• Proceedings of the KSCN Conference
• /
• 2003.11a
• /
• pp.1073-1074
• /
• 2003

본 연구는 고학력 중년 여성을 대상으로 취업 여부에 따른 영양섭취 상태의 차이를 분석하여 고학력 중년 여성의 영양 및 건강관리를 위한 대책 마련의 기초자료로 활용하고자 시행되었다. 연구 대상자의 선정은 유의추출 방법으로 전업 여성은 고학력자 비율이 높은 대전시의 일정 지역에 거주하는 기혼여성으로 하였고, 취업여성은 여러 직업의 특성으로 인한 교란(confounding)을 줄이기 위하여 고학력 여성의 비율이 높은 기혼의 교사로 한정하였다. 연령에 의한 교란을 방지하기 위하여 연령대별로 동일 비율로 무작위 추출하여 전업여성 250명, 취업여성 236명을 대상으로, 24시간 회상법을 이용하여 조사 전일 하루동안의 식이 섭취 내용을 개별 면담으로 조사하였다. 1일 영양소 섭취 조사 결과 취업여성은 전업여성에 비해 인, 비타민 B$_1$, B$_2$를, 전업여성은 취업여성에 비해 지방 및 동물성 지방, 나트륨, 비타민 C, 엽산을 많이 섭취하고 있었다. P/M/S비는 전업여성 1/1.19/1.05, 취업여성 l/l.05/0.87로 나타나 취업여성이 전업여성에 비해서, 그리고 한국인 영양권장량의 기준(1/1/1)에 비해서 포화지방의 비가 낮았다. 또한 지방 에너지 구성비도 전업여성(24.38%)이 취업여성(23.29%)에 비해 높았고, 총 열량에 대한 동물성 지방의 섭취비율이 전업여성 12.44%, 취업여성 11.46%으로 나타나 전업여성이 취업여성에 비해 동물성 지방, 포화지방비, 지방에너지 구성비가 모두 높았다. 영양권장량에 대한 영양소 섭취 백분율에서 전업여성과 취업여성 모두 칼슘과 아연을 권장량에 비해 낮게 섭취하고 있었고, 질적 영양지수(INQ)도 두 군 모두에서 칼슘이 가장 낮게 나타났다. 인의 영양밀도(Nutrient Density)가 취업주부에서 높았던 점 외에는 영양밀도와 영양소 적정섭취비(NAR) 모두에서 비타민 B$_1$, B$_2$가 전업여성에 비해 취업여성이, 비타민 C가 취업여성에 비해 전업여성이 더 높았다. 한편 두 군 모두 INQ가 가장 높은 영양소는 인이었고, INQ가 가장 낮은 영양소는 칼슘으로 나타났으며, INQ가 1 미만인 영양소는 칼슘과 함께 철분으로 나타났다. 이는 1998년도 국민건강영양조사 결과에서 45세 이상 여성의 경우 관절염, 요통.좌골통, 디스크 등 근골격계질환 유병률이 남자보다 3배정도 높게 나타난 결과에 비추어볼 때 이들 관련 영양소에 대한 섭취 방안 지도의 필요성을 제시하고 있다. 결론적으로 고학력 중년 여성중 전업여성에 대해서는 지방 특히 동물성 지방 식품 섭취에 대한 적절한 영양교육과 식사관리 지도가 요구된다 하겠다. 또한 고학력 중년 여성은 취업 여부에 관계없이 칼슘과 철분이 많이 함유된 식품으로 식사량을 증가시켜 주는 영양 지도 및 영양 보강 대책이 요구되며, 칼슘과 인의 적정섭취비가 되도록 인의 섭취를 낮추는 식생활 지도가 필요하다.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.5
• /
• pp.79-86
• /
• 2009

With the substantial increase of the size of structure, the management of excavation becomes more difficult. Therefore, massive collapses which are related to retaining wall recently increase. However, since the study on measuring and monitoring the pre-stressing force of anchor is insufficient, behavior of anchor may not be predicted and monitored appropriately by the existing strain gauge and load cell type monitoring system. FBG Sensor, which is smaller than strain gauge and has better durability and does not have a noise from electromagnetic waves, is adapted to measure the strain and pre-stressing force of 7-wire strand, so called smart tendon. A series of pullout tests were performed to verify the feasibility of smart tendon and find out the load transfer mechanism around the steel wire tendon fixed to rock with grout. Distribution of measured strains and estimated shear stresses are compared with those predicted by theoretical solutions. It was found that developed smart tendon can be used effectively for measuring strain of 7-wire strand anchor and theoretical solutions underestimate the magnitude of shear stress and load transfer depth.

