• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.5
• /
• pp.1897-1905
• /
• 2013

Rheological properties such as yield stress and viscosity is the main parameters to determine the fluidity of the debris flow. In this study, several series of rheometer tests were performed to investigate rheological properties of fine-grained soil samples with various sand contents and various liquidity indices. Test results indicated that the general shape of the flow curves for fine-grained soils had characteristics of a shear thinning fluid, with a decrease in viscosity as shear rate increases. The yield stress and viscosity of fine-grained soil samples with same sand content gradually decreased as the liquidity index increased. At the same liquidity index, yield stress and viscosity of fine-grained soil increased with an increase in sand content. The yield stress and viscosity of fine-grained soil greatly decreased with a slight increase in water content. Also, the yield stress and viscosity tend to increase with increasing concentration by volume($C_v$) of the fluid matrix. The values of the four coefficients ${\alpha}_1$, ${\alpha}_2$, ${\beta}_1$, and ${\beta}_2$ were obtained by regression analysis for each fine-grained soil.

• Korean Journal of Food Science and Technology
• /
• v.50 no.4
• /
• pp.377-382
• /
• 2018

An HPLC method was developed to quantitate a marker, oxyresveratrol (ORT), for the standardization of mulberry branch extracts (MBE) as a functional ingredient. HPLC was performed on a $C_{18}$ column with a gradient elution using 0.05% $H_3PO_4$ and acetonitrile at a flow rate of 0.8 mL/min, and detected at 320 nm. The HPLC method was validated according to Korea Food and Drug Administration (KFDA) guideline of analytical procedures with respect to specificity, linearity, accuracy and precision. Calibration curve of ORT showed high linearity ($R^2=1$), and limits of detection and quantification were 0.3 and $1.0{\mu}g/mL$, respectively. Relative standard deviation values from intra-and inter-day precision were less than 3.52 and 4.70%, respectively. Recovery rate ranged from 97.64% to 103.69%, and ORT content in MBE was approximately 3.78%. These results suggest that the HPLC method developed for the analysis of ORT in MBE is simple, efficient, and could contribute to the quality control of MBE.

• Analytical Science and Technology
• /
• v.9 no.1
• /
• pp.78-83
• /
• 1996

Hydrogen ion-selective membrane electrodes based on tribenzylamine(TBA), tetrabenzylethylenediamine(TBEDA), pentabenzyldiethylenetriamine(PBDETA) as neutral carriers were shown good selectivity and linearity in the range of pH 1~pH 9, pH 2~pH 12, pH 4~pH 12. The pH selectivity of this membrane electrodes have nothing relation with the numbers of unshared electron pair in TBA, TBEDA, PBDETA and were shown a slope of 43.8mV/pH, 46.9mV/pH, 43.6mV/pH respectively. The selectivity coefficients were determined by the separate solution method for alkali($Li^+$, $Na^+$, $K^+$), alkaline earth metal($Ba^{2+}$, $Ca^{2+}$, $Mg^{2+}$) and transition metal ions($Mn^{2+}$, $Co^{2+}$, $Ni^{2+}$, $Cu^{2+}$, $Zn^{2+}$). The membrane electrode based on TBEDA appeared the best results as hydrogen ion electrode.

• Journal of Korean Society of Steel Construction
• /
• v.29 no.3
• /
• pp.229-236
• /
• 2017

The purpose of this study is to investigate the behavior and characteristics of rubber springs and calculate the compressive stiffness by performing dynamic compression tests of rubber springs. In order to carry out the dynamic compression test of rubber spring, total 9 rubber springs were tailored by calculating the shape factor of L80-D55, L90-D58, and L100-D60, and used for the experiments. Experiments were performed by controlling the compression according to the length of the rubber spring, and the compression was increased in the order of 5%, 10%, 15%, 20% and 25% of the strain. From the experimental results, the force-strain curves were obtained and it was confirmed that strength decrease and strength increase phenomenon occurred as the strain increased. In addition, it was confirmed that the decrease of stiffness and the increase of stiffness were clearly observed according to the size and diameter of the rubber spring, and the effective compression stiffness was estimated using the slope of the force-strain curve. By using the effective compressive stiffness, design values that can be used in actual design were presented.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.8
• /
• pp.572-577
• /
• 2011

The unit load has simply been used to estimate total pollutant loading from non-point sources, however, it does not count on the variable pollutant loading according to land use characteristics and rainfall intensity. Since pollutant emission from the watershed is strongly dependent on the rainfall intensity, it is necessary to find out the relationship between pollutant loading and rainfall intensity. The objective of this study is to develop simple and easy method to compute non-point source pollution loads with consideration of rainfall intensity. Two non-point source removal facility at Gyeongan-dong (Gwangju-si) and Mohyeon-myeon (Yongin-si), Gyeonggi-do was selected to monitor total rainfall, rainfall intensity, runoff characteristics and water quality from June to November, 2010. Most of Event Mean Concentrations (EMC) of measured water quality data were higher in Gyeongan which has urban land use than in Mohyeon which has rural land use. For the case of TP (Total Phosphorus), Mohyeon has higher values by the influence of larger chemical uses such as fertilizer. The relationship between non-point source pollution load and rainfall intensity is perfectly well explained by cubic regression with 0.33~0.81 coefficients of determination($R^2$). It is expected that the pollution loading function based on the long-term monitoring would be very useful with good accuracy in computing non-point source pollution load, where a rainfall intensity is highly variable.

