• The Korean Society of Law and Medicine
• /
• v.22 no.4
• /
• pp.37-55
• /
• 2021

On March 19, 2021, the Korean Bioethics Association and related academic circles published a joint statement criticizing the partial revision of Infectious Disease Control And Prevention Act. However, according to the Bioethics And Safety Act of Korea, research conducted by the state or local governments for public welfare is excluded from human subjects research project. In addition, since the Korean legal system is not based on the dichotomy between research and surveillance, the discussion of the US Common Rule cannot be directly applied to Korea. For the harmonious operation of the state's duty to manage infectious diseases and the Institutional Review Boards, institutional alternatives should be prepared in consideration of the following issues. First, the related academic community should first pay attention to the problems of the current laws in Korea. Second, it should be understood that the state is carrying out many tasks without the consent of the parties in order to fulfill its duty to manage infectious diseases. Third, when presenting institutional alternatives, it is necessary to consider the feasibility of implementation in Korea. An in-depth discussion of the institutional alternatives by the Medical Law Society and other related academic circles is necessary.

• Journal of the Korean Society of Radiology
• /
• v.16 no.5
• /
• pp.595-602
• /
• 2022

This study tried to suggest the most efficient learning rate for accurate and efficient automatic diagnosis of medical images for chest X-ray pneumonia images using deep learning. After setting the learning rates to 0.1, 0.01, 0.001, and 0.0001 in the Inception V3 deep learning model, respectively, deep learning modeling was performed three times. And the average accuracy and loss function value of verification modeling, and the metric of test modeling were set as performance evaluation indicators, and the performance was compared and evaluated with the average value of three times of the results obtained as a result of performing deep learning modeling. As a result of performance evaluation for deep learning verification modeling performance evaluation and test modeling metric, modeling with a learning rate of 0.001 showed the highest accuracy and excellent performance. For this reason, in this paper, it is recommended to apply a learning rate of 0.001 when classifying the presence or absence of pneumonia on chest X-ray images using a deep learning model. In addition, it was judged that when deep learning modeling through the application of the learning rate presented in this paper could play an auxiliary role in the classification of the presence or absence of pneumonia on chest X-ray images. In the future, if the study of classification for diagnosis and classification of pneumonia using deep learning continues, the contents of this thesis research can be used as basic data, and furthermore, it is expected that it will be helpful in selecting an efficient learning rate in classifying medical images using artificial intelligence.

• Composites Research
• /
• v.34 no.6
• /
• pp.357-372
• /
• 2021

The energy harvesting device is known to be promising as an alternative to solve the resource shortage caused by the depletion of petroleum resources. In order to overcome the limitations (environmental pollution and low mechanical properties) of piezoelectric elements capable of converting mechanical motion into electrical energy, many studies have been conducted on a polymer matrix-based composite piezoelectric energy harvesting device. In this paper, the output performance and related applications of the reported piezoelectric composites are reviewed based on the applied materials and processes. As for the piezoelectric fillers, zinc oxide, which is advantageous in terms of eco-friendliness, biocompatibility, and flexibility, as well as ceramic fillers based on lead zirconate titanate and barium titanate, were reviewed. The polymer matrix was classified into piezoelectric polymers composed of polyvinylidene fluoride and copolymers, and flexible polymers based on epoxy and polydimethylsiloxane, to discuss piezoelectric synergy of composite materials and improvement of piezoelectric output by high external force application, respectively. In addition, the effect of improving the conductivity or the mechanical properties of composite material by the application of a metal or carbon-based secondary filler on the output performance of the piezoelectric harvesting device was explained in terms of the structure of the composite material. Composite material-based piezoelectric harvesting devices, which can be applied to small electronic devices, smart sensors, and medicine with improved performance, can provide potential insights as a power source for wireless electronic devices expected to be encountered in future daily life.

