IS were similar. The extraction solvents of water and 70% ethanol were evaluated inhibitory effect on the production of NO, $PGE_2$, TNF-${\alpha}$ and IL-6 in RAW 264.7 cells. Their extractions were inhibitory effect on production of MDC/CCL22 and RANTES/CCL5 in HaCaT cell and BEAS-2B cell, respectively. In addition, evaluated reduced on GPDH activity and leptin level in 3T3-L1 preadipocyte cell. Conclusions : Our results suggest that IS extracts were inhibitory effects of disease such as inflammation, allergies and obesity.
A polypropylene fraction collected from the stream of post-consumer plastics was pyrolyzed. The aim of this study is to observe the dependence of yield of BTEX-aromatics normally used as solvent on the reaction temperature. To reach the goal, three experiments were carried out at different temperature between 650 and $700^{\circ}C$, using a fluidized bed reactor that shows an excellent heat transfer. In the experiments, product gases were used as a fluidizing medium to maximize the amount of BTEX-aromatics at fixed flow rate and feed rate during the pyrolysis. Oil, gas and char were obtained as product fractions. Product gases were analyzed with GCs(TCD, FID) and with a GC-MS system for qualitative analysis. For an accurate analysis of product oil, the product oil was distilled under vacuum, and separated the distillation residues from oil fractions that were actually analyzed with a GC-MS system. As the reaction temperature went higher, the content of BTEX-aromatics increased. The maximal yield of BTEX-aromatics was obtained at $695^{\circ}C$ with a value of about 30%. The main compounds of product gas were $CH_4$, $C_2H_4$, $C_2H_6$, $C_3H_6$, $C_4H_{10}$ and the product gas had an higher heating value about 45MJ/kg. It could be used as a heat source for a pyrolysis plant or for other fuel applications.
Hong, Du-Ho;Seo, Hwa-Jeong;Kang, Kyoung-Hee;Kim, Eun-Ju;Im, Jeong-Soo;Oh, Dae-Kyu;Yim, Jun
Journal of agricultural medicine and community health
/
v.33
no.3
/
pp.316-323
/
2008
= ABSTRACT =
Objectives : Incheon metropolitan city has set a model program of community partnership for hypertensive or diabetic patients detection and follow-up since 2005. This study examines the effects of the model on the compliance and the control of blood pressure or blood sugar level
Methods : Telephone-surveys were done for 140 persons selected from 408 patients who were detected newly as hypertensive or diabetic patients at Gangwha-Gun and Seo-Gu in Incheon between January 1st and August 31th in 2006, and finally completed in 110 patients(78.6%). Survey questionnaires included socio-demographic(age, gender,
and educational level), health behavioral (smoking, drinking, physical activity, and diet), and therapy-related (registration state, compliance, blood pressure or blood sugar control) variables. Odds ratio and 95% CI were derived from logistic regression model.
Results : Registered group exhibited high compliance and well managed blood pressure or blood sugar level. The odds ratio of registration were 5.55(95% CI:1.83~16.89) for compliance and 3.78(95% CI:1.43~9.99) for blood pressure or blood sugar control after adjusting for age, gender, disease, and area Conclusions : It is independently related to compliance and blood pressure or blood sugar control whether the patient is registered or not. To control hypertension or diabetes mellitus in terms of compliance and
control state, a community-based registration program through community partnership could be a powerful tool.