• Korean Journal of Environmental Agriculture
• /
• v.25 no.1
• /
• pp.58-63
• /
• 2006

In order to elucidate the adsorption and leaching characteristics of the insecticide imidacloprid in two types of paddy soils near Suwon, this experiment was carried out with $[^{14}C]$imidacloprid as a radiotracer. In an adsorption study conducted using $[^{14}C]$imidacloprid in 2 test soils, the adsorption coefficient was higher in soil A $(K_f\;2.6)$ than that in soil B $(K_f\;1.7)$. As calculated from Freundlich constant, distribution coefficients and half lives in soils, GUS indices showed low leachabilities of imidacloprid treated on the paddy soils into the groundwater. The amount of imidacloprid leached from the soil columns during the 4 weeks of leaching was less than 2% of the originally treated $^{14}C$. In the leaching test the amounts of $^{14}C$ activities distributed in the soil layer of 0-10 cm were more than 80% of the originally tented $^{14}C$ and those in rice plants were less than 3% of the originally treated $^{14}C$, suggesting that imidacloprid has very low teachability and bioavailability.

• Journal of Food Hygiene and Safety
• /
• v.22 no.4
• /
• pp.370-374
• /
• 2007

An analytical method for the simultaneous determination of four tetracycline (oxytetracycline, tetracycline, chlortetracycline, doxycycline) in egg samples was developed and validated using liquid chromatography with ultraviolet detection. Egg samples were extracted by the liquid-liquid extraction based on acetonitrile. The chromatographic separation was achieved on a reverse phase C8 column with gradient elution using a mobile phase of 20 mM oxalic acid (pH 1.5)/acetonitrile. The procedure was validated according to the Food Drugs Administration guideline determining accuracy, precision, and limit of detection. Mean recovery of tetracyclines from spiked egg samples (50, 100, 200, 400, and $800{\mu}g/kg$) were 78.8-109.3%. Linearity in concentration range of $50-800{\mu}g/kg$ was obtained with the correlation coefficient $(r^2)$ of 0.994-0.999. The intra- and inter-day precision (relative standard deviation; RSD) was between 0.3-12.8 and 0.2-11.7%, respectively. Limit of detection (LOD) and limit of quantification (LOQ) for the investigated tetracyclines were 30 and $50{\mu}g/kg$ depending on egg samples, respectively. This method was reliable, sensitive, economical and suitable for routine monitoring of tetracycline residues in dairy egg.

• Analytical Science and Technology
• /
• v.23 no.1
• /
• pp.68-73
• /
• 2010

In order to develop the square wave voltammetric method determining cimetidine in an ampoule for injection, $5.00{\times}10^{-4}\;M$ cimetidine HCl solutions prepared with phosphate buffers of various pH values (3.01~8.97) were investigated by SWV. The well defined single peak due to the electrochemical reduction of -C=N-C$\equiv$N- in the structure of cimetidine moved towards the cathodic direction by -0.051V/pH as the pH values were increased indicating the involvement of hydrogen in its reduction. The calibration curves of cimetidine HCl in the concentration range between $1.00{\times}10^{-5}\;M$ and $5.00{\times}10^{-3}\;M$ prepared using three phosphate buffers yielded the slopes of 127,407nA/M (pH 3.01), 115,125nA/M (pH 5.00) and 111,287nA/M(pH 7.00) with excellent linearities of $R^2{\geqq}0.9997$. When one ampoule of Tagma Inj.$^{(R)}$ was analyzed by standard addition method by SWV, the within-day precision study (n=4) on the day of sample preparation resulted in the contents of cimetidine as $203{\pm}3.8\;mg$ (102% of the specified contents, RSD of 1.9%) and the inter-day precision (n=4) through 5 days was reasonable as 1.3% of RSD.

• Journal of Ginseng Research
• /
• v.33 no.1
• /
• pp.8-12
• /
• 2009

A simple gradient HPLC method for rapid determination of major ginsenosides ($Rg_1$ and $Rb_1$) and unique ginsenoside (Rf) of Korean ginseng (Panax ginseng C.A. Meyer) was developed. Within 50min, three ginsenosides have been separated and identified on $\mu$-Bondapak $C_{18}$ column ($3.9{\times}300\;mm$, $10{\mu}m$) with gradient elution using water and acetonitrile as a mobile phase. The method was validated in terms of linearity, accuracy, and precision. The correlation coefficients ($r^2$) for calibration curves of ginsenosides were over 0.9997. The developed HPLC method was successfully applied to the analysis of ginseng samples and the recoveries of ginsenosides were in the range of $101.1{\sim}115%$ with RSD<3.2%. The developed method could be used for rapid evaluation of the ginsenosides $Rg_1$, $Rb_1$, and Rf.

• Journal of the Korea Concrete Institute
• /
• v.19 no.2
• /
• pp.199-207
• /
• 2007

Strut-and-tie models for noncontact lap splices are presented and parameters affecting the effective lap length $(l_p)$ and the splice strength are discussed in this paper. The effective lap length along which bond stress is developed is shorter than the whole lap length. The effective lap length depends on the transverse reinforcement ratio $({\Phi})$ and the ratio of spacing to lap length $({\alpha})$. As the splice-bar spacing becomes wider, the effective lap length decreases and, therefore, the splice strength decreases. The influence of the ratio ${\alpha}$ on the effective lap length becomes more effective when the transverse reinforcement ratio is low. Because the slope of the strut developed between splice-bars becomes steeper as the ratio ${\Phi}$ becomes lower, the splice-bar spacing significantly affects the effective lap length. The proposed strut-and-tie models for noncontact lap splices are capable of considering material and geometric properties and, hence, providing the optimal design for detailing of reinforcements. The proposed strut-and-tie model can explain the experimental results including cracking patterns and the influence of transverse reinforcements on the splice strength reported in the literature. From the comparison with the test results of 25 specimens, the model can predict the splice strengths with 11.1% of coefficient of variation.