• Journal of Korea Entertainment Industry Association
• /
• v.15 no.7
• /
• pp.181-192
• /
• 2021

This study was conducted to investigate the effects of a participatory rehabilitation program on sit-rise and rise-to-walk test performances, and perception and motor skills in adults with medically vulnerable individuals and, adults with developmental disabilities in particular. Seventeen adults with developmental disabilities participated in a participatory rehabilitation program using resistance bands and exercise balls, for 60 minutes once weekly over 13 weeks. Their performances were measured before and immediately after the intervention, and 12 weeks after. The findings were as follows. In the sit-rise test, the number of times rising from sitting posture increased after the intervention versus before, but the difference was not statistically significant. In the rise-to-walk test, the performance showed statistically significant difference over time, and the post-hoc test showed a significant effect after the intervention versus before. There was no significant difference in perception and motor skills. In sum, the participatory rehabilitation program positively influenced dynamic balancing related to functional activities but had no significant effect on perception and motor skills, which is related to motor control and motor learning. It is suggested that to increase the participation in community activities, reduce fall risk, and improve dynamic balancing abilities in adults with developmental disabilities, participatory rehabilitation programs should be utilized to promote the physical wellbeing.

• Journal of The Korean Society of Integrative Medicine
• /
• v.10 no.4
• /
• pp.229-240
• /
• 2022

Purpose : In this study, using Oyster Shell Thermal Therapy for metabolic diseases, we analyzed the effect of immune and inflammation-related variables and respiratory health-related variables of test subjects to verify the effect of improving respiratory health. Methods : In this study, 26 patients with metabolic diseases were divided into an experimental group (N=13) and a control group (N=13). After Oyster Shell Thermal Therapy (four weeks/three times a week/1 hour per time), metabolic disease-related variables and immune and respiratory health-related variables were measured and compared between the two groups. The conclusion of this study is as follows: Results : After the four-week Oyster Shell Thermal Therapy, in terms of changes in the metabolic disease-related variables, the control group exhibited a higher increase in TC and LDL-C levels than the experimental group. In the case of glucose, the experimental group showed a decrease after the experiment (p<.05). After the four-week thermotherapy, a statistically significant interactive effect occurred in natural killer (NK) cells among the immune-related variables. According to the results of a post-experimental analysis, the control group showed a higher decrease in NK cells than the experimental group (p<.05). After the 4-weeks thermotherapy, the experimental group showed a greater increase in maximum oxygen intake of the respiratory health-related variables than the control group. Conclusion : Based on a comprehensive review of the study results, the subjects who underwent the four-week Oyster Shell Thermal Therapy exhibited positive physical changes in metabolic disease-related variables as well as immune and respiratory health-related variables, which demonstrates the effectiveness of Oyster Shell Thermal Therapy on immune and respiratory health. Accordingly, it is recommended to conduct long-term Oyster Shell Thermal Therapy with various models in terms of the size and shape.

• Journal of the Korean Society of Radiology
• /
• v.16 no.1
• /
• pp.15-23
• /
• 2022

3D printing technology is being used in various fields such as medicine and biotechnology, and materials containing metal powder are being commercialized through recent material development. Therefore, this study intends to analyze the photon spectrum during added filtration using 3D printing material during diagnostic X-ray examination through simulation. Among the Monte Carlo techniques, MCNPX (ver. 2.5.0) was used. First, the appropriateness of the photon spectrum generated in the simulation was evaluated through SRS-78 and SpekCalc, which are X-ray spectrum generation programs in the diagnostic field. Second, photon spectrum the same thickness of Al and Cu filters were obtained for characterization of 3D printing materials containing metal powder. In addition, the total photon fluence and average energy according to changes in tube voltage were compared and analyzed. As a result, it was analyzed that PLA-Al required about 1.2 ~ 1.4 times the thickness of the existing Al filter, and PLA-Cu required about 1.4 ~ 1.7 times the thickness of the Cu filter to show the same degree of filtration. Based on this study in the future, it is judged that it can be utilized as basic data for manufacturing 3D printing additional filters in medical fields.

