• Polymer(Korea)
• /
• v.31 no.2
• /
• pp.141-147
• /
• 2007

Dental properties of polymer composite loaded with hybrid filler of barium silicate (BaSi) and hydroxyapatite, which is a principal component of human bone material, were investigated. A visible light system was utilized to activate the acrylic resin matrix of the composite. Based on the experimental results, it was found that mechanical strength of the composite was consistently increased with an increase of BaSi content in the hybrid filler. And those value rose above the dental specification enough to apply for dental materials. However, abrasion resistance was slightly decreased with increasing BaSi content in the filler. Depth of cure value was 6 to 9 mm applicable for dental restoration irrelevant to hybrid filler composition. On the other hand, there was no strict trend between filler composition and polymerization shrinkage as well as degree of conversion.

• Korean Journal of Medicinal Crop Science
• /
• v.14 no.1
• /
• pp.19-22
• /
• 2006

Planting of peony, a perennial herb is usually planted in fall but the planting time can be postponed to next spring for other benefit such as land use, labour diversification and etc. This study was carried out to know the effect of planting time in spring on growth and yield of peony. Sprouting date in first year growth was earlier as planting time was later. Planting on March 10 showed best both top part and root growth and planting after that time resulted in worse growth. In planting on April 10, missing plant rate was 24% and accordingly root yield decreased to 43% comparing with that of March 10. Planting on March 10 resulted in thick and large number of root and so yield per l0a was 635 kg, the highest value among the other planting time in spring. The paeoniflorin content was not different significantly by planting time. These results suggested that March 10 was most appropriate for planting time in spring.

• Journal of Sericultural and Entomological Science
• /
• v.1
• /
• pp.15-21
• /
• 1960

4231년 농림부산림국에서 송충구제책으로 경기도 임업시험장에서 인공배양한 No.7호균외 수종을 사용할 계획인바 비에 대한 임업시험장 시험보고에 의하면 핵균은 송충에 대하여 맹독성이지마는 잠아에 대하여서는 기독성이 경미하다는 보고 이였으므로 양잠가에 대한 의문을 풀기 위하여 송충 및 잠아에 대한 전염성의 강약을 비교 시험하여 그 독성정도를 구명코저 함. 1. 경기도 임업시험장 연구보고 제1호에 기재된 No.7 호균의 시험성적과 본시험성적과를 대조하면 그 이병률은 일정한 경향을 표시치 않으며 다소 상치된 결과이었다. 즉 별표에 의하면 송충은 72~100% 잠아에 있어서는 4289년도에 0~2% 4290년도이 0~20%였으나 본시험결과 (표 1,2,3)는 송충은 표준구에 6.6% 처리구에 13.3~20%이고 잠아는 5~50%의 이병률이였다. 따라서 송충에는 그 감염도가 높으며 잠아는 그 감염도자 낮다고하는 근거를 인정키 난하다. 2. 본시험에 공시된 접종균 No.7호균은 경기도 임업시험장에서 호칭하는 황황강균(Insarica farinosa)이 었으나 핵균 배양시에 이균이 침입된 관계인지는 모르나 본시험에서 폐사를 검정한 결과 백강균(Botrytis Bassiana)이였다. 따라서 No.7호균에 대한 순도가 의심되며 시험결과의 정확을 기할수가없었다. 3. 경기도 임업시험장연구보고 제1호에 접수된 양년간시검성적에 의하면 경화병균 28종중 가장 이병률이 낮다고하는 No.7호균이 본시험결과에서 잠아에 5~50%의 이병률을 나타내는것으로 보아 소위 경기도 임업시험장에서 순수분리한 균은 어느것이라도 송충에 접종하여 산지에 산포하면 그 균이 중간기생 (인교목, 직교목)을 통하여 야생화되어서 더욱 잠아에 대한 전염력을 강렬하게됨으로 양잠상 위험할것이다. 일본의 소산씨 문헌(경기도 임업시험장도서관)에 의하면 야생혼충에서 전염되는 경화병균의 독성은 잠아에 대하여 강력하다는 점과 $\ulcorner$잠업지조선$\lrcorner$제11호에 전라남도 원잠종제조소 강본태대랑씨의 시험성적(참고문헌)이 이를 여실히 입증하는 바이다. (중략)

• The Korean Journal of Mycology
• /
• v.26 no.3 s.86
• /
• pp.407-410
• /
• 1998

The aphid-attacking fungus Pandora neoaphidis was collected during May and June, 1998 at various localities: two localities at Kyunggi, three at Kangwon, one at Kyungbuk and one at Chungnam Provinces. Occurrence of this fungus has never been recorded in Korea. The potential host aphids are Acyrthosiphon kondoi, Myzus persicae, Lipaphis erysimi, Sitobion avenae, Aphis rumicis, Dactynotus species and unknown species. Microscopic characters of the fungus are described and illustrated. Pandora neoaphidis studied in this study has an extremely broad range in conidial size and shape even within a single specimen. Such variable size and shape are typical characters of the fungus. During microscopic examination of specimens, the resting-spore phase was not observed.

