• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.199-199
• /
• 2019

친환경적인 산업기술인 초미세기포(Ultra Fine Bubble, 이하 UFB) 제조 기술은 농업, 수처리, 그리고 환경재생 등 다양한 분야에서 적용되고 있다. UFB는 1,000nm 이하의 크기를 가진 기포로서 용존산소를 통한 농작물 성장 촉진 및 수중의 대장균 및 세균제거 등 다양한 성질을 지니고 있다. 본 연구는 기존의 방식과는 다르게 자왜현상을 메카니즘으로 갖는 타격식으로 제조된 UFB 생성장치를 통해 생성된 200nm이하의 크기를 가진 UFB를 실제 딸기 농장에 적용하여 딸기의 성장을 모니터링하고 살균 성능을 가진 화학제품과 UFB를 대장균에 적용하여 대장균 제거효율을 비교하였다. 딸기농장에 기존에 사용되던 지하수 대신 UFB를 주입하여 딸기성장 초기단계의 DO농도를 측정하고 딸기 생식단계에 산소포화도에 대한 질산염의 농도를 측정하여 상관관계를 분석하였으며 각각의 딸기 열매를 수확하여 무게를 비교하였다. 또한 대장균이 함유되어있는 대변을 채취하여 살균 성능을 가진 화학제품과 UFB수를 각각 대장균이 포함된 실험원수와 반응시켜 배양하고 검출된 대장균 개체 수에 확인하여 제거효율을 비교분석 하였다. 딸기성장 초기단계의 DO농도 측정결과 DO농도가 6~9ml/L로 높게 유지되고 있음을 확인하였고 딸기 생식단계에서 산소포화도가 일정하게 유지되고 있음에 따라 질산염의 농도가 점차 감소하는 것을 확인하였다. 또한 수확한 열매의 무게는 각각 37g, 19g으로 UFB수를 통해 재배된 딸기가 약 2배 이상 높은 것으로 나타났다. 이와 같은 결과는 수중의 용존산소가 딸기 성장 초기에 뿌리의 발육에 긍정적인 영향을 미치고 질산염을 원활하게 섭취하게 하여 딸기의 성장이 촉진되었고 열매의 무게가 증가하였다고 판단된다. 또한 대장균이 함유된 원수, 원수+화학제품, 원수+UFB를 접종하여 대장균과 반응시켜 배양하여 대장균 개체 수를 확인한 결과, 원수의 경우 약 600개의 대장균의 개체수가 나타났고, 원수+화학제품의 경우 검출된 대장균의 개체 수는 약 300개 정도로 나타났다. 이를 희석한 비율을 계산하여 대장균 개체 수를 나타내면 원수 약 6000개/ml, 원수+화학제품 약 6000개/ml로 비슷하게 나타난다. 반면, 원수+UFB 경우 검출된 대장균의 개체 수는 1개로 희석한 비율을 계산하여 대장균 개체 수를 나타내면 약 20개/ml로 나타난다. 이와 같은 결과를 통해 UFB는 99.9%의 대장균 제거효율을 보였으며, 화학제품은 대장균 제거효율을 보이지 않았다. 따라서 화학제품은 항균기능은 작용하지만 살균기능은 거의 없다고 판단하였고, UFB의 경우 기포가 소멸하면서 발생되는 초고온, 초고압을 형성하여 주변에 존재하는 대장균을 제거하였거나, 기포가 소멸할 때 발생되는 OH 라디칼을 통해 대장균의 세포를 화학적으로 분해시켜 대장균을 제거하였다고 보인다.

• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.67.2-67.2
• /
• 2005

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.4 no.3
• /
• pp.96-104
• /
• 1980

유압이 변화할 때 증기기포의 크기를 구하는 공식을 제시하였다. 이 공식은 변화하는 유압하에서 기포의 크기를 상한과 하한으로 표시한 Hopper, Faucher 및 Eidlitz가 제시한 공식과, Plesset과 Zwick이 해결한 일정유압하에서 성립하는 기포에 관한 간단한 asymptotic 공식을 모두 대체 하기 위한 것이다. 여기에 제시한 새로운 공식의 정확성을 검토하기 위하여 Hooper, Faucher 및 Eidlitz가 보고한 실험결과와 이론적으로 얻은 결과와를 비교하여 보았다.

• Korean Journal of Crystallography
• /
• v.5 no.2
• /
• pp.67-77
• /
• 1994

From the Y3-3xNd3xAl5O12single crystals grown by the Czochralski technique, various types of defects were detected and 1) the reason of opical in homogeneous phases, 2) the mechanism of formation of the iridum metal inclusions accompanying bubbles, and 3) the mechanism of formation of the core and facet were analysed After preparing the wafers of the <111> growth parallel, defscts were observed by the polarising microscope using a photoelasic effect and then some images of stress-birefringence were compared to their etch Pits patterns.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.3
• /
• pp.702-715
• /
• 1990