• Journal of the Korean Society of Radiology
• /
• v.16 no.4
• /
• pp.411-417
• /
• 2022

This study aimed to learn and evaluate the effectiveness of VGGNet in the detection of pulmonary emphysema using low-dose chest computed tomography images. In total, 8000 images with normal findings and 3189 images showing pulmonary emphysema were used. Furthermore, 60%, 24%, and 16% of the normal and emphysema data were randomly assigned to training, validation, and test datasets, respectively, in model learning. VGG16 and VGG19 were used for learning, and the accuracy, loss, confusion matrix, precision, recall, specificity, and F1-score were evaluated. The accuracy and loss for pulmonary emphysema detection of the low-dose chest CT test dataset were 92.35% and 0.21% for VGG16 and 95.88% and 0.09% for VGG19, respectively. The precision, recall, and specificity were 91.60%, 98.36%, and 77.08% for VGG16 and 96.55%, 97.39%, and 92.72% for VGG19, respectively. The F1-scores were 94.86% and 96.97% for VGG16 and VGG19, respectively. Through the above evaluation index, VGG19 is judged to be more useful in detecting pulmonary emphysema. The findings of this study would be useful as basic data for the research on pulmonary emphysema detection models using VGGNet and artificial neural networks.

• Therapeutic Science for Rehabilitation
• /
• v.12 no.3
• /
• pp.19-32
• /
• 2023

Objective : The purpose of this study was to investigate the educational status, knowledge, awareness, and readiness for dysphagia therapy among university occupational therapy students. Methods : One hundred and five online questionnaires completed by senior-year students at an occupational therapy university were analyzed. The questionnaire assessed the educational status, knowledge, awareness, and readiness for dysphagia therapy. Descriptive statistics and differences between those with and without practical experience were analyzed. The relationships among educational status, knowledge, and readiness were analyzed. Results : Independent opening of the dysphagia therapy class (69.5%) and experience in dysphagia practice were high (79.0%). Dysphagia education and knowledge in university and practice were moderate and item scores were higher for university education. Knowledge of adult dysphagia therapy was higher than that of pediatric dysphagia therapy. Scores on awareness, knowledge, and readiness for dysphagia therapy were significantly higher among students with practical experience. Conclusion : Education and knowledge of dysphagia therapy were moderate. Knowledge and readiness in adults are higher than in children. Systematic dysphagia therapy education in university and associated practices are needed to enhance the specialty of dysphagia therapy.

• Journal of the Korean Society of Radiology
• /
• v.17 no.4
• /
• pp.557-564
• /
• 2023

In this study, 3D printing technology was used to compensate for the shortcomings of the use of lead, which has proven to have excellent shielding performance, and to control unnecessary human exposure. 3D printers can implement three-dimensional shapes and can immediately apply individual ideas, which has great advantages in maintaining technology supplementation while reducing the cost and duration of prototyping. Among the various special 3D printers, the FDM method was adopted, and the filament used for output was manufactured using a research extruder by mixing two materials, PLA (Poly-Lactic-Acid) and tungsten. The purpose was to verify the validity through dose evaluation and to provide basic information on the production of chapezones of various materials. The mixed filament was implemented as a morphological shield. Filaments made of a research extruder by mixing PLA and tungsten were divided into 10 %, 20 %, 30 %, 40 %, and 50 % according to the tungsten content ratio. Through the process of 3D Modeling, STL File storage, G-code generation, and output, 10 cm × 10 cm × 0.5 cm was manufactured, respectively, and dose and shielding ability were evaluated under the conditions of tube voltages of 60 kVp, 80 kVp, 100 kVp, 120 kVp, and tube currents of 20 mAs and 40 mAs.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.5
• /
• pp.203-213
• /
• 2019

The purpose of this study was to compare the anxiety, sexual attitudes, and sexual behavior according to smartphone use and contacts with obscene materials. 110 university students surveyed demographic characteristics, smartphone use, contacts with obscene materials, anxiety, sexual attitudes, and sexual behavior, and analyzed 102 questionnaires except missing and incomplete responses. The collected data were analyzed by independent t-test or chi-square test. Men were significantly more likely to have contacts with obscene materials, sexual attitudes, and sexual behavior than the women (p<.05). In type of residence, boarding room or lodging was significantly higher at time of smartphone use, anxiety, and sexual behaviors than the home (p<.05). There was no difference in variables according to religion (p>.05). There was no difference in variables according to the level of academic achievement (p>.05). Time of smartphone use over 3 hours was significantly higher for contacts of obscene materials, anxiety, and sexual attitudes and behaviors than less 3 hours (p<.05). Higher levels of time of contacts with obscene materials were significantly higher in anxiety and sexual behaviors than lower level (p<.05). The results of this study can be used as a basis for the development of intervention programs for those who are experiencing excessive smartphone use and contacts with obscene materials.