• Proceedings of the ESK Conference
• /
• 1992.10a
• /
• pp.22-25
• /
• 1992

항공산업은 그 특성상 고도의 신뢰성, 안정성이 요구되며, 이를 충족시키기 위하여는 복잡하고 정밀한 구조를 가져야 하므로 다른 산업제품과는 비교가 안될 정도로 그부가가치를 가지고, 타 산업에의 기술 파급 효과가 역시 지대하다. 따라서, 우리나라와 같이 부존자원이 빈약하나 인적 자원이 우수하고 풍부한 나라에서는 자원절약형 산업인 항공산업의 타당성을 검토, 장기적인 육성방안을 수립하여 추진하는 것은 시대적인 요구라 할 수 있다. 이러한 요구에 따라 국방과학연구소에서 공군의 초, 중등훈련기 개발을 추진 중에 있음은 KFP(Korea Fighter Program)사업과 함께 매우 중요한 의미을 갖는다. 이와 같은 시점에서 한국인의 인체특성에 보다 적합한 항공기의 개발은 가장 시급한 과제이며, 이 문제점을 극복하기 위한 기본연구로 조종실 내부설계에 필요한 기준점 및 치수, MIL-SPEC에서 규정하고 있는 기준치를 분석하였으며 실제 항공기(F-5, F-4, F-16)칫수를 측정하여 이를 정면도, 측면도, 평면도로 제시하고, 항공기 제어계통인 조종간, 동력제어기, 러더페달 및 조종석의 실제 측정치와 공군 조종사의 인체측정치를 비교, 평가하였다. 또한 전투기들의 정면 계기판과 좌, 우측의 제어판의 표시장치 및 조작기들을 기능별로 구분하여 각 요소별 제한조건 및 설계지침들을 비교, 분석하였다.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2022.10a
• /
• pp.405-406
• /
• 2022

재난 시 피해자를 위해 사용되는 고압산소치료 시 흔한 부작용으로 높아진 압력에 적응하지 못하고 귀의 통증을 비롯한 압력 손상의 증상이 발현되는 경우가 종종 존재하여 이는 고압산소치료 시 해결해야 할 과제로 떠올랐다. 이에 본 본 연구에서는 고압산소치료기에 개발된 압력손상방지장치를 연결하여 적용하였을 때 고압산소치료 중 압력손상이 조기 감지되고 이를 통해 고압산소치료를 받는 피해자가 압력손상이 진행되지 않는지에 대하여 연구하였다. 압력손상방지장치를 활용하면 고압산소치료 중 압력손상이 조기 감지되고 이를 통해 고압산소치료를 받는 피해자가 압력손상이 심하게 진행되지 않는데 도움을 받을 수 있다. 단 이는 피해자 본인이 체내압력 조절이 가능한 상태여야 하며 의식이 없거나 협조가 어려운 대상에 대한 압력손상방지는 또 다른 도전으로 향후 이에 대한 추가적 연구가 필요하다.

• Investigative Magnetic Resonance Imaging
• /
• v.9 no.1
• /
• pp.16-23
• /
• 2005

Purpose : In order to investigate the functional brain anatomy associated with mental calculation, functional magnetic resonance imaging was performed. Materials and Methods : In six normal right handed subjects, functional MR images were obtained using a 1.57 MR scanner and the EPI BOLD technique. The study included experiment I and experiment II. Each experiment consisted of five resting and four activation periods with each period of 30 seconds. During the activation period of both experiment I and II, calculation equations[an example: $(4+5)\times8=72$] were presented and the subjects were instructed to decide true or false of them. During the resting period of experiment I, the subjects were instructed to visually fixate on a crosshair. During the resting period of experiment II, two diagrams (an example: $(\bullet,\;\blacksquare)$)were presented and the subjects were instructed to decide they are same or not. For the post-processing of images, the SPM program was used, with the threshold of significance set at p<0.00001. The activated areas during the tasks were assessed. Results : In experiment 1, the inferior frontal gyrus, prefrontal cortex, promoter area, supplementary motor area, and intraparietal sulcus including superior parietal cortex were activated bilaterally. Although these areas were also activated in experiment II, the activated signals in the right frontal and parietal lobes were lessened. Conclusion : The left inferior frontal gyrus and prefrontal cortex and bilateral intraparietal sulci were activated during mental calculation. The right frontal and parietal lobes might be related to attention and decision making.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1468-1469
• /
• 2007

