• Journal of the Korean Society of Safety
• /
• v.7 no.2
• /
• pp.63-70
• /
• 1992

The aim of this research is to obtain a basic quantitative understanding of the effect of a noncondensable gas on the absorption of water vapor by a $H_2O$ / LiBr combination with n-octanol as the surfactant. Nonflowing aqueous solutions of LiBr (40,45,50 mass％) were exposed to saturated water vapor following the addition of an n-octanol sufactant (0.01 and 0.6 mass％). A small amount of a noncondensable gas (air) was allowed into the absorber (0.03 volume％) and its effect was analyzed by measuring the amount of water vapor absorbed. This study will aid to predict the performance of heat pump and safety operating condition when the noncondensable gas is not allowed in the absorber The results indicate that, in the presence of small amounts of a noncondensable gas, vapor absorption enhancement ratios are less than half o( those obtained under the same experimental conditions when a noncondensable gas is not present (1). The presence of a noncondensable gas causes the partial vapor pressure of air to increase at the vapor / liquid interface, which results in an instability of vapor absorption rate nd. hence, in an inhibition of interfacial disturbance.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06b
• /
• pp.219-222
• /
• 1996

수열법은 밀폐용기중에서 10$0^{\circ}C$이상의 가열, 가압된 수용액이 반응에 관여하는 것으로써, 수정, CaCO3, AlPO4, GaPO4 등과 같은 단결정의 육성 뿐만 아니라 균일분산계로부터 균일한 결정성의 미립자 합성에도 폭넓게 이용되고 있다. 세라믹분말의 합성에 있어서, 이 방법은 특히 형상, 입자크기의 제어가 용이할 뿐만 아니라 고상법, 졸-겔법, 공침법에서와 같은 열처리, 분쇄과정이 필요없기 때문에 고순도의 초미립자를 얻을 수 있는 장점이 있다. 근년 미국, 일본에서는 수열법을 이용한 유전, 압전체 등 세라믹분말의 일부가 공업적인 규모로 대량 생산되고 있다. 그러나 이에 대한 국내 기술은 아직 초기단계에 이르고 있는 실정이다. 따라서 본 연구실에서는 수열법에 의한 단결정 육성 (예; 자수정, CaCO3, AlPO4, GaPO4, KTP, Emerald 등), 박막제조 (예; GaP, PbTiO3, BaTiO3 등), 정제 (고령토, 장석, 도석 등), 원석처리 (진주, 인공 emerald, 비취 등) 그리고 각종 세라믹분말의 합성 등과 같은 다양한 기반기술의 축적과 동시에 공업화에 대응한 수열장치를 위하여 반응용기의 대형화, 엄밀한 밀폐방식, 실용적인 수열조건 등을 개발해 오고 있다. 본 발표에서는 현재까지의 연구개발 내용 중에서 결정성 미립자에 관련한 세라믹분말의 합성에 대한 일부의 결과들을 보고한다. 일반적으로 수열장치는 전기로, 반응용기, 온도 및 압력제어계 등을 기본으로 하고 있으며 시판용의 대부분이 교반기가 부착된 수직형 (vertical type)이다. 이와 같은 방식에 있어서는 엄밀한 밀폐가 곤란, 반응온도의 한계성 (25$0^{\circ}C$ 이하), 증진율의 한계성 (소량생산) 등과 같은 점이 있기 때문에 본 연구실에서는 개폐식 전기로내에 엄밀한 밀폐가 가능한 수평식(horizontal type)의 반응용기를 채택한 뒤 이를 회전 또는 시이소(seesaw)식으로 움직일 수 있도록 하여 연속공정화, 온도구배의 자율조절 그리고 보다 저온에서도 인위적인 이온의 확산을 효율적으로 유도할 수 있도록 하였다. 이와 같은 방식은 기존의 방식과 비교하여 반응용기 내에 응집현상과 미반응물이 존재하지 않으며 또한 단분산으로 결정성 미립자를 대량적으로 얻을 수 있는 장점이 있었다. 다음은 이상과 같이 본 연구실에서 자체 개발한 수열장치를 이용하여 PbTiO3, (Pb,La)TiO3Mn, BaTiO3, ZnSiO4:Mn, CaWO4 등과 같은 세라믹분말에 대한 합성 실험의 결과이다. 압전성, 초전성이 우수한 PbTiO3 및 (Pb,La)TiO3:Mn 분말의 수열합성은 PbO, TiO2, La2O3 등의 분말을 출발원료로 하여 합성도도 25$0^{\circ}C$부근의 알카리성 용액중에서 결정성 PbTiO3 및 (Pb,La)TiO3:Mn 미립자를 단상으로 얻었으며 입자의 형상 및 크기는 합성온도와 수열용매의 종류에 의존하였다. 유전체로서 폭넓게 응용되고 있는 BaTiO3 분말은 Ba(OH)2.8H2O, TiO2와 같은 최적의 출발원료를 선택함으로써 15$0^{\circ}C$ 부근의 저온영역에서도 용이하게 합성할 수 있었다. 특히 본 연구에서는 수용성인 Ba(OH)2.8H2O를 사용함으로써 host-guest적인 반응을 유도시키는데 있어 물의 가장 실용적이고 효과적인 수열용매임도 알았다. ZnSiO4:Mn, CaWO4, MgWO4와 같은 형광체 분말은 공업적으로 고상반응 또는 습식법에 의해 얻어지고 있으나 이들 방법에 있어서는 분쇄공정으로 인한 형광특성의 저하와 같은 문제점이 있다. 따라서 본 연구에서는 수열법을 이용하여 이들 화합물의 합성을 시도하였으며 그 결과 합성온도 30$0^{\circ}C$ 부근의 알칼리성 용액중에서 수열적으로 얻어짐을 알았다. 여기서의 합성분말을 이용하여 실제 조명램프로 제조한 결과 녹색, 청색 발광용 형광체로서 우수한 형광특성을 나타내었다. 천연에서 소량 산출되고 있는 고가의 (Li,Al)MnO2(OH)2:Co 분말은 도자기의 전사지용 청색안료로써 이용되고 있다. 본 연구실에서는 LiOH.H2O, Al(OH)3, MnO2 등의 분말을 출발원료로 하고 24$0^{\circ}C$ 온도 부근 그리고 물을 수열용매로 하여 천연산에 필적하는 (Li,Al)MnO2(OH)2:Co 분말을 인공적으로 합성하였다.

