• Korean Journal of Crystallography
• /
• v.4 no.1
• /
• pp.1-5
• /
• 1993

The crystal structure of N-(2'-chloro-4'-vitrophenyl)-5-chlorosalicylamide( Niclosamide ) monohydrate has been determined from 1976 sig- nificant independent reflections collected on an automated CAD4 diffractometer using graphitemonochromated Mo-Ka radiation. The crystal is monoclinic, space group P211c, with unit cell dimensions, a=11.331 (3), b=16.964(2), c=7.347(4)A , P =98.20(3)° and Z=4 at T=293k. The structure was solved by direct method using seminvariants of ggg Parity group and refined by the full-matrix least-square method, resulting model with reliability factor, R=0.046. The feature of the molecule show planar structure in parallel to the ab crystal plane.

• Restorative Dentistry and Endodontics
• /
• v.19 no.1
• /
• pp.180-193
• /
• 1994

The purpose of this study was to observe the sealing ability and durability of All-Bond 2, Gluma Bonding System, Scotch bond 2 and Superbond D-liner which are dentin bonding agents used as desensitizing agents. The durability of the sealing ability of the materials were compared after 0, 140, 420, 840 tooth brushing strokes. 120 extracted teeth were divided into 5 groups and the agents were applied to the exposed dentin. No agents was applied on group I, the control group. Each specimen went through thermocycling from $5^{\circ}$ to $55^{\circ}C$, 200 times. Each group was devide into 4 subgroups and artificial tooth brushing strokes were done for 0, 140, 420, 840 times. Finally the specimens were stored in 0.5 % methylene blue solution for 24 hours in a incubator set at $37^{\circ}C$. The tooth were sectioned perpendicular to the long axis and the dye penetration ratio to the pulp was measured. The following results were obtained. 1. All four dentin bonding agents initially showed excellent sealing ability. 2. All-bond 2, Gluma Bonding System and Superbond D-liner showed durability of dentinal tubule sealing effect after 840 strokes(6-week) artificial tooth brushing. 3. Scotchbond 2 showed a significant decrease in sealing ability after 420 strokes(3-week) artificial tooth brushing. (P<0.05).

• Bulletin of the Korean Chemical Society
• /
• v.16 no.10
• /
• pp.912-915
• /
• 1995

Ornidazole, C7H10ClN3O3, crystallizes in the triclinic, space group P1^, with a=13.605(2), b=14.054(1), c=8.913(5) Å, α=71.59(2), β=78.73(2), γ=64.86(1)°, μ=3.26 cm-1, Dc=1.499 g/cm3, Dm=1.497g/cm3, F(000)=684, and z=6. Intensities for 2693 unique reflections were measured on a CAD4 diffractometer with graphite-monochromated Mo-Kα radiation. The structure was solved by direct method and refined by block-diagonal least squares to a final R of 0.081 (Rw=0.047) for 1952 reflections with Fo>3σ (Fo). The asymmetric unit contains three independent molecules of the title compound. The bond lengths and bond angles are comparable with the values found in the other nitro-substituted compounds. The nitro groups are rotated (6.9°, 6.6°, 2.6° for the three independent molecule, respectively) about the C-N axes from the imidazole planes. The crystal structures are linked by two intermolecular hydrogen bonds of O-H---N type and one intermolecular hydrogen bond of O-H---O type.

• Korean Journal of Medicinal Crop Science
• /
• v.6 no.3
• /
• pp.198-203
• /
• 1998

This experiment was conducted to determine the effect of different size of divided crowns used as planting material on the growth characteristics, yield and quality of Paeania lactiflora Pallas (P. lactiflora Pallas). The ratio of sprouting, rooting, and growth of above-ground parts increased with the increase of crown size. The root yields of under-ground parts from different size of divided crown were 2,674kg/10a for large size and 2,304kg/10a for medium size and the yield index was improved by 39% and 30%, respectively, compared to 1,921kg/10a in small size. Commodity ratio of roots over 10mm in diameter were higher for large and medium size crown: index increased by 26 % and 11 %, respectively, compared to 1,406kg/10a in small size. Income analyzed by crown size was \ 1,133,000 per 10a at the use of small crown size but income were increased 25 % and 48 %, respectively. by using medium and large size crown as compared with small crown.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11a
• /
• pp.262-264
• /
• 2005

