• Korean Journal of Food Science and Technology
• /
• v.18 no.4
• /
• pp.288-293
• /
• 1986

A raw starch-digesting enzyme from Rhizopus oryzae was purified by ammonium sulfate fractionation, DEAE-sephacel column chromatography and Sephadex G-150 gel filtration. The specific activity of purified enzyme was 45.2 Ulmg protein and the yield was 16.2%. The purified enzyme was found to be homogeneous bypolyacrylamide gel electrophoresis and its molecular weight was estimated to be 67,000 by SDS-polyacrylamide gel electrophoresis, and also the enzyme had Km value of 4.082 mg/ml for raw corn starch. The optimal temperature and pH for the enzyme activity were $50^{\circ}C$ and 4.0-5.0, respectively. Reaction product of raw corn starch by purified enzyme was glucose mainly.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.8
• /
• pp.867-880
• /
• 1992

In this paper, a circuit design techniques for Improving the voltage gain of the GaAs MESFET single amplifier is presented. Also, various types of existing current mirror and proposed current mirror of new configuration are compared. To obtain the high differential mode gain and low common mode gain, bootstrap gain enhancement technique Is used and common mode feedback Is employed In the design of differential amplifier. The simulation results show that designed differential amplifier has differential gain of 57.66dB, unity gain frequency of 23.25GHz. Also, differential amplifier using common mode feedback with alternative negative current mirror has CMRR of 83.S8dB, stew rate of 3500 V /\ulcorners.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1515-1517
• /
• 2005

In this paper, we represent both occurrence reason of Surge-voltage and Leakage-current of AC drive system which is operated by Voltage-type PWM Inverter. It generates a compensating voltage which has the same amplitude as, but the opposite phase to, the common-mode voltage produced by the PWM inverter. The compensating voltage is superimposed on the inverter output by a common-mode transformer. As a result, the common-mode voltage applied to the load is canceled completely. The design method of the active common-mode noise canceler is also presented in detail. Therefore, we try to describe the method controling both of them and all of the proprieties are proved by our experiment.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.1
• /
• pp.329-336
• /
• 2013

The infrastructure of flexible pavement is composed of aggregate subbase, anti-frost layer, and subgrade. In particular, the subgrade performance is affected by climates such as frost action and precipitation. The method of TDR(Time Domain Reflectometry) sensors to measure moisture contents in subgrade layer has been used in the research. Due to the TDR method using dielectric permitivity of soil and water, the sensors can be affected by the low subgrade temperatures. The air temperatures frequently drops below $-20^{\circ}C$ in the winter in Korea. As a result, it is necessary to estimate the accuracy of the TDR moisture sensors in the range of below zero temperatures. In this study, the subgrade temperatures of lower than $-2^{\circ}C$ were extended to evaluate temperature sensitivity of the TDR moisture sensors. The test results revealed that the moisture contents around the sensors were reduced while those of the upper part of specimen showed a tendency to increase as the specimen surface temperature drops below zero under the volumetric moisture contents(VMC) of 20% and 30%. However, the impact of temperature on the function of the sensor at lower water contents was found to be negligible if any.

• Journal of the Korean Data and Information Science Society
• /
• v.27 no.1
• /
• pp.67-74
• /
• 2016

Due to the character of the climate of Korea, the pavement of a road is Influenced by freezing in winter season and thawing in thawing season. In the last few years, several articles have been devoted to the study to minimize the damage of freezing and thawing action. The purpose of this paper is to identify appropriacy of factors that influence road pavement thickness. We conduct the decision tree analysis on the field data of road pavement. The target variable is 'Frost penetration'. This value was calculated from the temperature data. The input variables are 'Region', 'Type of road pavement', 'Anti-frost layer', 'Month' and 'Air temperature'. The region was divided into 9 regions by freezing index $350{\sim}450^{\circ}C{\cdot}day$, $450{\sim}550^{\circ}C{\cdot}day$, $550{\sim}650^{\circ}C{\cdot}day$. The type of road pavement has three-section such as area of cutting, boundary area of cutting and bankin, lower area of banking. As the result, the variables that influence 'Frost penetration' are Month, followed by anti-frost layer, air temperature and region.