• Journal of Korean Philosophical Society
• /
• v.142
• /
• pp.295-321
• /
• 2017

This paper discusses Hegel's concept of Art criticism, focusing on the article "${\ddot{U}}ber$ die Bekehrten" in 16. Vol. of Hegel's Gesammelte Werke. Hegel is a theorist of the system of art, but also an art critic who actively participated in popular art practice. Until now, Hegel has been interpreted mainly as a theorist who usually constitutes the system of art. According to many interpretations, Hegel has been criticized for his theories frame interpretation of the Artwork compulsorily. But in this article we see another aspect of Hegel as an art critic. First, in this article Hegel shows as an art critic how romanticists distort the work with an emphasis on the theory. Hegel argues in his article written in early 1826 that romantic ironic theory does not help at all in understanding the "die Bekehrten" of Laupach. Whereas ironic theory emphasizes the contradiction between character and its action as the essential value of the work, Hegel interprets that the comic is at the center of the work, which lets the unessential sides of the unified character disappear, so that the unity of the character expresses itself. Hegel also interprets that the theory of irony represents the work of art for the scholars, which harms the objectivity of artwork and defends the artwork for the public. Second, Hegel began to apply the achievement of his criticism to his aesthetic lectures. Since 1826 Hegel has focused intensively on discussing two concepts, romantic irony and 'artwork for the public' in his aesthetics lectures. Thus, this article provides a basis for Hegel 's criticism of ironic theory after 1826 and the concept of artwork for the public. In this respect, we can confirm that Hegel has reinforced and extended his theories through his practice of criticism of concrete works of art rather than imposing systematic theories upon art criticism

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.480-480
• /
• 2018

전 세계적으로 자연 친화, 하천생태계 보전, 친수하천 등을 조성하기 위한 대대적인 하천 정비사업이 활발히 진행 중에 있다. 최근 홍수로 인한 제방 붕괴에 대응하기 위한 제방의 안정화 및 개선을 위한 방법으로 기존의 시멘트와 같은 혼합물질을 사용하지 않고 환경 친화적이고 지속 가능한 대안에 대한 수요가 증가되고 있는 추세이며 현재 노후화 된 불안정 제방에 대한 보강대책을 수립해나가는 과정으로써 친환경 신소재를 활용하여 제방을 보호하는 연구가 수행되고 있다. 제방사면에 적용되는 신소재는 바이오폴리머를 활용한 재료로써 공동연구기관 카이스트에서 개발된 환경 친화적인 물질로 미생물에 의해 유도된 고인장 및 인체 무해성 등의 특성을 갖고 있으며 경제적 타당성인 측면에서 시멘트와 비교 분석 되어야 하고 실제 현장에서의 적용 가능성, 신뢰성 및 내구성 검토 등 성능을 보장하기 위한 지속적인 연구가 필요한 상황이다. 이에 본 안동하천실험센터에서는 중규모 제방을 직접 제작하여 수리모형실험을 통한 친환경 신소재 활용 제방의 안정성 및 성능 평가를 실시하였다. 수리실험 조건은 카이스트에서 제시된 레시피를 기반으로 먼저 분말형태의 바이이폴리머를 물과 희석하여 만들어진 바이오폴리머 용액을 흙과 혼합한 뒤 제방표면에 직접 미장작업을 수행하여 실험조건에 따라 일정한 두께(1cm, 3cm, 5cm)로 피복하였다. 이후 월류 붕괴 실험이 가능한 3 - 5일 정도의 양생기간을 거쳐 실험을 진행하였다. 실험결과는 다수의 고프로(GoPro) 및 비디오 카메라 등 다양한 영상장치를 이용하여 픽셀기반의 영상분석기법을 활용한 시간 흐름에 따른 제방 사면에서의 붕괴규모를 산정하여 신소재의 피복 두께에 따른 제체의 붕괴 거동 및 안정성을 평가하였으며, 또한 제방 파괴부에서의 흐름 상황 및 유속이 붕괴 발달에 미치는 영향을 분석하기 위하여 PIV 분석을 실시하였다. 이번 연구의 최종목표는 지속적인 예비실험을 수행하여 월류 및 침투, 파이핑 등 파괴 인자 별 신소재의 성능 개선 및 개발된 새로운 공법에 대한 효과 검토를 통한 최적안을 도출함으로써 향후 실규모 실험실증을 통한 신소재 시공 및 공법에 대한 현장적용 가능성 검증을 거쳐 최종적으로 신소재 제방 공법 설계 기술, 신소재 및 공법 표준안, 제방공법 안정성 평가 가이드라인 등을 제시하고자 하며, 이러한 실험데이터를 축적함으로써 실제 제방 붕괴 시 비상대처계획 수립에 필요한 기초자료로 활용이 가능할 것으로 사료된다.