Kim, Byeong-Kwon;Lim, Jae-Woo;Chang, Yoon-Young;Yang, Jae-Kyu
Journal of Soil and Groundwater Environment
/
v.13
no.2
/
pp.62-69
/
2008
In this study physicochemical characteristics and stability of various manganese coated sands (MCS) prepared with different methods were evaluated. In addition, removal efficiencies of As(III) by each MCS were compared. Four different MCSs were used; B-MCS prepared by baking method, W&D-MCS prepared by wetting and dry method, NMCS prepared during the water treatment process and Birm which is a commercial MCS widely used for the removal iron and manganese. The manganese content in each MCS was following order: Birm (63,120 mg/kg) > N-MCS (10,400 mg/kg) >W&D-MCS (5,080 mg/kg) > B-MCS (2,220 mg/kg). Birm showed the least solubility (% basis) in acidic conditions. As(III) oxidation efficiency of B-MCS was continuously increased as the solution pH decreased. While As(III) oxidation efficiency of N-MCS and Birm was minimum around neutral pH. The increased As(III) oxidation efficiency above neutral pH for N-MCS and Birm could be due to the competitive adsorption of $Mn^{2+}$, which was produced from reduction of $MnO_2$, onto the surface of aluminum and manganese oxides.
An internal friction angle, which is one of strength parameters of granular soils, can be obtained from direct shear tests or triaxial tests. The result of traixial tests can be influenced by various experimental conditions such as confining pressure, shearing rate, specimen diameter and height, and end constraint. In this study, undrained and drained shearing behaviors of Nakdong River sand were investigated for loose (Dr = 40%) and dense (Dr = 80%) specimens with 5, 7, and 10 cm in diameter. Friction angles such as undrained total stress friction angle, undrained effective stress friction angle, and drained friction angle obtained from Mohr's stress circle slightly increased and then decreased as a diameter of a specimen increased from 5, 7 to 10 cm, regardless of relative densities. The difference between friction angles caused by different specimen size was at maximum 4.5 degrees for undrained total stress friction angle of dense specimen. In most cases, there was little difference between friction angles of large and small specimens, which was less than 2 degrees. The difference between an effective friction angle from undrained tests and a drained friction angle from drained tests was at maximum 7 degrees for loose samples but negligible for dense samples.
In this study, ecological characteristics of Zacco platypus population in Lake Hoengseong region, including the up-and downstream in Lake, were investigated from April to November, 2010. The results compared with regional dynamics of Z. platypus population showed a dominant population among the other fish population, and also upstream has relatively high as 1,707 (78.70%) individuals than those of other sites. The regression coefficient (b) in relation to length-weight on Z. platypus population were 3.28 which appeared relatively a stabilized habitat condition in Lake Hoengseong region and 3.28 at the upstream and 3.10 in Lake Hoengseong and 3.09 at the downstream. Condition factor on Z. platypus population in Lake Hoengseong region showed stabilized population as 0.003 value, and especially the condition factors at the upstream were relatively higher than those at the downstream and Lake Hoengseong, indicate that Z. platypus population at the upstream displayed to be maintained as the most good condition in relation to trophic states. As a results of compared with body size on Z. platypus population, was investgated as highly distribute between 30~50mm and 70~90mm at upstream; 60~80mm in Lake Heongseong; 70~100mm at downstream, respectively. As a results, Z. platypus population at the upstream among Lake Hoengseong region displayed the most stabilized growth condition, and Z. platypus population were inhabitable in lotic and lentic environments based on good habitat condition.
Kim, Chi-Hong;Yoon, Seung-Woon;Kim, Jae-Goo;Kim, Hyun-Tae;Park, Jong-Sung;Park, Jong-Young
Korean Journal of Ichthyology
/
v.24
no.3
/
pp.160-166
/
2012
Egg development and early life history of the endangered Korean freshwater fish, Microphysogobio koreensis, was investigated to get a basic information for establishing its conservation strategy. The matured adult fishes were sampled at Imsil-gun, Jeollabuk-do, Korea in May 1 2012 and artificially fertilized. The fertilized eggs were spherical, separated demersal and $1.8{\pm}0.14mm$ in diameter. The hatching of the embryo began at about 29 hours after fertilization under water temperature of $23^{\circ}C$. The newly hatched pre-larvae were average $2.2{\pm}0.48mm$ in total length. At 4 days after hatching, the post-larvae were $3.6{\pm}0.55mm$ in total length and york sac was completely absorbed. At 20 days after hatching, their fin rays were formed and finally the larvae entered juvenile stage and grew up to $6.5{\pm}0.77mm$ in total length. At 60 days after hatching, the total length reached $24.4{\pm}1.71mm$, and the band patterns of he head and lateral side were similar to adult fish. Based on this study, the fertilized eggs of M. koreensis hatched more quickly and the pre-larvae length was also smaller, compared with related species.