포항가속기 연구소에서는 RIS 프로젝트 사업과제의 일환인 L-band 산업용 전자빔 가속기의 제작 및 기술개발 연구를 철원의 물리기술연고소 주관으로 수행하고 있다. L-band 산업용 전자빔 가속기는 전자빔에 의한 고분자개질 공정, 농수산물의 멸균 및 의료기기의 멸균 등에 적용이 가능하다. 포항가속기연구소에서는 10 MeV급 산업용 전자빔 조사장치에 적용되는 RF증폭기용 펄스 전원장치인 모듈레이터를 설계, 제작을 하였다. 펄스 전원장치인 이 모듈레이터 시스템은 평균 출력 60 kW, 펄스폭 7 us, 펄스반복율 300 Hz의 L-band 상업용 RF 증폭기 전원장치이며, RF 증폭기로 사용되는 클라이스트론은 Thales 사의 TV2022D를 사용하였다. 본 논문에서는 펄스 전원장치인 모듈레이터의 운전과 인터록을 위한 제어장치의 개발과 제작에 대하여 논하고자 한다.

• Investigative Magnetic Resonance Imaging
• /
• v.3 no.1
• /
• pp.78-83
• /
• 1999

Purpose : To evaluate the language areas activated by fMRI during different reading tasks and to assess the difference of activated areas according to each reading task. Materials and Methods : Functional maps of the language area were obtained during three reading tasks(Korean consonant letter, pseudoword, and word) in nine right-handed volunteers(7 males 2 females). MR examinations were performed at 1.5T scanner with EPI BOLD technique(gradient echo shot EPI, TR/TE 3000/60, flip angle $90^{\circ}$, matrix $64{\times}64$, 5mm thickness, no slice gap). Each task consisted of three resting periods and two activation periods and each period lasted 30 seconds. We used SPM program for the postprocessing of images and signification level was set at p<0.01. Activated areas were topographically analyzed in each stimulus. Results : Significant activated signals were demonstrated in all volunteers. Activated signals were seen in the frontal, temporal, parietal and occipital lobes during reading tasks and they were lateralized to the left hemisphere except occipital lobe. Letter and pseudoword produced stronger activated signals than word, and the activated signals were more lateralized to the left hemisphere in pseudoword reading than in letter reading. Conclusion : Activated signals were induced in the language areas by reading task of letter or wordform. Greater activation of language areas was induced when letter or pseudowords were presented than familiar words.

• Communications of Mathematical Education
• /
• v.27 no.4
• /
• pp.449-472
• /
• 2013

Instructional materials including problem situations or problems or tasks on real-life situations are considered as an important and significant factor to lead a successful math instruction. MiC Textbook is a representative one showing good examples and tasks including fluent realistic situations on the basis of the background of the Freudenthal's theory. This study explores concretely and in detail the type of level of mathematical tasks, by the subject of MiC Textbook. To accomplish this, this study reconstructs and establishes an elaborated analysis framework using 'the cognitive demand level' suggested by Stein, et, al. The cognitive demand level is comprized of four elements such as Memorization Tasks, Procedures Without Connections Tasks, Procedures With Connections Tasks, and Doing Mathematics Tasks. Memorization Tasks and Procedures Without Connections Tasks are considered as low level tasks, and Procedures With Connections Tasks and Doing Mathematics Tasks are as high level tasks. MiC Textbook is comprized of the four areas of 'number', 'algebra', 'geometry and measurement', and 'data analysis and statistics'. This study deals with the tasks relevant to Function content dealt with in MiC 3 level Textbook, and explore the level of cognitive demands on each task.

