• Electronics and Telecommunications Trends
• /
• v.24 no.3
• /
• pp.78-90
• /
• 2009

이더넷(Ethernet)은 본래 캠퍼스, 기업이나 가정 등 근거리의 LAN 영역에 주로 사용되는 기술이었으나 플러그 앤 플레이(plug and play)와 같은 단순함(simplicity), 적은 설치 비용 및 쉬운 운용 등을 장점으로, 통신 사업자 및 운용자(carrier)의 고유영역인 MAN/WAN에서도 사용 가능한 메트로 이더넷 및 캐리어 이더넷(Metro/Carrier Ethernet)으로 빠른 속도로 진화 발전하고 있는 상황이다. 캐리어 이더넷은 탄력성(resiliency), 신뢰성(reliability), 확장성(scalability), 관리성(manageability) 등과 같은 특징을 중요시하는 통신 사업자 환경에서 이더넷 기반 서비스를 제공할 수 있는 확장된 이더넷 기술을 의미한다. 본 고에서는 캐리어 이더넷 기술에 대한 정의와 관련 서비스를 소개하고, MEF, IEEE 802, ITU-T, IETF 등 국제 기구 및 연관 포럼에서 진행중인 캐리어 이더넷 기술의 표준화 동향을 살펴보고자 한다.

• Journal of Convergence for Information Technology
• /
• v.9 no.8
• /
• pp.45-52
• /
• 2019

This paper proposes the design of a closed-loop stepping motor drive for real-time Ethernet (RTE), which can be easily applied to a variety of RTE protocols. The proposed design is divided into a closed-loop step motor drive which can be reused for various types of RTE protocol and RTE module developed for each specific RTE protocol. It is based on a layered architecture so that the motion control algorithm can be easily reused independently of the RTE protocol and motion profile. To verify the proposed design, closed-loop motor drives based on EtherCAT and Mechatrolink III were developed and their performances were evaluated. Cycle time was measured to verify the real-time communication performance of the developed EtherCAT and Mechatrolink III based motor drive. As a result, the EtherCAT was 7.5 times faster than the Mechatrolink III when 32 motor drives were connected.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.12
• /
• pp.2663-2669
• /
• 2010

During the past 5 years, domestic VoIP service has grown rapidly absorbing more than 8 million subscribers. More recently, the increase of enterprise or institutional subscribers become more dominant than individual subscribers. Supporting emergency services such as 119 in these scaled up VoIP services is very essential. In current domestic VoIP networks, the VoIP terminal's location information which are provided to the PSAP with the arriving emergency call depends on the information which are entered at the subscription time or updated by the subscribers when the terminal is moved to other place. This manual provision of location information which requires the user's intervention can result in serious failure in saving people in emergency situations, in case that users are negligent in entering the information or users enter the wrong information. In this paper, we propose an enhanced mechanism in which the terminal's location information is automatically offered by the network for emergency services in ethernet-based enterprise VoIP networks.

• Journal of Korea Technology Innovation Society
• /
• v.20 no.2
• /
• pp.368-386
• /
• 2017

The purpose of this study is to present the technology value model based on profit approach and IITP practical guide for Ethernet network technology, which is the core technology of autonomous vehicles and connected cars in the hyper-connected industry. In-vehicle network, Ethernet technology, Ethernet port count, port pricing, and application data for technology assessment are sources of global market research organizations. The data on the company's COGS (Cost of Goods Sold), operating capital requirement, capital expenditure, and income statement data are used by the Bank of Korea's Business Analysis Report. According to the results of the study, the product market size was estimated to be US $470.3 billion and the technology market size was $52.1 billion over the seven years of economic life cycle of technology. The market value of the technology was estimated to be $260 million reflecting the possibility of entry into the market. In the case of the corporate management analysis report, the average value of the IITP and the top 25% were $0.7 million and $40.2 million, respectively. -27.8 million, and -73.6 million dollars respectively. This implies that government support for policy support is needed when conducting corporate R&D with high cost-to-sales ratio. The results of this study can be used as a reference for the evaluation of technology demand based ICT R&D technology in the industrial internet market in the fourth industrial revolution era.

