• Proceedings of the KSR Conference
• /
• 2003.10b
• /
• pp.297-304
• /
• 2003

As the high speed rail to be opened at 2004, the. railroad will dominate over the transportation market in the Seoul-Busan corridor compared to road transport. But, it is obvious that the LOS(level of service) of railroad at 2004 will be worse in the areas that are not served KTX. For the speed-up of conventional line, it is a worldwide trend that tilting trains are served on the conventional railway line. That is the reason serving tilting trains is very efficient to use existing facilities and improve cruise time when capacity is available. In this paper, we suggest 10 routes are replaced with present operating trains(saemaeul, mugunghwa) by the tilting train.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.942-947
• /
• 2004

After a lot of hard effort during last 50 years, we have been finally beared fruit of a high speed vehicle. But, A large percentage of the existing railways are actually being lasted it's last popularity because of the backward speed. The object of this research isn't supposed to make an effort for developing vehicle's speed with lower budget, but to evaluate it's efficiency. The time has come for upgrading train's lower speed with at the minimum of rail's changing. To solve this problem, we are describing that is how to control a transition curve of the railway.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.652-656
• /
• 2004

Crashworthy design of trains is now indispensable procedure in modern railway vehicle design for ensuring the safety of Passengers and crew. It is now widely recognized that a more strategic approach is needed in order to absorb higher level energy in a controlled manner and minimize passenger injuries effectively. The first design step in this strategic approach is the design of the front end structure(so called HE extremities) to absorb a large part of total impact energy and then the structure of passengers non-accommodation zones(so called LE extremities) is designed to absorb the rest of impact energy. In this paper, the passengers entrance door area is selected as the LE(low energy) extremities and the design of the LEE was carried out. The main part of LEE design procedures is the design of energy absorbing tubes. For this purpose, the several tube candidates are introduced and compared to each others with numerical crash simulation.

• Proceedings of the KSR Conference
• /
• 2002.05a
• /
• pp.317-329
• /
• 2002

This report was studied about system design of tilting car for speed up for conventional railroad of KNR. The maximum operating speed of Kyun-Pu line was recorded a 140km/h by saemaul train at 1985 and the average speed its is 107km/h now. The chungang line, janghang line and honam line of KNR had rebuilt to the electrified line for operation of tilting train. This report was described about the operation status of advanced countries, the operation situation of trains of KNR, system design for operation and speed up by EMU tilting train on the conventional railroad in the future.

• Proceedings of the KSR Conference
• /
• 2002.05a
• /
• pp.351-358
• /
• 2002

Tilting system allow the train to pass curve at higher speed without affecting passenger comfort. As the tilting trains offer the optimum means of providing faster and more comportable rail service with minimum of environmental disturbance and capital investment, more than 14 countries have now adopted or are about to adopt tilting train technology. The Korean National Railroad is also planing to apply faster tilting train to the areas where the High speed rail service are not provided. This paper shows the concept design of Bogie and Tilting system for 180 km/h Express tilting train for Korean conventional line, which was done as a part of the KNR's R&D project.

• Journal of the Korean Society for Railway
• /
• v.8 no.6 s.31
• /
• pp.550-558
• /
• 2005

The track performance evaluation in curves of conventional line subjected to loading condition caused by tilting trains was carried out. And the correlations between train speed and track alignment was reviewed. The parameters of track alignment were determined by field investigation of all curves in conventional line. It was founded that the pressure of the rail did exceed the allowable stress when the tilting train speed was over 96km/hr in radius of 300m. As the radius of curvature is smaller, applied force on the track becomes larger in the curved track without regard to laying of the continuos welded rail. On the while, the change of applied force on the track corresponding to the change of the cant is not so large.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.120-125
• /
• 2003

Since May 2003, On-line test to validate the interface between electrified conventional track, rolling stock, power supply and signalling system. Main test items are the suitability of the system such as vibration of the rolling stock, noise, current collection, track and signal system. In this article, part of the vibration and noise related test results are introduced such as the vibration of the carbody and bogie, running stability, jerk, interior noise of the passenger car and driver's cabin.

• Journal of the Korean Society for Railway
• /
• v.7 no.4
• /
• pp.360-366
• /
• 2004

The purpose of this paper is to present the alignment layout and the way of modifying transition curve for better operation of tilting trains. It is based on data from field investigation of all curves in conventional line. In general, all curves have transition parts in the beginning and end of the main curve in order to improve the passenger's comfort. The speed-up of conventional line may need an extention of transition curves. This paper checked out whether the transition curve should be modified or not and how to lengthen it. Then the maximum train speeds in curve prior to and after the modification of transition curve were evaluated.

• Journal of the Korean Society for Railway
• /
• v.7 no.4
• /
• pp.367-373
• /
• 2004

The investigation of running stability of the train for curved track is necessary in view of preventing the train from derailment caused by unbalanced forces transferred from the wheel and guaranteeing moderate level of running safety in curve sections. This paper carried out an analysis of running stability of tilting trains in conventional line which the test operation of tilting trains under development are scheduled. For this purpose, the wheel load and lateral pressure to the rail are evaluated. The criteria for the calculated wheel load and derailment coefficient are compared to the design criteria for running stability. It is founded that the running stability of tilting trains for curved track is guaranteed to have sufficient safety and the train speed in curve is governed by the geometric layout of track rather than the criteria for running stability.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.6
• /
• pp.95-104
• /
• 2003

The electric traction systems are quite differ from general power systems which is single-phase and heavy load. Therefore, there are inevitably power quality problems such as steady state or transient voltage drop, voltage imbalance and harmonic distortion. Among these problems, since steady-state volatge drop is the one of most important factor in electric power quality, many researches about on the compensation of volatge drop by using SVC(Static Var Compensator) and/or STACOM(Static Compensator) have been studied and proposed Also, it is expected that transient voltage drop(voltage sag) could affect the control and safety of high speed traction load. In this paper, voltage sag compensation of AT(Auto Transformer) feeding system are studied The detailed transient models of utility source, scott transformer, AT, and traction load are estabilished. The application of DVR(Dynamic Voltage Restorer) in electric traction system is proposed to compensate the voltage sag of traction network which is occured by the fault of utility source. It can be shown that application of the DVR in electric traction system is very useful to compensate the volatge sag from the result of related simulation works.