• Korean Journal of Plant Tissue Culture
• /
• v.25 no.2
• /
• pp.115-118
• /
• 1998

This experiments were carried out to determine the optimum concentrations of plant growth regulators for the direct embryogenesis from the cotyledon culture of Paeonia lactiflora Pall. Zygotic embryos rescued from true seeds were developed abnormally in the medium containing ABA. But somatic embryogenesis from cotyledons of abnormal seedlings was induced more effectively. Also the somatic embryogenesis from cotyledons was promoted in the medium containing ABA. The frequency of embryogenesis was maximum(59.9%) from the cotyledons cultured on MS medium containing 0.5 mg/L ABA on which the frequency of somatic embryos with two cotyledons was 22.6%.

• Korean Journal of Head & Neck Oncology
• /
• v.32 no.2
• /
• pp.91-94
• /
• 2016

A 37 year-old male presented with sudden right proptosis and bilateral nasal obstruction. A huge tumor was noted in bilateral nasal cavities, ethmoid sinuses and central frontal sinus on magnetic resonance imaging. Right posterior frontal sinus wall and bilateral medial orbital wall was destructed by the tumor. Complete resection of the tumor was performed via minimal invasive craniofacial resection. Histopaghologic examination revealed sinonasal undifferentiated carcinoma (SNUC). Cerebrospinal fluid leakage was developed after 2 days of the surgery. On the 5th day, anterior skull base was reconstructed with forearm free flap (FFF). The patient got 6000cGy of radiotherapy and survived in 27 months of follow up.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.620-626
• /
• 2017

This study conducted chemical and physical hazard analysis on the acidity, peroxide value, color removal, and limit criteria of metal detector of roasted laver. The Hunter color L- and a-value of roasted laver was higher than the control, and the b-value was higher at $400^{\circ}C$. The limit criteria establish by metal detector was determined to a sensitivity of 60 because it detected 100% in a sensitivity of 60 to Fe and Sus. The acidity and peroxide values increased with increasing temperature. These results confirmed that roasted laver is safe when roasted to $300^{\circ}C$ for 5 seconds.

• Journal of Korean Medical classics
• /
• v.21 no.1
• /
• pp.79-92
• /
• 2008

Objective The analysis method based on the herbal formula's effects is a general tool, in traditional medicine. In effective applications of herbal formula, Korean herbal medicines traditionally used the classification methods based on the curative effects through the various compositions of herbal formulas. However' the effects of herbal formulas were not filed systemically in ancient literatures, and the standards to confirm their effects are not clear. Thus, it is not easy to classify herbal formulas according to the curative effects. Furthermore, there are no standards to estimate the effects of prescriptions frequently directed in clinic. In this study, we aimed to provide the methodology of classifying the curative effects of herbal formulas by calculating the combination of the effect of each compositional herb through the DB systems. Results : By comparing effects of herbal formula with those of compositional herbs, we found that about 25-50% of the herbal effects were included in herbal formula's effects. These results showed that the prospective estimation of herbal formula's effects may be possible through the DB systems filing herbal effects. To enhance the accuracy in explaining the herbal formula's effect, more studies are needed by giving prominence to major effects and by subtracting minor effects.

• Polymer(Korea)
• /
• v.36 no.1
• /
• pp.65-70
• /
• 2012

Glycidyl methacrylate (GMA) was used to introduce epoxy groups on the surface of polypropylene (PP) plate, used as a substrate, through plasma-induced graft copolymerization. Emulsion polymerization was applied for graft copolymerization of GMA and was compared with conventional solution polymerization to confirm its effect. Plasma treatment conditions under one atmospheric pressure were fixed as follows; the RF power of 200 W, the treatment time of 30 sec, the Ar gas flow rate of 6 LPM, and the exposure time of treated PP samples in air of 5 min. For graft-copolymerization, GMA concentration, reaction temperature, and reaction time was optimized to maximize the grafting degree of GMA. The maximum grafting degree of GMA was obtained at the condition of 12%-GMA concentration, $90^{\circ}C$ reaction temperature, and 5 hr-reaction time. Analysis results supported that the emulsion polymerization was more effective than the solution polymerization for grafting more GMAs on the surface of PP plate under the same reaction conditions.

• Journal of Biomedical Engineering Research
• /
• v.40 no.5
• /
• pp.165-170
• /
• 2019

Cancer cells are different from normal cells in terms of life cycle, behavior, and growth patterns. Cancer cells can migrate freely in the body through blood vessels and lymph nodes. The cancer cells easily interact with various substrates including extracellular matrix and vessels and they can differentiate in the new environment. However, it is not well known about the adhesion preference of cancer cells on the substrate and the mechanism of their interaction. In this study, we prepared the nano-, micro-patterned substrates using E-beam lithography techniques. MCF-7 cells were tested on the substrates to find out their adhesion preference. The substrates were made by polydimethylsiloxane (PDMS) with specific patterns including pillars with a diameter of 500 nm, 700 nm, $3{\mu}m$ and $5{\mu}m$. MCF-7 cells were seeded on the substrates and incubated for 24 hours. As a result, this study clearly demonstrated that the MCF-7 cells preferred 700 nm patterning.