Lee, Dae Jun;Kim, Chang In;Jee, Young Goo;Lee, Kye Young;Kim, Keun Yeol;Choi, Young Hi;Seo, Pil Weon
Tuberculosis and Respiratory Diseases
/
v.44
no.1
/
pp.183-190
/
1997
Tocolytics are agents widely used in the treatment of premature labor to inhibit uterine contractions. Ritodrine is most commonly used tocolytic agent and acts by increasing intracellular cyclic adenosine monophosphate, which decreases the activity of myosin light-chain kinase, the rate-limiting enzyme in the signal network leading to contraction. Physiologic effects associated with the use of ritodrine are due to their effect on bera-l as well as beta-2 receptors. Some of maternal complications of therapy are rachycardia, hyperglycemia, hypokalemia, lactic acidosis, myocardial ischemia, and pulmonary edema. Tocolytics induced pulmonary edema is a serious complication that can lead to marternal death, although infrequent, The incidence varies from 0.5% to 5% of those receiving these agents. Predisposing factors include the concommitant use of corticosteroid, twin gestation, fluid overload (particularly with saline), and anemia. Several mechanisms have been postulated, but the pathogenesis is uncertain. It is suggested that both types of mechanism, hydrostatic and permeability induced, might be involved. The association of tocolytic therapy with pulmonary edema appears to be unique to the pregnant state, because this complication has never been reported in asthmatic patients exposed to high dosages. We report a case of tocolytic induced pulmonary edema developed in 24 hours after delivery.
Kim, Seul-Kee;Kim, Jeong-Hyeon;Lee, Chi-Seung;Kim, Myung-Hyun;Lee, Jae-Myung
Journal of the Computational Structural Engineering Institute of Korea
/
v.28
no.1
/
pp.1-8
/
2015
In this paper, computational evaluation method for fatigue crack growth rate(FCGR) based on material viscoplastic-damage model is proposed. Viscoplastic-damage model expressing material constitutive behavior of 7% nickel steel is introduced and is implemented into commercial finite element analysis(FEA) code, ABAQUS, as a user defined material subroutine(UMAT) for application in the FEA environments. Verification of developed UMAT and material parameters of material model are carried out by uniaxial tensile test simulations of 7% nickel steel. Moreover, jump-in-cycles procedure and rearrangement of critical damage are employed and also implemented to the ABAQUS UMAT for fatigue damage analysis. Typical FCGR test results such as relationship between crack length and number of cycles and relationship between da/dN and ${\Delta}K$ could be obtained from FCGR test simulation using developed UMAT and these results are compared with experimental results in order to verify of proposed computational method.
Recently despite the development of analysis program and construction technologies, collapse at the many earth retaining wall construction site of the structure due to the economic and human damage has occurred. The results of geothechnical investigation studies field, it was found to differ from the results of the original design. There may be errors parameters calculated from the results of ground investigation in such a case. And it can be estimated that it is irrational to behavior analysis of the earth retaining wall were analyzed by utilizing the parameters. And in this study, parameters that affect the earth retaining wall the correlations were analyzed using elasto-plastic method. Analysis method was changed various parameters (cohesion, subgrade reaction coefficient, load condition) applied to the elasto-plastic method. And due to a change in the behavior of earth retaining wall materials were analyzed. As a result, the cohesion greatly affects the behavior of earth retaining wall materials in various parameters. For this reason, the results of the geothechnical investigation, confirmation of the actual ground is very important in the design of the earth retaining wall. And, calculating accurate and reasonable of the cohesion of the various parameters is very important.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.