• The Korean Journal of Air & Space Law and Policy
• /
• v.24 no.1
• /
• pp.153-194
• /
• 2009

The resources of outer space are for the common exploitation of mankind, and it is a common responsibility of mankind to protect the outer space environment. With the rapid development of space science and technology, and especially with the busy space activities of some major space powers, environmental contamination or space debris is steadily increasing in quantity and has brought grave potential threats and actual damage to the outer space environment and human activities in space. Especially We must mitigate and seek out a solution to remove space debris which poses a threat directly to man's exploitation and use of outer space activities in the Low Earth Orbit (LEO) and in the Geostationary Orbit (GEO), through international cooperation and agreement in the fields of space science, economics, politics and law, in order to safeguard the life and property of mankind and protect the earth's environment. While the issue of space debris has been the subject of scientific study and discussion for some time now, it has yet to be fully addressed within the context of an international legal framework. During the earlier stages of the space age, which began in the late 1950s, the focus of international lawmakers and diplomats was the establishment of basic rules which sought to define the legal nature of outer space and set out the parameters for space activities and the nature and scope of activities carried out in outer space were quite limited. Consequently, environmental issues and the risks that might arise from the generation of space debris did not receive priority attention within the context of the development international space law. In recent years, however, the world has seen dramatic advances in technology and increases in the type and number of space-related activities which are being carried out. In addition, the number of actors in this field has exploded from two highly developed States to a vast array of different States, intergovernmental and nongovernmental organizations, including private industry. Therefore, the number of artificial objects in the near-Earth space is continually increasing. As has been previously mentioned, COPUOS was the entity that created the existing five treaties, and five sets of legal Principles, which form the core of space law, and COPUOS is clearly the most appropriate entity to oversee the creation of this regulatory body for the outer space environmental problem. This idea has been proposed by various States and also at the ILA Conference in Buenos Aires. The ILA Conference in Buenos Aires produced an extensive proposal for such a regulatory regime, dealing with space debris issues in legal terms This article seeks to discuss the status of international law as it relates to outer space environmental problem and space debris and indicate a course of action which might be taken by the international community to develop a legal framework which can adequately cope with the complexity of issues that have recently been recognized. In Section Ⅱ,Ⅲ and IV of this article discuss the current status of international space law, and the extent to which some of the issues raised by earth and space environment are accounted for within the existing United Nations multilateral treaties. Section V and VI discuss the scope and nature of space debris issues as they emerged from the recent multi-year study carried out by the ILA, Scientific and Technical Subcommittee, Legal Subcommittee of the United Nations Committee on the Peaceful Uses of Outer Space ("COPUOS") as a prelude to the matters that will require the attention of international lawmakers in the future. Finally, analyzes the difficulties inherent in the future regulation and control of space debris and the activities to protect the earth's environment. and indicates a possible course of action which could well provide, at the least, a partial solution to this complex challenge.

