• Journal of the Korea institute for structural maintenance and inspection
• /
• v.13 no.1 s.53
• /
• pp.78-87
• /
• 2009

When the steel slag is utilized to the concrete as the alternative fine aggregate, its use is limited as the concrete aggregate because of expansibility caused by much quantity of free CaO. So, this study is intended to examine the characteristics of the concrete which uses the rapidly cooled steel slag whose content of free CaO is sharply reduced by rapidly cooling the steel slag as the fine aggregate. Accordingly, by comparing and considering the results of the concrete slump loss test with the different substitution ratio and fine aggregate ratio of rapidly cooled steel slag, hydration by XRD and SEM analysis, compressive test by age, a length variation test and rapid chloride ion penetration test, the rapidly cooled steel slag's proper substitution ratio and the fine aggregate ratio was derived.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.4
• /
• pp.75-81
• /
• 2003

To investigate the reinforcing effect of subsurface layers of marine dredged clay(DMC) mixed with the micro-fiber(MF), a series of laboratory tests were performed on the DMC specimens with and without MF through uniaxial and triaxial compression tests. For the test programme, the elapsed time after dredging of marine clay, mixing rate and length of MF, and curing time of the composite were chosen as the important factors affecting the strength behaviour. The strength of the DMC mixed with MF and waste lime(WL) used for the admixture was found to be enhanced with the increasing content and length of MF, and with decreasing water content of DMC. MF and WL were applied as materials for trafficability improvement of the very soft reclaimed ground by DMC.

• Korean Journal of Environment and Ecology
• /
• v.18 no.1
• /
• pp.7-17
• /
• 2004

The objective of this study was to find eco-revegetation measures recycling remnant root-stock of native species which comes to be disused. The monitoring plot was established in Nov.2001 at Honam University's affliated farm that is located in Wolya-Myeon, Hampyeong-Gun, Jeollanam-Do. The plots were monitored 2 times each in Oct.2002 and Sep.2003. Sprout and survival rate of the root-stock including the effect of trunk length, antiseptic treatment, planting season and number of planted were surveyed. The results of the study were as follows Ten tree species including Zelkova serrata among twenty tree species showed outstanding sprout and survival rate (over 90 percent). The growth rate was better in the longer trunk length root-stocks (35cm) than shorter ones (10cm). There was a difference in the size of the root ball when digging the root-stocks. It showed better condition when the root ball sizes were 3 times wide and 5 times deep of the root-stocks or 5 times wide and 5 times deep. Antiseptic treatment on the cuts of the trunk of root-stocks makes a difference in the growth rate. The survival rate of the root-stock showed highest value (100％) when it was transplanted in late autumn (November). And the next best survival rate was reached when it was in early or late spring (March and May)

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.1253-1257
• /
• 2010

그라우팅은 건설공사에서 지반의 갈라진 틈이나 공동, 공극 등에 적절한 충전재를 압력을 이용하여 주입하는 것으로, 굴착공사 시 누수방지와 불안정한 지반의 보강을 위하여 광범위하게 사용되고 있다. 가장 많이 사용되고 있는 그라우팅 주입재의 재료로는 물유리계를 주재료로 사용하는 약액주입공법이 많이 사용되어지고 있다. 기존의 물유리계 재료를 사용할 경우 발생하는 용출현상 및 강도저하를 보완하기 위하여 가소성을 부과한 무기질계 재료ECG(Eco Clean Grouting)를 사용하여, 강도 및 내구성이 우수하고 주입재의 용출 현상이 발생하지 않아 환경오염 문제가 거의 없는 영구적인 차수 및 보강에 적합한지와 친환경적 특성을 확인한다. 본 연구는 가소성 무기질계 재료인 ECG(Eco Clean Grouting)재료를 사용하여 현재 많이 사용되는 재료인 물유리계 재료로 일축압축강도, 체적변화, 내구성 평가, 투수시험, 어독성 시험, 용탈시험등을 수행하여 비교 분석 하였다. 일축압축 시험결과 재령 28일 강도는 ECG가 물유리재료에 비해 크게 발현되었고, 내화학성시험 결과 ECG의 길이변화율이 거의 없는 것으로 내화학성에서 강점을 보였다.

• Land and Housing Review
• /
• v.3 no.3
• /
• pp.287-297
• /
• 2012

To develop 80MPa-high strength concrete with ternary cement used in OPC, blast-furnance slag, and fly ash, mixing ratio of blast-furnace slag and fly ash was evaluated in material characteristics before and after hardening of the high strength concrete. According to the evaluated results of material characteristics before and after hardening of the high strength concrete, the flowability and long-term compressive strength increase up to 30% mixing ratio of blast-furnace slag and fly ash. Also, it is superior to characteristics of length change and neutralization due to the use of mineral admixture when compared in test sample mixed with OPC. The evaluated results show that material characteristics of the high strength concrete was the most outstanding performance at blast-furnace slag of 25% and fly ash of 15%. The result of this study will be useful for the development of high strength concrete as a substitute of costly silica fume in the near future.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.4
• /
• pp.290-296
• /
• 2018

In this study, the cold test and the numerical analysis were carried out according to the shape parameters of the test model in order to confirm the operation range of high altitude environment simulation test facility for the supersonic vehicle. The blockage ratio, angle and length ratio were considered as the design parameters. The blockage rate is expected to be limited in the region of more than 40% due to the normal shock and expansion fan. It was confirmed that the angle of model should be selected at the size of 45 degrees or less due to the influence of the strong shock wave. There was no difference in performance between the lengths of 8 times the model diameter. Finally, we obtained the performance database according to the shape parameters of the conical test model and confirmed the operable range of the semi-freejet type high altitude environment simulation test facility.

