• Korean Journal of Applied Biomechanics
• /
• v.18 no.4
• /
• pp.1-19
• /
• 2008

This research is to analyze the force on landing 3 Type of Halfpipe Curves(Ellipse, Circle, Brachistochrone) based on the mechanical calculation of normal force on a sloping surface. Jumping off a platform on a bard horizontal surface, the flexing of the legs, the softness of the snow, the angle of the landing surface, initial velocity and the forward motion of the snowboarder can contribute to reducing the force on landing. But halfpipe is significantly determined by the curvature of surface. It is definitely verified that the Brachistochrone curve is more safety than others. However currently using the Ellipse curve is mostly safe too. If we consider the efficiency of construction, we can easily think there is no use of another curves except normal ellipse curved halfpipe. It would better that geometrically verity curved halfpipe should be designed for improving fluent skills to snowboarders. This methode of research can be a model of scientifical research on sports safety how can sportsman reduce critical injury by designing optimal halfpipe facilities and manual.

• Journal of Wetlands Research
• /
• v.18 no.1
• /
• pp.100-112
• /
• 2016

In recent, the direction of water resources policy is changing from the typical plan for water use and flood control to the sustainable water resources management to improve the quality of life. This change makes the information related to water resources such as data collection, management, and supply is becoming an important concern for decision making of water resources policy. We had analyzed the structured data according to the purpose of providing information on water resources. However, the recent trend is big data and cloud computing which can create new values by linking unstructured data with structured data. Therefore, the trend for the management of water resources information is also changing. According to the paradigm change of information management, this study tried to suggest an application of big data and cloud computing in water resources field for efficient management and use of water. We examined the current state and direction of policy related to water resources information in Korea and an other country. Then we connected volume, velocity and variety which are the three basic components of big data with veracity and value which are additionally mentioned recently. And we discussed the rapid and flexible countermeasures about changes of consumer and increasing big data related to water resources via cloud computing. In the future, the management of water resources information should go to the direction which can enhance the value(Value) of water resources information by big data and cloud computing based on the amount of data(Volume), the speed of data processing(Velocity), the number of types of data(Variety). Also it should enhance the value(Value) of water resources information by the fusion of water and other areas and by the production of accurate information(Veracity) required for water management and prevention of disaster and for protection of life and property.

• Korean Chemical Engineering Research
• /
• v.46 no.2
• /
• pp.376-382
• /
• 2008

There are many accidents such as fire and explosion in laboratories that have caused a great loss to lives and property in spite of the effort to the enhancement of laboratory safety level for years. Development of laboratory safety management system is a necessary to improve safety level because the accidents of similar types have periodically occurred in laboratories. The laboratory safety management system may reduce many accidents and a serious loss in laboratory. In this study, we summarized major items for a risk management and safety improvement based on the analysis results of various accidents in the laboratories. And then the laboratory safety management system was developed containing a laboratory safety management manual, a laboratory management system, a education management system, a MSDS (material safety data sheet) management system and a laboratory safety audit system. It may have a potential application for the laboratory safety management in the chemical laboratories.

• Spatial Information Research
• /
• v.18 no.4
• /
• pp.23-32
• /
• 2010

Water mains underground facilities are essential components to make up urban infrastructure. In order to manage these water mains underground facilities systematically and scientifically, GIS (Geographic Information System) had been constructed. For the sake of construction of GIS for water mains underground facilities, an exact underground detection and the construction of DB (Data Base) for buried water mains underground facilities should be preceded. In this study, in order to find out the ways to improve exact detection rate of data, the statistical analysis for the causes of detection raw degradation was done, and standardization methods of detection through a case study were suggested, When water mains underground facilities were measured, the detection of non-metallic water pipes was not carried out. The reason was that the results of detection was uncertain and detection was difficult because the assessment of public measurements was vulnerable. Moreover, due to the absence of standardized operating regulations for detection, systematic surveys weren't conducted. In this study, methods to standardize works over the detection of water mains underground facilities were presented so that we can improve the detection rate when we are doing that. As the proposals to improve detection rate, effective performance assessment over non-metallic pipes were presented, and related issues to supplement work regulations of public survey were described systematically.