• Korean journal of applied entomology
• /
• v.45 no.1 s.142
• /
• pp.97-100
• /
• 2006

Tipula nova appeared to have three generations a yew under the rearing conditions at room temperature. The first-generation with its eggs laid in April spent from 51 to 117 days, while the second-generation with its eggs laid in July spent from 57 to 93 days. The third-generation in which eggs were laid in September to grow until the following spring took 79 to 200 days. All the processes of life cycle of the species, when reared at room temperature from the spring to the summer with eggs deposited in the spring, were as follows: Eggs usually hatched between 7 and 10 days after oviposition. First instar larvae molted to the second instar in 7-10 days. Second instar larvae spent 7-12 days for next molting and third instar period lasted approximately 7-11 days. Fourth instar larvae spent 17-50 days for pupating. The duration of pupal stage was 3-6 days.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.10
• /
• pp.1275-1281
• /
• 2019

The automatic modulation recognition of a radio signal is a major task of an intelligent receiver, with various civilian and military applications. In this paper, we propose a method to recognize the modulation of radio signals in wireless communication based on the deep neural network. We classify the modulation pattern of radio signal by using the LSTM model, which can catch the long-term pattern for the sequential data as the input data of the deep neural network. The amplitude and phase of the modulated signal, the in-phase carrier, and the quadrature-phase carrier are used as input data in the LSTM model. In order to verify the performance of the proposed learning method, we use a large dataset for training and test, including the ten types of modulation signal under various signal-to-noise ratios.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.3 no.2
• /
• pp.131-137
• /
• 1998

The solar cells should be operated at the maximum power point because its output characteristics are greatly fluctuated on the variation of insolation, temperature and load. Photovoltaic system needs an inverter which can interface the dc output power of solar cell with the residential ac load. The inverter has to supply a sinusoidal current and voltage to the load and the utility line with a high power factor. This paper proposes an utility interactive photovoltaic system designed with a step-up chopper and a PWM voltage source inverter. The step-up chopper operates in continuous mode by adjusting the duty ratio so that the photovoltaic system tracks the maximum power points of solar cell without any influence on the variation of insolation and temperature. The voltage source inverter operates in a manner that its output voltage is in phase with the utility voltage. The inverter supplies an ac power with high factor and low level of harmonics to the load and the utility power system.

• Applied Biological Chemistry
• /
• v.33 no.4
• /
• pp.287-292
• /
• 1990

Eight(I through VII) of Bowman-Birk proteinase inhibitor have been isolated from soybean with DEAE-Sephadex A-50. Inhibitor VII was a typical BBTI, showing high cysteine content(17%/mole) ud low trypsin to chymotrypsin inhibiting activity(TIA/CIA= 1.0) with the independent reactive site to each enzyme. Dissociation constant of trypsin-BBTI and chymotrypsin-BBTl complexes were $9.17{\times}10^{-9}M$ and $5.14{\times}10^{-8}M$, respectively. Inhibitor Vll was extremely heat stable. Six hours heat treatment at $100^{\circ}C$ caused only 50% decrease in it's original inhibiting activity. Except inhibitor III,6 other isoinhibitors differed from a typical BBTI in TIA/CIA, values, ranging from 3 to 29.

• Archives of Reconstructive Microsurgery
• /
• v.2 no.1
• /
• pp.70-76
• /
• 1993

The authors analyzed the clinical results of the reconstructive surgery for injured hands and feet due to frostbites and electrical burn with microsurgery in 7 patients, 12 cases at the department of orthopaedic surgery, school of medicine, Kyung Hee university from Jan. 1989 to Jul. 1992, and the results were as foollowings. 1. The age at the time of injury was av 24.6 yrs ranging from 4 to 35 yrs, and all cases were male. 2. The follow up period was av. 24.4 Mo ranging from 12 Mo. to 56 Mo. 3. The causes of injury were frostbite in 9 cases, electrical burn in 2 cases. 4. Initial operative treatment was performed av. 69.3 days ranging from 2 to 210 days. 5. For the reconstructive procedure, scapular free flap was applied in 6 cases, radial forearm flap in 4, dorsalis pedis 1ffap in 1, neurovascular island flap in 1. 6. Among total 12 cases, there were 5 cases(41.7%) of wound infection and 3 cases (25.0%) of partial necrosis of donor flap. 7. In 11 cases(90.1%), the end result was satisfactory. In the analysis of above results the reconstruction with microsurgery is effective procedure for reconstruction of Injured hand and foot due to frostbite and electrical burn.