• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.2
• /
• pp.132-139
• /
• 1992

This paper presents geometrically nonlinear formulation of shell problems using the three-dimensional curved shell element, which includs large displacements and large rotations. Formulations of the geometrically nonlinear problems can be derived in a variety of ways, but most of them have been obtained by assuming that nodal rotations are small. Hence, the tangent stiffness matrix is derived under the assumptions that rotational increments are infinitesimal and the effect of finite rotational increments have to be considered during the equilibrium iterations. To study the large displacement and large rotation problems, the restrictions are removed and the formulations of the curved shell element including the effect of large rotational increments are developed in this paper. The displacement based finite element method using this improved formulation are applied to the analyses of the geometrically nonlinear behaviors of the single and double curved shells, which are compared with the results by others.

• Journal of Korea Multimedia Society
• /
• v.9 no.5
• /
• pp.624-634
• /
• 2006

This paper presents a new watermarking scheme that is robust against geometrical attacks such as translation and rotation. The proposed method is based on the conventional PSADT(Polar Coordinates Shape Adaptive Discrete Transform) method which is an robust watermarking scheme for an arbitrarily-shaped image such as character images. The PSADT method shows perfect robustness against geometrical attack if there is no change in the shape of the image object. However, it cannot be utilized to watermark general rectangular images because of the missing alignment between the watermarked signals in the embedding and extracting side. To overcome this problem we propose a new watermarking scheme that aligns the watermark signal using the image inherent feature, especially corner. Namely the proposed method decides a consistent target region whose shape and position isn't changed by any malicious attack and then embeds the watermark in it using the PSADT method. Experimental results show the robustness of the proposed method against geometrical attacks as well as image compression.

• Journal of the Korean Society of Radiology
• /
• v.13 no.3
• /
• pp.399-406
• /
• 2019

This study aims to find geometric parameters that the radiologist can change from time to time to reduce dose in angiography examinations. Depending on the geometric characteristics, the values calculated by effective dose were compared, while filming in fluoroscopy mode and Digital subtraction angiography, respectively. The study found that the lower the dose was in FPS mode, the lower the dose was reduced to 30-40%. Doses according to the X-ray angle were measured highest in AP View and lower as the angle went in the head direction. The greater the FOV, the higher the dose was 1.2-1.6 times, and the closer the distance between the X-ray tube and the table, the greater the dose was about 10%. Source-image intensifier distance (SID) get longer to 100 mm, dose of each fluoroscopy and Digital subtraction angiography increase up to 25-30%. In conclusion, various geometric characteristics in angiography examinations are parameters that can be applied by radiographers as frequently as possible, and appropriate geometric properties can be considered and applied in various situations, resulting in appropriate dose reduction.

• Journal of radiological science and technology
• /
• v.29 no.3
• /
• pp.167-175
• /
• 2006

With the recent prevalence of helical CT and multi-slice CT, which deliver higher radiation dose than conventional CT due to overbeaming effect in X-ray exposure and interpolation technique in image reconstruction. Although multi-detector and helical CT scanner provide a variety of opportunities for patient dose reduction, the potential risk for high radiation levels in CT examination can't be overemphasized in spite of acquiring more diagnostic information. So much more concerns is necessary about dose characteristics of CT scanner, especially dose efficient design as well as dose modulation software, because dose efficiency built into the scanner's design is probably the most important aspect of successful low dose clinical performance. This study was conducted to evaluate z-axis geometric dose efficiency in single detector CT and each level multi-detector CT, as well as to compare z-axis dose efficiency with change of technical scan parameters such as focal spot size of tube, beam collimation, detector combination, scan mode, pitch size, slice width and interval. The results obtained were as follows ; 1. SDCT was most highest and 4 MDCT was most lowest in z-axis geometric dose efficiency among SDCT, 4, 8, 16, 64 slice MDCT made by GE manufacture. 2. Small focal spot was 0.67-13.62% higher than large focal spot in z-axis geometric dose efficiency at MDCT. 3. Large beam collimation was 3.13-51.52% higher than small beam collimation in z-axis geometric dose efficiency at MDCT. 4. Z-axis geometric dose efficiency was same at 4 slice MDCT in all condition and 8 slice MDCT of large beam collimation with change of detector combination, but was changed irregularly at 8 slice MDCT of small beam collimation and 16 slice MDCT in all condition with change of detector combination. 5. There was no significant difference for z-axis geometric dose efficiency between conventional scan and helical scan, and with change of pitch factor, as well as change of slice width or interval for image reconstruction. As a conclusion, for reduction of patient radiation dose delivered from CT examination we are particularly concerned with dose efficiency of equipment and have to select proper scanning parameters which increase z-axis geometric dose efficiency within the range of preserving optimum clinical information in MDCT examination.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.43 no.6 s.312
• /
• pp.71-82
• /
• 2006

For real-time animation, keyframe animation that consists of translation, rotation, scaling transform nodes is used widely in 3D graphics. This paper presents geometrical watermarking using vertex coordinates in CoordIndex node and interpolator watermarking using keyvalues in PositionInterpolator node for 3D keyframe animation based on VRML. Experimental results verify that the proposed algorithm has the robustness against geometrical attacks and timeline attacks as well as the invisibility.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1999.11b
• /
• pp.105-108
• /
• 1999