This paper describes behaviors of two-phase open channel flow inside the flash chamber of a horizontal Multi-Stage-Flash evaporator numerically along with the experimental observations. Bubble trajectories and the velocity and temperature distributions of the liquid phase were predicted by using the particle-source-in-cell(PSI-Cell) method with the appropriate bubble motion/growth equations. Size and number of bubble nuclei embedded in the incoming liquid(brine) were taken into account as important parameters in addition to the conventional ones such as the velocity, degree of inlet superheat, inlet opening height, and the liquid level. Bubble motions, which are unsteady, appeared to be mostly determined by the buoyancy and the drag forces. The calculations, though a number of simplifying assumptions were made, reasonably simulated the hydrodynamic behaviors of the two-phase horizontal stream observed in the experiments. The simulated temperature distributions also agreed fairly well with the other's measurements. Non-equilibrium allownaces, evaluated from the simulated temperature distributions, were within the range of those obtained from the existing correlations, and reduced with the increases of the number and size of incoming bubble nuclei due to vigorous flashing.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.2 no.2
• /
• pp.1-1
• /
• 1992

YIG(Yttrium Iron Garnet) single crystals were grown by FZ(Floating Zone) method. Since YIG melts incongruently, TSFZ(Traveling Solvent Floating Zone) method which was modified FZ was applied to grow YIG single crystals. The optimum growth condition were growth rate Imm/hr, counter-rotation 30rpm and oxidized atmosphere was necessary to sintering and growth process. The quality of grown crystals depended on the degree of sintering. The voids were generated by the reaction of Fe ions with oxygen and the density of voids was increased with the growth rate increased. When the growth rate was more than 1.5mm/hr, the cellular growth occured and the density of dislocation was increased at the periphery of crystals. Also, secondary phases of orthoferrite(YFe$O_3$)compost ion were observed in the grown crystal.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.2 s.233
• /
• pp.169-179
• /
• 2005

Nucleate boiling experiments on heating surface of constant wall temperature were performed using R113 for almost saturated pool boiling conditions. A microscale heater array and Wheatstone bridge circuits were used to maintain a constant wall temperature condition of heating surface and to measure the heat flow rate with high temporal and spatial resolutions. Bubble images during the bubble growth were taken as 5000 frames per second using a high-speed CCD camera synchronized with the heat flow rate measurements. The bubble growth behavior was analyzed using the new dimensionless parameters for each growth regions to permit comparisons with previous experimental results at the same scale. We found that the new dimensionless parameters can describe the whole growth region as initial and later (thermal) respectively. The comparisons showed good agreement in the initial and thermal growth regions. In the initial growth region including surface tension controlled, transition and inertia controlled regions as divided by Robinson and Judd, the bubble growth rate showed that the bubble radius was proportional to $t^{2/3}$ regardless of working fluids and heating conditions. And in the thermal growth region as also called asymptotic region, the bubble showed a growth rate that was proportional to $t^{1/5}$, also. Those growth rates were slower than the growth rates proposed in previous analytical analyses. The required heat flow rate for the volume change of the observed bubble was estimated to be larger than the heat flow rate measured at the wall. Heat, which is different from the instantaneous heat supplied through the heating wall, can be estimated as being transferred through the interface between bubble and liquid even with saturated pool condition. This phenomenon under a saturated pool condition needs to be analyzed and the data from this study can supply the good experimental data with the precise boundary condition (constant wall temperature).

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.30 no.3
• /
• pp.35-42
• /
• 2001

배관 내에 압축공기를 주기적으로 분사하여 맥동현상이 일어나도록 하면서 기포를 발생시켜 기포가 관의 내벽에서 성장하여 파괴될 때 관내에 부착된 이물질을 제거할 수 있고, 또한 세척효과를 높이기 위하여 관의 벽면에 접촉하면서 배출되는 과정에서 이물질을 제거할 수 있는 장치를 이용한 세척방법의 적용성에 대해서 고찰하고자 한다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.11 s.254
• /
• pp.1107-1116
• /
• 2006

The droplet ejection process driven by an evaporating bubble in a thermal inkjet printhead is investigated by numerically solving the conservation equations for mass, momentum and energy. The phase interfaces are tracked by a level set method which is modified to include the effect of phase change at the interface and extended for multiphase flows with irregular solid boundaries. The compressibility effect of a bubble is also included in the analysis to appropriately describe the bubble expansion behaviour associated with the high pressure caused by bubble nucleation. The whole process of bubble growth and collapse as well as droplet ejection during thermal inkjet printing is simulated without employing a simplified semi-empirical bubble growth model. Based on the numerical results, the jet breaking and droplet formation behaviour is observed to depend strongly on the bubble growth and collapse pattern. Also, the effects of liquid viscosity, surface tension and nozzle geometry are quantified from the calculated bubble growth rate and ink droplet ejection distance.

• Journal of the Korean Solar Energy Society
• /
• v.30 no.5
• /
• pp.93-99
• /
• 2010

Nucleate pool boiling experiments with constant heat flux condition were performed using pure R113 for various channel heights under saturated pool condition. A circular heater of 1mm diameter, with artificial cavity in the center, fabricated using MEMS technique and the high-speed controller were used to maintain the constant heat flux. Images of bubble growth were taken at 5,000 frames per second using a high-speed CCD camera. The bubble geometry was obtained from the captured bubble images. The effects of channel height on the bubble growth behaviors were analyzed as dimensional scales for the initial and thermal growth regions. The parameters for the bubble growth behaviors were bubble radius, bubble growth rate, and bubble shapes. These phenomena require further analysis for various surface angles, but this study will provide good experimental data with constant heat flux boundary condition for such works.