• Fire Science and Engineering
• /
• v.33 no.2
• /
• pp.145-154
• /
• 2019

The purpose of this study is to analyze the self-status of fire service personnel to identify their effect on self-efficacy and job satisfaction, and to improve the performance of their tasks in the field and perform their tasks efficiently. A survey of 177 current firefighters in the southern city of Gyeonggi Province conducted a correlation analysis and regression analysis through SPSS 22.0. The first study found that in relation to the self-status factor and the self-efficacy factor of firefighting services, the self-efficacy is rather high and the self-regulating effect is very high. Second, the effects of the self-status factor on the self-efficacy were significant in order of type Adult (A), type Free Child (FC), and type Adapted Child (AC). Third, analysis of correlation between self-status factors and job satisfaction factors showed inadequate correlation in all job satisfaction factors for Critical Parent (CP) types, and static correlation in all job satisfaction for Nurturing Parent (NP) types. Type Adapted Child (AC) was less satisfying to itself, to itself, to pay, to promote, to co-workers. Thus, the current strategic approach based on rationality needs to be strengthened by lowering the authority of the Critical Parent (CP) function in terms of self-status factors and enhancing the Adapted Child (AC) function in the lower satisfaction level of the parent.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.5
• /
• pp.627-635
• /
• 2019

A programmable drone is a drone developed not only to experience the basic principles of flight but also to control drones through Arduino-based programming. Due to the nature of the training drones, the main users are students who are inexperienced in controlling the drones, which often cause frequent collisions with external objects, resulting in high damage to the drones' frame. In this study, the structural stability of the drone was evaluated by means of a structural dynamics based collision simulation for educational drone frame. Collision simulations were performed on three cases according to the impact angle of $0^{\circ}$, $+15^{\circ}$ and $-15^{\circ}$, using an analytical model with approximately 240,000 tetrahedron elements. Using ANSYS LS-DYNA, which provides excellent functions for the simulation of the dynamic behavior of three-dimensional structures, the stress distribution and strain generated on the drone upper, the drone lower, and the ring assembly were analyzed when the drones collided against the wall at a rate of 4 m/s. Safety factors resulting from the equivalent stress and the yield strain were calculated in the range of 0.72 to 2.64 and 1.72 to 26.67, respectively. To ensure structural stability for areas where stress exceeds yield strain and ultimate strain according to material properties, the design reinforcement is presented.

• Journal of Korean Society of Disaster and Security
• /
• v.12 no.1
• /
• pp.45-56
• /
• 2019

In this study, the seismic risk has been evaluated by setting the bedrock acceleration to 0.154g which, was taking into consideration that the earthquake return period for the buried electric power tunnels in the metropolitan area to be 1,000 years. In this case, the risk assessment during the earthquake was carried out in three stages. In the first stage, the site classification was performed based on the site investigation data of the target area. Then, the LPI(Liquefaction Potential Index) was applied using the site amplification factor. After, candidates were selected using a hazard map. In the second stage, risk assessment analysis of seismic response are evaluated thoroughly after the recalculation of the LPI based on the site characteristics from the boring logs around the electric power area that are highly probable to be liquefied in the first stage. The third Stage visited the electric power tunnels that are highly probable of liquefaction in the second stage to compensate for the limitations based on the borehole data. At this time, the risk of liquefaction was finally evaluated based off of the reinforcement method used at the time of construction, the application of seismic design, and the condition of the site.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.5
• /
• pp.281-302
• /
• 2021