• Archives of design research
• /
• v.12 no.4
• /
• pp.33-44
• /
• 1999

Fashion is subjected to newness and change by itself. Fashion trend and tendency which could predict next season akeady indicated that digital and cybel11ation environment lliould be factors in fashion. Changes in future life styles and values caused by digital environment must be variables as fashion objects by themselves. Therefore digital environment of a fashion itself and that all encountered in fashion will not only be an existing situation but also an objective and a factor which must be pursued with fashionable sense in future fashion. Advanced technology and social change in relation to digital environment requires that educational method as well as its content will be changed on the scene of education for future. Thus we should seek an educational direction in fashion design for future society in which digital environment requires new paradigm. Subject to these backgrounds this study has an intension to study the change in fashion extensively influenced by expanded digital environment on a limited situational level of fashion design education and to suggest an educational direction for professional in future fashion design who will serve as a core of fashion area in the future. It is essential that education of professional in fashion for future should be achieved by digital-minded level that eagerly understands and accepts future society in which digital environment will be a main axis. It is necessary for this to make them expetience computers, digital media including CAD program. We have to note that education of digital media is more effective and applicable when accomplished in CAI level which can be related and expetienced with fashion education rather than mere functional training in media themselves. Intellectual creativity will be a vety source of producing values and national competence in 21st centtury. Education of design professional in fashion area must positively accept these environmental charactetistics in future society, as well as deeply reflect the education for the future.

• Journal of Korea Water Resources Association
• /
• v.53 no.8
• /
• pp.627-636
• /
• 2020

Debris flow disasters primarily occur in mountainous terrains far from cities. As such, they have been underestimated to cause relatively less damage compared with other natural disasters. However, owing to urbanization, several residential areas and major facilities have been built in mountainous regions, and the frequency of debris flow disasters is steadily increasing owing to the increase in rainfall with environmental and climate changes. Thus, the risk of debris flow is on the rise. However, only a few studies have explored the characteristics of flooding and reduction measures for debris flow in areas designated as steep slopes. In this regard, it is necessary to conduct research on securing independent disaster prevention technology, suitable for the environment in South Korea and reflective of the topographical characteristics thereof, and update and improve disaster prevention information. Accordingly, this study aimed to calculate the amount of debris flow, depending on disaster prevention performance targets for regions designated as steep slopes in South Korea, and develop an independent model to not only evaluate the impact of debris flow but also identify debris barriers that are optimal for mitigating damage. To validate the reliability of the two-dimensional debris flow model developed for the evaluation of debris barriers, the model's performance was compared with that of the hydraulic model. Furthermore, a 2-D debris model was constructed in consideration of the regional characteristics around the steep slopes to analyze the flow characteristics of the debris that directly reaches the damaged area. The flow characteristics of the debris delivered downstream were further analyzed, depending on the specifications (height) and installation locations of the debris barriers employed to reduce the damage. The experimental results showed that the reliability of the developed model is satisfactory; further, this study confirmed significant performance degradation of debris barriers in areas where the barriers were installed at a slope of 20° or more, which is the slope at which debris flows occur.

