• Journal of the Korean Ceramic Society
• /
• v.41 no.10 s.269
• /
• pp.749-755
• /
• 2004

Fluosilicic acid ($H_2SiF_6$) is recovered as aqueous solution which absorbs $SiF_4$ produced from the manufacturing of industrial-graded $H_3PO_4$ or HF. Generally, fluosilicate salts prepared by the reaction between $H_2SiF_6$ and metal salts. Addition of fluosilicate salts to cement endows odd properties through unique chemical reaction with the fresh and hardened cement. In this study, two-component fluosilicate salt based chemical admixtures (MZ) of $4\%,\;6\%$, and $8\%$ concentration were prepared by the reaction of $H_2SiF_6$ ($25\pm2\%$) and metal salts. The effect of concentration of MZ at a constant adding ratio on the hydration and watertightness of cement were investigated respectively. In a cement containing MZ, metal fluorides such as $CaF_2$ and soluble silica by hydrolysis were newly formed during hydration. The total porosity of the hardened cement was lower in the presence of U because of packing role of metal fluoride and pozzolanic reaction of soluble $SiO_2$. Consequently, the watertightness of the hardened paste containing MZ was more improved than non-added (plain) due to an odd hydration between cement and MZ.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.4
• /
• pp.258-266
• /
• 2011

Scale induced by hardness materials in water must be controled because of it can be result in remarkable damages of pipeline as well as water quality deterioration. Especially hot water system is one of scale management required facility as scale formation can be accelerated by temperature. The scale control performance of frequency driver (FD) was tested instead of existing methods such as chemical, physical and electromagnetic methods which needs chemicals and electric power. Three kinds of pipe coupons were submerged in test water with 500 mg/L of hardness for 33 days and XRD and SEM were analysed for comparing scale formation characteristics of these coupons. Calcite ($CaCO_3$) which came from hardness of water was formed on only cast iron pipe coupon and this coupon showed higher corrosion rate than copper and stainless steel pipe coupon. Hot water circulating system connected cast iron pipe with and without FD was operated with 300 mg/L of hardness water at $50^{\circ}C$ for monitoring of scale formation and water quality with and without FD. XRD showed that FD leaded to magnetite ($Fe_3O_4$) scale which is good scale for preventing corrosion than calcite and SEM image also indicated the scale control effect of FD. Scales of 16% on pipe joint, 14% on pipe length, and 42% on heat exchanger decreased with FD comparing scales of those parts without FD. From the results of water quality, FD reduced crystallization of hardness material without chemical reaction in water and it can indicate that FD is safe and proenvironmental technology for scale reduction.

• Journal of Veterinary Clinics
• /
• v.26 no.1
• /
• pp.8-16
• /
• 2009

The production of reactive oxygen species (ROS) and nitric oxide (NO) by anticancer agents in rat polymorphonuclear leukocytes (PMN) was examined. PMN treated for short term (< or = 4 h) with cyclophosphamide, cisplatin, tamoxifen and doxifluridine, respectively, exhibited an enhanced respiratory burst upon formylmethionylleucy1-phenylalanine (FMLP) stimulation. In the long term (> 4h), the production of ROS was suppressed in a concentration-dependent manner. The production of superoxide anion (${O_2}^-$) from the FMLP-stimulated PMN was enhanced by the treatment (for 1 hr) of cyclophosphamide, cisplatin, tamoxifen and doxifluridine, respectively. While 1 hr-treatment with cyclophosphamide, cisplatin, tamoxifen, and doxifluridine, respectively, suppressed the production of NO from the FMLP-stimulated PMN, while 8 hr-treatment enhanced the production of NO. Neomycin suppressed chemiluminescence in cisplatin-, tamoxifen- and doxifluridine-pretreated PMN, however near suppression of chemiluminescence by ethanol and genistein was observed in PMN pretreated with these agents. Staurosporine and bisindolylmaleimide suppressed chemiluminescence in cisplatin- and doxifluridine- pretreated PMN. Wortmannin has shown a slight suppression in cyclophosphamide-, cisplatin- and tamoxifen-pretreated PMN, but a strong suppression in doxifluridine-pretreated PMN. Methionine strongly suppressed in cyclophosphamide and cisplatin-pretreated PMN. In conclusion, these results indicate that long term treatment of PMN with cisplatin and doxifluridine inhibit respiratory burst through protein kinase C (PKC) translocation, phospholipase C (PLC), D (PLD) and tyrosine phosphorylation kinase (TPK) activation. Tamoxifen inhibits respiratory burst through PLC, PLD, TPK. Cyclophosphamide inhibits respiratory burst through myeloperoxidase (MPO) activity.