렌즈를 통하여 촬영하는 모든 영상은 근본적으로 렌즈에 의한 기하학적인 왜곡이 발생하게 된다. 특히 방송영상에 있어서 더 넓은 영역을 촬영하기 위하여 어안렌즈를 사용하게 되면 왜곡은 더욱 심각해진다. 이러한 기하학적인 렌즈 왜곡은 반지름 r에 대한 다항식으로 모델링될 수 있고 여기서 각 항의 계수를 구함으로써 왜곡은 보정될 수 있다. 각항의 계수는 Block-Matching Algorithm(BMA)을 이용한 대응 화소 검출을 통해서 얻어 질 수 있는데 기존의 BMA는 사각형의 정해진 크기의 탐색 영역(search region)을 가지게 되므로 렌즈왜곡과 같은 특수한 상황에서는 비효율적이다. 따라서 본 논문에서는 렌즈 왜곡에 적응적인 탐색 영역(search region)을 갖는 새로운 BMA를 제안한다. 이는 렌즈 왜곡의 특성을 분석하여 렌즈 왜곡이 많이 일어나는 부분만을 특별히 정해서 대응 화소를 찾으므로 찾는 속도는 현저히 증가하고 성능은 기존의 BMA와 같은 성능을 보인다. 이러한 알고리즘은 하드웨어 구현에도 많은 도움이 될 것이다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.81-81
• /
• 2003

최근 유한요소법을 이용하여 절삭가공을 해석하는 연구가 많이 발표되고 있다. 이 때 가장 문제되는 점이 피삭재에서 칩으로 분리하는 조건이다. 일반적으로 칩 분리 조건이라 일컬어지는 이 조건을 어떻게 설정할 것인가에 대해 현재까지도 많은 연구가 이루어지고 있다. 현재까지 제시된 칩 분리 판별 조건은 두 가지 유형 - 기하학적, 물리적으로 나눌 수 있다. 기하학적 칩 분리 조건은 공구 끝단과 바로 앞 요소의 거리를 기준으로 정해진 특정한 값에 도달하면 요소가 분리되는 혹은 없어지는 방법을 이용하는 것이며(Fig. 1 참조), 물리적 칩 분리 조건은 요소 내의 소성변형률 혹은 변형률 에너지 밀도함수 등의 값을 기준으로 분리시키는 방법이다. 본 연구에서는 상용 유한요소 해석 프로그램인 ANSYS를 이용하였으며 이 프로그램에서 제공하는 element birth/kill 기법을 이용하여 기하학적 판별조건에 도달하면 공구 끝단 앞의 요소가 사라지는 방법을 취하였다. Fig. 2는 절삭가공을 위한 유한요소 모델링을 나타낸다. 칩-공구 접촉 부위에 접촉요소를 사용하였으며, 피삭재의 왼쪽과 아래쪽 부위는 각각 변위구속을 하였다. 공구의 이동은 변위경계조건의 값을 변화시킴으로써 구현하였다. 절삭력을 비교함으로써 해석결과의 타당성을 검토하였으며, 피삭재 내의 응력, 변형률 분포 등을 살펴보았다.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2003.11a
• /
• pp.285-289
• /
• 2003

본 논문은 컬러 입력 영상에서 검출된 얼굴 영역 내의 홀(hole)들간의 기하학적 구조를 이용하여 포즈를 추정하는 방법을 제시한다. 얼굴 영역 검출에서는 특징값 기반의 알고리즘 중 피부색 분포를 이용하는 방법을 적용하며, 이 때 발생하는 조명에 의한 열화를 제거한다. 본 논문에서는 TSL 색상 모델을 사용하고, 조명에 의해 너무 밝게 표현되는 부분의 피부값을 조정함으로써 조명에 대한 보정을 실시한다. 그런 다음, 얼굴 영역 안에서 찾은 홀을 피부영역이 아닌 얼굴 구성요소(양눈, 입)로 가정하여, 후보 구성요소들의 기하학적 구조를 이용해 다양한 포즈의 입력 영상에 대한 포즈를 추정한다. 추정된 값은 향후 다양한 포즈에 대한 특징점 추출이나 얼굴 인식에 활용될 수 있다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.1 no.1
• /
• pp.189-200
• /
• 1998

본 연구에서는 얇은 마레이징강으로 제작된 천마 연소관에 브라켓이 용접되어 비행 날개를 볼트로 체결한 경우, 압력과 공력하중에 의해 브라켓 부위에 집중되는 응력의 해석기법을 정립하기 위하여 선형해석과 기하학적 비선형 해석을 수행하였다. 높은 압력에 의해 발생한 얇은 연소관의 면내 응력이 구조물의 강성을 증가시키는 응력의 강성보강효과(stress stiffening effect)를 고려한 기하학적 비선형 해석을 수행하여 선형해석 결과와 비교하였으며, 압력과 공력하중을 동시에 적용할 수 있는 복합하중시험기로 변형률을 측정하여 해석치의 정확성을 검토하였다. 얇은 연소관에 압력과 공력하중이 동시에 작용하는 경우는 응력의 강성보강효과를 고려한 기하학적 비선형 해석을 수행함으로써 보다 정확한 응력을 구할 수 있다는 결론을 얻었다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.3
• /
• pp.499-505
• /
• 2003

This paper proposes methods to extract face elements and facial characteristics points for face recognition. We select a candidate region of the face elements with geometrical information between them inside the extracted face region with skin color and extract them using their inherent features. The facial characteristics to be applied to face recognition is expressed with geometrical relation such as distance and angle between the extracted face elements. Experiment results shows good performance to extract of face elements.