• Journal of the Korean GEO-environmental Society
• /
• v.7 no.6
• /
• pp.113-119
• /
• 2006

Recently, the ground injection method using water glasses as one of the main resources and the products of these constructions have basic problems in terms of the method of constructions for the permanent foundation reinforcement and stopping leakage of water because they have some serious problems such as durability, compressive strength, injectant eluviation and so forth even though they are still used to stop leakage of water in the temporary structures. The purpose of this study is to demonstrate the strength characteristic and environment friendliness of NDS method by unconfined compressive strenth test, permeability test, length change test, leaching test, and assessment of environmental impact in comparison water glass type material. The test results show that NDS method has significant improvement of strength, permeability, volume change, and leaching. An assessment of environmental impact also demonstrates that the NDS material is environmentally friendly.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.36 no.4
• /
• pp.281-286
• /
• 2000

To analyze the shape of the net mouth of bottom trawl which is composed with 6 seams net, the field experiment was carried out on the sea near Kokunsan Is, Western sea of Korea. The distance of otter board, net height, trawl speed and resistance of the fishing gear were respectively measured according to the change of warp length and towing speed. The results obtained are summarized as follows : 1. The spreading distance of the otter board has been increased straightly according to the increment of towing speed and warp length. The rate of increase by the warp length has been greatly higher than the rate of increase by the towing speed. The total variation of the spreading distance was 57.0-82.8m, and it was occupied 43-62% of the hand rope, net pendent and the length of nets. 2. The height of net mouth has been decreased straightly according to the increment of towing speed and warp length. The rate of decrease by the towing speed has been greatly higher than the decrease rate of the warp length. The total variation of the net height was 3.1-4.0m. 3. When the distance of wing tip is increased, the height of net mouth is decreased, but the ratio of the decreasing rate of the height of net mouth for the increasing rate of the distance of wing tip was gradually low according to the increment of warp length. 4. The ratio of the distance of both wing tip for the height of net mouth has been increased gradually according to the increment of towing speed and warp length, and the total variation of the ratio was 4.17-7.81 times.

• Journal of the Korea Institute of Building Construction
• /
• v.14 no.4
• /
• pp.308-313
• /
• 2014

Recently, for longevity of resident building, the main trend is that the change of the inside space organization of resident building from wall construction to rhamen construction, which resulted in increase in use of lightweight composite panel. Thus, in this study, authors analyzed the engineering property of oxide of magnesium depending on the magnesium chloride addition ratio. The results of this research is expected to contribute on providing a fundamental material for the surface materials of lightweight composite panel. As the result of the experiment, as fluidity increased, air content decreased and initial set and final set as the magnesium chloride addition ratio increase. In the aspect of flexural strength and compressive strength, the test specimen showed the highest strength at 40% of the magnesium chloride addition ratio. At 20% of the magnesium chloride addition ratio, the test specimen showed the lowest water absorption rate. As the magnesium chloride addition ratio increases, the expansibility tends to increase as well in the aspect of shrinkage strain. After observing microstructure, we can see hydration products in the form of needle. It appeared high flexural strength because the hydration products have mineral fibrous tissue shape, which also contribute to the cause of the expansibility.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2021.04a
• /
• pp.43-43
• /
• 2021

로즈마리(Rosmarinus officinalis)는 지중해 지역이 원산이고 꿀풀과에 속하는 다년생 식물로 자생지에서는 식물의 크기가 2m까지 자라는 관목성 식물이다. 식용, 약용, 미용, 향료뿐 아니라 관상용으로도 널리 이용되고 있고 특히 향이 좋아 세계 로즈마리 추출물 시장은 연평균 4.8%씩 증가하여 2027년에는 10억 달러를 넘을 것으로 예측된다. 우리나라도 소비 트렌드 변화에 따른 이용성 확대로 신선허브의 수요가 증가하고 있으나 아직은 허브 식물원료의 대부분을 수입에 의존하고 있고, 로즈마리 역시 식물원료뿐 아니라 가공품까지 외국에서 수입하여 사용하는 실정이다. 2018년 로즈마리 수입량은 신선상태 978kg, 건조상태 23,404kg으로 높은 수입의존에 따른 가격 상승과 긴 유통기간에 의한 품질 저하 등의 문제가 발생하고 있다. 본 연구는 로즈마리 어린 순 재배 적정 삽수 길이를 설정하고 어린 순 생산 가능 기간을 구명하여 추후에 고품질 로즈마리 어린 순 집약생산을 위한 다단재배기술을 확립하고자 수행되었다. 삽수 길이는 5, 10, 15cm로 하였고, 삽목 시기는 4월 하순 ~ 8월 하순까지 30일 간격으로 5회 실시하였다. 적정 삽수 길이 설정 실험에서는 15cm 삽수 발근률이 85.6%로 가장 높았으며 신초 출현시기는 5월 26일, 어린 순 생산시기는 6월 23일로 가장 빨랐고 수확시까지 소요일수는 56일로 가장 짧았다. 기대수량 또한 728g/m²로 가장 높았다. 로즈마리 어린 순 생산 가능 기간 구명 실험에서는 4월 28일 삽목시 발근율이 85.6%로 가장 높았고 육묘기간은 28일 어린 순 생산까지 소요일수는 56일로 가장 짧았다. 삽목 시기별 어린 순 품질 및 생산량은 4월 28일 삽목시 품질이 좋았으며 기대수량 또한 728g/m²로 가장 높았다. 결과적으로 상품성 있는 어린순 생산에 적합한 삽수 길이는 15cm, 삽목 시기는 4월 하순 경에 했을 때, 로즈마리의 생육상태, 수확까지의 기간, 어린 순 생산량 등 종합적인 면에서 가장 우수한 값을 얻을 수 있었다.