• Journal of the Korea Concrete Institute
• /
• v.15 no.6
• /
• pp.802-810
• /
• 2003

In this paper, the modified singular fracture process zone (S-FPZ) model is proposed to consider variation of a fracture criterion for continuous crack propagation in concrete. The fracture properties of the proposed fracture model are strain energy release rate at a micro-crack tip and crack closure stress (CCS) versus crack opening displacement (COD) relationship in the FPZ. The proposed model can simulate the estimated fracture energy of experimental results. The analysis results of the experimental data shows that specimen geometry and loading condition did not affect the CCS-COD relation. But the strain energy release rate is a function of not only specimen geometry but also crack extension. Until 25 mm crack extension, the strain energy release rate is a constant minimum value, and then it increased linearly to the maximum value. The maximum fracture criterion occurred at the peak load for an large size specimen. The fracture criterion remains the maximum value after the peak load. The variation of the fracture criterion is caused by micro-cracking and micro-crack localizing. The fracture criterion of strain energy release rate can simply be the size effect of concrete fracture, and it can be used to quantify the micro-tracking and micro-crack localizing behaviors of concrete.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.5
• /
• pp.869-875
• /
• 2017

Using TCAD simulation, performances of tunnel field-effect transistors (TFETs) was investigated. Drain current-gate voltage types of TFET structure such as single-gate TFET (SG-TFET), double-gate TFET (DG-TFET), L-shaped TFET (L-TFET), and Pocket-TFET (P-TFET) are simulated, and then as dielectric constant of gate oxide and channel length are varied their subthreshold swing (SS) and on-current ($I_{on}$) are compared. On-currents and subthreshold swings of the L-TFET and P-TFET structures with high electric constant and line tunneling were 10 times and 20 mV/dec more than those of the SG-TFET and DG-TFET using point tunneling, respectively. Especially, it is shown that hump effect which dominant current element changes from point tunneling to line tunneling, is disappeared in P-TFET with high-k gate oxide such as $HfO_2$. The analysis of 4 types of TFET structure provides guidelines for the design of new types of TFET structure which concentrate on line tunneling by minimizing point tunneling.

• Journal of Life Science
• /
• v.20 no.1
• /
• pp.71-76
• /
• 2010

The purpose of this study was to investigate the changes of long term ECG response in a company with middle-aged male employees. Subjects were 60 men who were 40~55 years old. We enrolled 30 exercise group subjects into a 3-year exercise program. In measurement index, body composition was measured by % body fat and BMI. Exercise stress test analyses were measured using ST/HR slope and QRS vector. Statistical analysis was performed using analysis of repeated ANOVA. Results of this study were as follows: In ST/HR slope, the control group showed symptoms of ischemia after nine minutes of exercise. In the rest frontal axis of the QRS vector, the control group had a tendency towards right axis deviation. In the rest horizontal amplitude of the QRS vector, the control group had a tendency to show a significant decrease, but it was increased significantly in the exercise group. These findings suggest that inactive company workers was showed a decrease of exercise capacity, early diagnosis exercise-induced ST depression, and prolonged deviation of QRS vector, but that cardiac function could be elevated in active middle aged men through regular exercise program participation.