Railway projects have been consistently increasing in Korea. In relation to this trend, the mechanized tunneling using Tunnel Boring Machine (TBM) is preferably applied for mining urban areas and passing under rivers. The TBM tunneling under difficult grounds like mixed faces with high water pressure could require ground improvements for stable TBM advance or safe cutter head intervention (CHI). In this study, pre-grouting works for CHI in Daegok-Sosa railway project are presented in terms of the grouting zone design, the executions and the results, the lessons learned from the experience. It should be mentioned that the grouting from inside TBM was carried out several times and turned out to be inefficient in the project. Therefore, grouting experiences from the surface are highlighted in this study. Jet grouting was implemented on CHI points on land, while permeation grouting off shore in the Han River, which mostly allow to access the cutter head of TBM in free air with stable faces. The results of CHI works have been analyzed and the lesson learned are suggested.

• (The)Study of the Eastern Classic
• /
• no.69
• /
• pp.401-418
• /
• 2017

This study aims to consider the effects that the type of Chinese characters of "Kangxizidian(康熙字典)" manufactured under order of Emperor Kangxi(康熙) had on the type of Chinese characters on Korea from the latter part of Joseon(朝鮮) Dynasty to the present time, and to look for the meanings it has in the studies on history of Chinese characters science and character type science in Korea. "Kangxizidian" was introduced to Joseon on the 5th year of King Yeongjo(英祖)' reign(1729), the type of Chinese characters of had great influence on that of Chinese characters in Korea at that time. This can be seen from the fact that the types of Chinese characters written in "Hongmoojeongwoon(洪武正韻)", "Yeboowoonlaek(禮部韻略)", "Saengsaengjabo(生生字譜)", "Kyujangjeonwoon(奎章全韻)", "Jeonwoonokpien(全韻玉篇)", etc. which were published after King Yeongjo mostly included the character types of "Kangxizidian". Also, as seen from the fact that Ministry of Education specified that the character types of "Kangxizidian" shall be based for the standard of writing for 'basic Chinese characters for Chinese writing education' which were revised and proposed in 2000, the influence are said to be great until now. However, the concrete consideration of the effects that "Kangxizidian" has had on the type of Chinese characters in Korea and studies on its significance has been partially made, and it can be said that the studies thereof has not been made in earnest. This study was intended to make concrete studies on the effects of "Kangxizidian" on the types of Chinese characters in Korea and the insignificance, supplementing materials not dealt with in existing studies. The subjects of study by period which were dealt with in this study are as follows. In this paper, we reinforce data not covered in previous studies. And studies of "Kangxizidian" and the relationship between the type of Chinese characters in Korea characters and the influences of the past. Lastly, I showed the significance of the shape of the "Kangxizidian" to the modern Korean character shape of Korea.

• Journal of Digital Convergence
• /
• v.20 no.2
• /
• pp.163-174
• /
• 2022

Despite the great interest in the metaverse from academia and industry, research so far has been focused on a specific area, and the background of the study is in the recognition that research is necessary from the perspective of the entire metaverse ecosystem. The purpose of this study was to derive the metaverse research framework and each component to study from the perspective of the metaverse ecosystem, and to study the development stage of the metaverse ecosystem. From an academic point of view, the ecosystem components were derived through the Metaverse IDC-Platform, a framework for applying Michael Porter's diamond model to the metaverse. From a practical point of view, the four components of the metaverse ecosystem interact with each other in terms of metaverse application and development. As the basis of this study, it can be used strategically because it is possible to identify areas for reinforcement in academia and industry and provide basic data for insight by closely examining the strengths and weaknesses of each component. The contribution of research is that it has created a foundation for research that has been limited to specific areas from an ecosystem perspective, unlike before.