• The Magazine of the IEIE
• /
• v.32 no.4 s.251
• /
• pp.47-61
• /
• 2005

현재의 인터넷은 가입자 액세스 망, 기업망, 메트로 망, 그리고 백본 망으로 이루어져 있다고 할 수 있다. 이러한 망 중에서 가입자 액세스 망과 기업 망, 그리고 백본 망은 현재의 폭발적으로 증가하고 있는 인터넷 트래픽을 효율적으로 수용할 수 있도록 고도화되어 있으나, 메트로 망은 기존의 회선 교환 방식의 SONET/SDH 기반 망을 이용함으로써 비효율적이고 또한 비싸다는 단점을 가지고 있다. 이러한 메트로 망에서 효율적으로 인터넷 트래픽을 전송할 수 있는 RPR(Resilient Packet Ring) 기술이 IEEE 802,17 위원회에서 표준화되었다. RPR에서는 메트로 망에서의 필수 요소인 망 보호 메커니즘이 정의되어 있으며, 토폴로지 발견 메커니즘을 제공함으로써 이더넷의 고유 성질인 plug-and-play를 유지할 수 있어서 새로운 노드의 추가가 용이하다는 장점을 가지고 있다. 또한 링 형태의 각 노드들 간에 공평하게 망을 이용할 수 있기 위한 알고리즘도 정의되어 있다 이 논문에서는 IEEE 802.17 위원회에서 정의된 RPR 기술 및 현재의 표준화 동향에 대해서 다루고자 한다.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2661-2664
• /
• 2003

인터넷의 편재성과 유용성 때문에 인터넷이 산업현 장에까지 확장 적용될 필요성이 증대되고 있다. 따라서 본 논문에서는 원격지나 또는 바로 산업 현장에 대한 예측가능 유지 보수가 수행될 수 있도록 하는 가상 디바이스 네트워크의 관리 시스템에 대한 개념을 제시하다. 디바이스 제어 네트워크로서 LonWorks 네트워크를 선택하고. 데이터 네트워크로는 이더넷을 선택하여 가상 디바이스 네트워크를 구성하였다. 가상 디바이스 네트워크를 구현하기 위해 LonTalk/IP 게이트웨이/웹 서버를 이용하였다. 가상 디바이스 네트워크의 운영 및 관리를 통한 응용 예로서 기업의 가상 머신/생산 시스템에 관한 예측 유지보수 예를 제시하였다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.9
• /
• pp.26-37
• /
• 2016

The core technologies of the current transport network are OAM and protection switching to meet the sub-50ms protection switching time via a path redundancy when a link or node failure occurs. The transport networks owned by public network operators, central/local governments, and major enterprises are individually configured and managed with service resiliency in each own protected sub-network. When such networks are cascaded, it is also important to provide a node resiliency between two protected sub-networks. However, the linear protection switching in packet transport networks, such as MPLS-TP and Carrier Ethernet, does not define a solution of dual node interconnection. Although Ethernet ring protection switching covers the dual node interconnection scheme, a large amount of duplicated data frames may be flooded when a failure occurs on an adjacent (sub) ring. In this paper, we suggest a dual node interconnection scheme with linear protection switching technology in multiple protected sub-networks. And we investigate how various protected sub-network combinations with a proposed linear or ring protection process impact the service resiliency of multiple protected sub-networks through extensive experiments on link and interconnected node failures.

• Journal of Digital Contents Society
• /
• v.19 no.4
• /
• pp.801-808
• /
• 2018

The performance test methodology for switch, router or integrated networks that make up the wired network is not clearly defined. Due to smart phones and multimedia traffic, the speed of the network is rapidly increasing to 100Gbps. However, there is no formalized test method, and performance test related parts are still being tested based on old data. Telecommunication companies and companies are testing their requirements in their own BMT, and government or public institutions are requesting performance tests from external organizations. As the demand for the performance test of next generation network equipments and the integrated network increases, analysis of the performance test method should be done as soon as possible. Therefore, in this paper, we analyze the performance test method performed by the institute and propose guidelines that can be applied to all wired network equipment.