• Journal of Life Science
• /
• v.19 no.8
• /
• pp.1047-1054
• /
• 2009

Oral squamous carcinoma (OSC) cells present resistance to chemotherapeutic agents-mediated apoptosis in the late stages of malignancy. Advances in the understanding of bacterial toxins have produced new strategies for the treatment of cancers. It was demonstrated here that Pseudomonas aeruginosa exotoxin A (PEA) significantly decreased the viability of chemoresistant YD-9 cells in the apoptosis mechanism. Apoptotic manifestations were evident through changes in nuclear morphology and generation of DNA fragmentation. PEA treatment induced caspase-3, -6 and -9 cleavage, and activation. These events preceded proteolysis of the caspase substrates poly (ADP-ribose) polymerase (PARP), DNA fragmentation factor 45 (DFF45), and lamin A in YD-9 cells. The reduction of mitochondrial membrane potential, release of cytochrome c and SmacjDlABLO from mitochondria to cytosol, andtranslocation of AlF into nucleus were shown. While p53, p21 and $14-3-3{\gamma}$ were upregulated, cyclin Band cdc2 were downregulated by PEA treatment. Taken together, PEA induces apoptosis in chemoresistant YD-9 cells via activation of caspases, mitochondrial events and regulation of cell cycle genes.

• Journal of Korean Society for Geospatial Information Science
• /
• v.16 no.3
• /
• pp.35-41
• /
• 2008

Recently needs for the convergence of CAD and GIS data are increasing, and many studies on converting two systems to each other are being carried out. In this study, to revise and update the building data of digital map using CAD data for construction, the outline of building is abstracted from the CAD data and the outline is generalized to the same level of detail with the building data of digital map. Several line simplification algorithms to generalize the outline are adopted and compared, especially at the view of satisfaction to the drawing rule for digital map. Douglas-Peucker algorithm, Lang's algorithm, Reumann-Witkam algorithm, and Opheim algorithm are applied as the line simplification method. To evaluate the results of these algorithms, visual assessment and variation ratio of the number of points, total length of lines, the area of polygon, and satisfaction ratio to the drawing rule of digital map are analyzed. The result of Lang algorithm and Douglas-Peucker algorithm show superior satisfaction ratio. But general satisfaction ratio is 50~60% for all algorithm. Therefore there seems to be a limit to use these algorithms for the simplification method to update the building data in digital map and it is necessary to develop line simplification algorithm which satisfy the drawing rule well.

• Journal of the Korean Vacuum Society
• /
• v.19 no.3
• /
• pp.236-241
• /
• 2010

ZnO nanorods were grown on ZnO seed layer by hydrothermal method. The ZnO seed layer was coated by sol-gel method, and then the ZnO nanorods on ZnO seed layer were grown with different precursor concentrations ranging from 0.01 M to 0.3 M. FE-SEM (field-emission scanning electron microscopy), XRD (X-ray diffraction), and PL (photoluminescence) were employed to investigate the structural and optical properties of the ZnO nanorods. The diameter and length of ZnO nanorods are increased and also the optical properties are enhanced as the precursor concentrations are increased.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.2
• /
• pp.405-410
• /
• 2021

In this study, a finite element analysis was performed applying a nonlinear material model and fatigue load conditions to evaluate the service life and spring stiffness of the resilient pad for rail fastening system. As a result of the fatigue analysis, the rate of change in spring stiffness compared to the initial condition was about 16%, indicating that fatigue hardening occurred. As for the stress generated in the longitudinal direction of the resilient pad, the difference between the stress generated at the center and the edge was about 10 times or more. In addition, it was analyzed that the equivalent stress of the outer boundary was more than twice as large as that of the central part. Therefore, it was analyzed that the damage and deformation of the resilient pad are the corners of the resilient pad under actual service conditions. The fatigue life diagram of the resilient pad (S-N curve) was derived using the equivalent stress of the resilient pad according to the fatigue cycles. Using the fatigue life diagram of the resilient pad derived in this study, it is considered that it can be used to predict the fatigue life under the relevant conditions by calculating the equivalent stress of the resilient pad under various load conditions.