• Journal of Technology Innovation
• /
• v.28 no.4
• /
• pp.1-26
• /
• 2020

Due to the spread of Corona 19 around the world, Infectious Disease Medicine and New Medical Devices such as Diagnostic Agent are being rapidly developed and launched, and for the fast supply and demand of these, each country has eased import regulations or has implemented policies for fast approval(NIDS, 2020). On the other hand, New Developed Medical Devices that are not related to New Infectious Diseases, they are still entering the market through strict licensing and licensing regulations, such as delay and cancellation in the test inspection process, etc. Therefore, This Study specialized in the government-managed laws encountered when New Medical Devices enter the market, derive Factors influencing the Strength of Regulations, analyzes the Strength of Regulations, and proposes a Regulatory Response Framework. The Research Method was conducted by Literature Research, was applied by Failure Mode and Effects Analysis(FMEA) Method, Expert Interview(1st): Idea Collection, Expert Interview(2nd): Validation, and Priority through the Application Process of FMEA Method. A Method of Quantifying the Intensity of Regulation was proposed by multiplying the Impact of the Influencing Factors for each stage of regulation and the Burden Impact for each type of Regulatory Affairs to find the Importance of the Regulatory Factors and multiplying the Severity of the Regulatory Impact. The Implications are that major overseas countries and the Korean government are actively responding with Special Regulatory Policies and Mitigation Policies for fast licensing of New Developed Medical Devices in accordance with Corona 19. It is expected that the direction for improvement of regulations and measures to respond to regulations will be implemented so that a more proactive and preemptive response to the regulatory process of the licensing policy for New Devices can be achieved.

• Clean Technology
• /
• v.25 no.1
• /
• pp.46-55
• /
• 2019

CdS and CdZnS/ZnO materials were prepared using precipitation method and used as photocatalysts for the photocatalytic degradation of rhodamine B (RhB) under visible light irradiation. The prepared photocatalysts were also characterized by XRD and UV-vis DRS. The results indicated that the photocatalysts with intended crystalline structures were successfully obtained and both the CdS and CdZnS/ZnO can absorb visible light as well as UV. The photocatalytic activities were examined with the addition of scavenger for various active chemical species and the difference of reaction mechanisms over the catalysts were discussed. The $CH_3OH$, KI and p-benzoquinone were used as scavengers for ${\cdot}OH$ radical, photogenerated positive hole and ${\cdot}O_2{^-}$ radical, respectively. The CdS and CdZnS/ZnO showed different photocatalytic degradation mechanisms of RhB. It can be postulated that ${\cdot}O_2{^-}$ radical is the main active species for the reaction over CdS photocatalyst, while the photogenerated positive hole for CdZnS/ZnO photocatalyst. As a result, the predominant reaction pathways over CdS and CdZnS/ZnO photocatalysts were found to be the dealkylation of chromophore skeleton and the cleavage of the conjugated chromophore structure, respectively. The above results may be mainly ascribed to the difference of band edge potential of conduction and valence bands in CdS, CdZnS and ZnO semiconductors and the redox potentials for formation of active chemical species.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.23 no.1
• /
• pp.15-28
• /
• 2019

Purpose Nuclear medicine was initially introduced in Korea in 1969 and widely applied to treat hyperthyroidism with $^{131}I$. Also, gamma camera was adopted in 1969 in the first place and its application has been growing continually in many ways. We analyzed long-term trend in nuclear medicine examinations for the last 2 decades. The purpose of this paper is to make predictions and to set both plans and directions on the development of nuclear medicine. Materials and Methods We analyzed the performance of nuclear medicine examinations and therapies performed in Asan Medical Center from 1998 to 2017. Results Results from the last 20 years regarding Bone scan, Renal scan, MUGA scan and $^{18}F$-FPCIT, Bone Mineral Density were on a increase. And Myocardium perfusion SPECT, Thyroid scan, Lung scan were on a decrease while $^{18}F-FDG$ PET maintained on a steady course. Until 2010 there was a positive performance with the therapy but after the excessive medical care in thyroid examination performance is at status quo. Key events such as a medical strike(2000), Middle-East Respiratory Syndrome (2015) influenced the overall performance of the therapy. Conclusion In order to promote a long-term growth in nuclear medicine examination and therapy, it is inevitable to respond to the changes in current medical environment. Furthermore, it is strongly suggested to put efforts to maintain and develop new examinations and clinical indicators.