• Journal of Korea Port Economic Association
• /
• v.31 no.1
• /
• pp.15-36
• /
• 2015

The purpose of this paper is "A Study on the Establishment of Distribution and Logistics System in the unified Korea". The main conclusion of this paper are as follows : North and South Korea shall conjunctionally foster the exchange and cooperation area and operate the joint pilot project to combine distribution and logistics system. To solve the problems of the maritime affairs, Fisheries, and international logistics, the cooperative agreement between North and South Korea will be needed to protect and develop of shipping, aviation and shipbuilding industry. Unification of two Koreas must be prepared as stage by stage ; ${\cdot}$Stage1(preparation period) : initiation of peace area. ${\cdot}$Stage2(development period) : forming the exchange and cooperation area ${\cdot}$Stage3(settlement period) : establishing peace belt on border area. After the unification, two Koreas must plan and undertake the construction of the distribution and logistics infrastructures, establishment of SCM system through Network and the connection to China through railway and road Network.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.91.2-91.2
• /
• 2010

SOFC는 높은 반응온도($600{\sim}1000^{\circ}C$)에서 작동되어 발전효율이 높고 다양한 연료를 사용할 수 있는 것이 장점이다. 하지만 고온에서의 운전은 구성요소의 열변형과 온도구배에 의한 전극촉매의 열화 그리고 밀봉재의 수명에 영향을 주어 결국 스택의 내구성을 감소시킨다. 특히 스택의 온도구배가 심화되면 국부적인 Hot spot를 형성하여 셀에 심각한 손상을 주게 된다. 본 과제에서는 SOFC 스택의 온도구배를 완화시키기 위한 내부개질기의 개발 및 고온용 분리판 소재의 정밀성형기술을 확보하고자 한다. 열/유동해석을 통하여 반응가스의 농도, 유속, 구조변경 등 내부개질기 온도구배에 대한 주요인자를 확인하였고, 장기 운전평가를 통하여 개질 촉매의 고온 활성 및 내구성에 대한 성능평가를 진행 중이다. 분리판의 경우, 고온용 소재(페라이트계 스테인레스)에 대한 기초실험을 실시하여 성형품질의 주요 인자를 파악하였으며 Proto-type 금형 설계 및 개발을 통하여 성형 기초기술을 확보하였다. 그리고 스택 내부온도를 구현할 수 있는 시뮬레이터를 설계 중에 있으며 이를 이용하여 개발된 내부개질기 및 분리판을 스택 운전환경에서 평가할 예정이다.

• Journal of Educational Research in Mathematics
• /
• v.20 no.4
• /
• pp.511-528
• /
• 2010

Students' intuition in formal proof should be expressed as symbols according to the deductive process. The symbol will play a role of the mediation between the intuition and the formal proof. This study examined the evolution process of intuition mediated by the symbol in geometry proof. According to the results first, symbol took the great roles when students had the non-formed intuition for the proposition. The signification of symbols could explain even the proof process of the proposition with the non-expectable intuition. And when students proved it by symbols, not by figure nor words, they could evolute the conclusive intuition about the proposition.

• Journal of Korea Technology Innovation Society
• /
• v.16 no.4
• /
• pp.1163-1186
• /
• 2013

Big science such as nuclear fusion accelerators shares the characteristic of requiring long-term and massive budget input, human power, and related state-of-the-art technology. Because big science, by nature, thus requires large-scale budgets and facilities yet harbors the possibility of failure, most projects are led by the government. When the actual circumstances are examined, however, such projects are often implemented through the formation of cooperative relations with small and medium businesses (SMBs) possessing outstanding technological capacity. On the other hand, the reality is that the entry of corporations into the business ecosystem of big science is not easy and that even those that have once entered big science likewise fail to find sales outlets for technology that they have developed following the supply of single items, thus leading their technological capacity to lie idle. Consequently, based on an awareness of the problem, the present study seeks to propose strategies for activating the business ecosystem of nuclear fusion and accelerators and to present alternatives regarding which policy tasks must be pursued first by using the analytic hierarchy process (AHP) technique. The present study derived the four policy alternatives of approach, care, expansion, and infrastructures in accordance with the results of empirical analysis to activate the business ecosystem of nuclear fusion and accelerators and analyzed their priority in terms of urgency and effectiveness, the results of which were, in this order: care-approach-expansion-infrastructures. The significance of such research results lie in presenting the policy direction when the government determines which policy task must be pursued first and implements strategies for the activation of the business ecosystem of nuclear fusion and accelerators with limited financial resources in the future.