네트워크가 이동하는 환경을 지원하기 위하여 IETF에서는 NEMO(Network Mobility)를 제안하였다. NEMO에서는 이동 네트워크 내부에 이동하는 노드를 가질 수 있기 때문에 이동 네트워크 노드와 이동 네트워크 간의 복잡한 구조로 인하여 중첩되는 라우팅 문제가 발생한다. 이로 인하여 이동 네트워크 환경에서의 라우팅 최적화에 관한 연구가 진행되고 있다. 하지만 라우팅 최적화는 홈 에이전트 또는 상대 노드와 직접 통신을 하기 때문에 이동 네트워크가 이동 시마다 갱신된 위치를 알려주어야 하며 이로 인하여 바인딩 갱신 폭풍 문제가 발생한다. 본 논문에서는 분산 바인딩 갱신기법을 제안하여 바인딩 갱신 폭풍으로 인하여 발생되는 대역폭 감소와 바인딩 갱신 지연 문제를 해결하고 시뮬레이션을 통하여 제안기법의 성능을 분석하였다.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.3
• /
• pp.45-56
• /
• 2000

An experimental and numerical investigation was made to examine the characteristics of pontoon type floating breakwaters(FBW) in regular waves. Motion responses of FBW and wave transmission coefficients are observed and compared with the results based on the linear potential theory. The linear potential theory is found to be a successful tool to investigate the characteristics of the floating breakwaters. We confirm that there exists a minimum wave transmission coefficient which is a function of wave-length/beam and beam/draft ratio. As beam/draft ratio increases the value of wave-length/beam ratio where the minimum, wave transmission coefficient occurs increases. Excessive mooring stiffness can deteriorate the performance of the floating breakwaters.

• Research in Plant Disease
• /
• v.10 no.4
• /
• pp.268-271
• /
• 2004

Occurrence and soil fumigation effect on black root rot of peony was investigated. Peony was severely infected to black root rot caused by Cylindrocarpon destructans in continuous cropping field, but in first cropping field was less infected. To control black root rot, soil improvement, soil fumigation and the root dipping in chemicals were trialed in peony continuous cropping field. Black root rot was not decreased by soil improvement, but incidence of black root rot of peony cultivated in continuous croping field of peony was decreased by soil fumigation with Dazomet GR. and dipping of peony root in chemicals.

• Clinics in Shoulder and Elbow
• /
• v.9 no.2
• /
• pp.231-234
• /
• 2006

We experienced a case of impingement caused by a bone fragment which was impacted between acromion and humeral head in a child. The bone fragment came from antero-inferior glenoid fracture. Satisfactory clinical results and stability were obtained by arthroscopic bone fragment removal. In case that bone fragment is located in the upper shoulder joint and results in impingement, We must consider not only greater tubercle fracture but also glenoid fracture. Magnetic resonance imaging can assist in the preoperative diagnosis.

• Annual Conference on Human and Language Technology
• /
• 2014.10a
• /
• pp.100-106
• /
• 2014

URI spotting (탐지) 문제는 텍스트에 있는 단어열 중에서 URI로 대표되는 개체(entity)에 해당되는 것을 탐지하는 것이다. 이 문제는 두 개의 작은 문제를 순차적으로 해결하는 과제이다. 즉, 첫째는 어느 단어열이 URI에 해당하는 개체인가를 인식하는 것이고, 둘째는 개체 중의성 해소 문제로서 파악된 개체가 복수의 URI에 해당할 수 있는 의미적 모호성이 있을 때 그 URI중 하나를 선택하여 모호성을 해소하는 것이다. 이 논문은 디비피디아 URI를 대상으로 한다. URI 탐지 문제는 개체명 인식 문제와 비슷하나, URI(예를 들어 디비피디아 URI, 즉 Wikipedia 등재어)에 매핑될 수 있는 개체로 한정되므로 일반적인 개체명 인식 문제에서 단어열의 품사열이 기계학습의 자질로 들어가는 방법론과는 다른 자질을 사용할 수 있다. 이 논문에서는 한국어 텍스트를 대상으로 한국어 디비피디아 URI 탐지문제로서 SVM을 이용한 개체경계 인식 방법을 제시하여, 일반적 개체명 인식에서 나타나는 품사태거의 오류파급효과를 없애고자 한다. 또한 개체중의성 해소 문제는 의미모호성이 주변 문장들의 토픽에 따라 달라지므로, LDA를 활용하며 이를 영어 디비피디아 URI탐지에서 쓰인 방법들과 비교한다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2001.11a
• /
• pp.43-52
• /
• 2001

Condition monitoring plays a vital role since it sustains the reliable operation of industrial plant and machinery in the pursuit of economic whole life operation. In order to achieve this goal, it is needed to monitor various parameters of mechanical system such as vibration, wear, temperature, and etc., and finally to diagnosis the root causes of any possible abnormal machine condition. In this work, we constructed a rotor system where various types of functional machine failures occurred frequently in industry were induced. Characteristics of the machine failure were monitored simultaneously by the on-line measurement of vibration, wear and temperature. Result showed that these parameters responded differently to the induced functional machine failure. The availability of each parameter on effective condition monitoring was discussed in this work.