• Korean Journal of Heritage: History & Science
• /
• v.40
• /
• pp.73-104
• /
• 2007

Centering around ruins recognized of being relatively early stage related to flat tile and brick, excavated in Silla capital area, the study attempted elementary approach to seek the appearance time of every remain through comparing them from the excavated cases and production methods of Short beating, Medium beating plate, Long beating plate and Stamped-roof tile. Gyeongju began to use the short beating plate made of tile-less plates or tile plate and increased its quantity. That is deemed to be due to efficiency of beating plate making methods, and moreover to be limited only for use in the palace castle and offices. That is, making short beating plates is presumed to be made merely under some definite objectives. Medium beating plate has been spread to the whole country since Silla and Baekje united. Differently from Koguryo and Baekje, Silla had its unique Beating-plates making technology available for mass-production, which was spread to the whole country and resulted in disappearing of Koguryo and Baekje technology. Long beating plate was not nearly founded in Gyeongju area, but flat tile and common tile excavated in Sachunwang Temple site and Samrang Temple 3rd remains are known. In the outskirts of Gyeongju, long beating plate appeared between the latter half of 8C and the beginning of 9C. Until now, different views have raised to appearance of long beating plate of Unified Silla, which is expected to be clarified under the situation excavated by position relations. Stamped-roof title in Gyeongju is estimated as used after the datum point year 679. While in Baekje area, five stems and branches were involved, in Silla area, code or sign was shown much. The difference between two areas would be due to each other factory, and especially the marked contents werenot letters, which means it had been changed from Baekje s existing-methods. That is, it says the production environment changed owing to Silla's merging. And stamped-roof tile was temporarily used in Gyeongju but soon disappeared, which was because Silla beating plates made under cylinder-shaped tile barrel(圓筒瓦桶) and hitting-pressing of Medium beating plate had beenspread to the whole country, so the production technology of Koguryo and Baekje was naturally dismissed. In consequence, the mergence by Silla brought about unification of each nation's special technology.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.428-434
• /
• 2019

Many countries have interested animal welfare. Similarly, domestic people have concern for the welfare from companion animals to livestock. Environmental enrichments (EE) are tool to enforce the welfare, however, research with sows is limited. Therefore, this study was investigate to effects of environmental enrichments on performance and behavior properties of gestating sows. A total of 30 pregnant sows (Landrace) were assigned into three treatments that control, T1 (plastic device) and T2 (Rice straw). Period of trial was from Mar. 03. 18. to Mary 19. 18. The EE were allotted to center of experimental pen ($11.6{\times}6.0m$). Body weight (BW), backfat thickness (BF) and cortisol were identified at experimental initial or end date. Behavior was recorded during 24 hours on days 91 of gestation, and then analyzed the patterns. BF was reduced (15.73 vs. 16.56 mm; p>0.05) in T1 than control, but Ending BW, total litter size and alive piglets did not differ. Born dead piglets showed lower tendency (1.00 and 0.63 vs. 1.50 heads; p>0.05) in T1 and T2 than control. Similarly, the enrichments declined farrowing mortality (C, 8.68%; T1, 6.86%; T2, 3.40%; p>0.05). Cortisol was not differed among treatments. In the behavior characteristics, eating showed lower (1.81 vs. 9.68 and 6.99%; p<0.05) in T2 than control and T1. Furthermore, playing or digging were only observed (0.33 and 2.10%; p<0.05) in T1 and T2, respectively, whereas rubbing (0.91%, p<0.05) only showed in the control. These results suggest that the provision of EE would be not negatively affected the performance of the gestating sows and could be led to improvement of the livestock welfare.