• Korean Security Journal
• /
• no.14
• /
• pp.43-67
• /
• 2007

This is the study of efficient security system for candidates for the 17th President. The president election will be held in 20 countries this year. As conflicts between interest groups are expected to emerge, they are afraid of accidental raid in the campaign tour in addition to revival of regionalism and possibility of confrontation between interest groups with issues of anti-FTA In our country. The purpose of this study is to suggest appropriate method through study of security system for president candidate as just 6 months are left for the 17th president election. Also this study covers security environment for the president election, principle of security, and theoretical study for cause of terror, security system domestic and abroad and its analysis and how to provide the efficient security for president candidate. Therefore first, for desirable security the security should be provided by professional org like president security department. Second, combined security for target by current rules should be done. Fourth, total security is necessary to prevent security threats in advance. Third, the public security should be provided for every president candidates. Fifth, example of secret service in America should be studied and economical security should be considered Sixth, we should increase the use of Security Company and martial artists.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.5
• /
• pp.543-551
• /
• 2006

Cold-formed steel studs that are being used as load-bearing members of wall panels for steel houses have a problem with their insulation due to the heat bridging of their web. Some additional thermal insulating materials should be used. To solve this problem, the new-concept hybrid stud, which consists of a galvanized steel sheet (t = 1.0 m - 12.0 m) and a GFRP panel (t = 4.0-6.0 mm), has recently been developed. An investigation on the structural behavior and the strength capacity of this new hybrid stud has been conducted so that it can be used in load-bearing wall panels of residential buildings. This paper describes the axial compression-torsion test results of the hybrid studs under both axial compression and torsion using ATTM. The main factors of the test were the stud length, the magnitude of the initial compressive force, and the loading method of the monotonic or cyclic loading. The torsion was applied increasingly while the initial compression was kept constant to the failure of the hybrid section. The advanced analysis results obtained form the finite element procedure that considered the material properties of the high-strength galvanized steel and the GFRP were compared with the test results for verification.

• The Korean Journal of Air & Space Law and Policy
• /
• v.19 no.1
• /
• pp.109-139
• /
• 2004

The first successful sustained powered flight by Wright Brothers was further extended to the rapid development of aviation technology, that led to transpacific flights, the invention of supersonic planes, and enabled hundreds of people to travel in the space, in addition to the fact that around 10 people had stepped on the moon, all of which were made possible within the very same century. However, on the back side of this most wondrous human technology, the vulnerableness to the aviation accident has been constantly accompanied with, right from the very beginning stage of the aircraft development. Moreover, the development of future aircraft is being focused on the aircraft performance, the increment of the number of passengers aboard and also its speed. In proportion to these phenomena of mega sizing the aircraft, the development of new technology and the increment of air traffic volume, the number of aviation accident is expected to augment, resulting in the enormous loss of human lives and properties. In order to prevent the disastrous aviation accident as such, it is essential to conduct the accident investigation in a specialized, systematic and scientific manner. In search for the method to attain the effective function of the aviation accident investigation organization, in this study, issues were examined as follows: The full-time Board Members and the establishment of an integrated investigation agency, The systematized security of status as an accident investigator, Inclusion of a human factors specialist in the investigator group organization, liability limit of an accident investigator Stipulation of the definition and the investigation scope of an accident and serious incident, along with the main body of conducting the investigation into the accident involving both civil and public aircraft, in the regulations related to the accident investigation.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.9 no.2
• /
• pp.171-182
• /
• 2007

For minimizing the effect on the focus of civil traffic and environment conditions related to the excavation at the traffic jamming points, an underground station tunnel was planned with 35.5 m in length and bigger area than $200\;m^2$ in sedimentary rock mass. It faced the case that the overburden was just under 13 m. Not based on a pattern design but on the case histories of similar projects and arching effect, the design of large section tunnel under shallow overburden was investigated on three design subjects which are shape effect on the section area, application method of support pressure, and supporting and tunnel safety. According to the mechanical effect from section shape, a basic design and a preliminary design was obtained, and then supporting method of large section was planned by the supporting of NATM and a pipe roof method for subsidence prevention and mechanical stability. From the comparative study between both designs, it was found that the basic design was suitable and acceptable for the steel alignment of tunnel lining, safety and the design parameter restricted by the limit considered as partition of the excavation facilities. Through the analysis result of preliminary design showing the mechanical stability without stress concentration in tunnel arch level, it also was induced that shape effect of the large section area and yielding load obtained from deformation zone in the surrounding rock mass of tunnel have to be considered as major topics for the further development of design technique on the large section tunnel.

• Korean Journal of Organic Agriculture
• /
• v.20 no.2
• /
• pp.185-200
• /
• 2012

It has been reported that world population continues to increase so that a matter of food security can be a world-wide problem for mankind. An anticipated rise in world population of 30% and the subsequent increased demand for food brings with it challenges in terms of global resource usage and food security. However, ruminant livestock production and consumption make a large contribution to the greenhouse gas (GHG) emissions which can be attributable to food production. Given the association between GHG and climate change, this is clearly of great concern to the livestock industry worldwide. Nevertheless, ruminant livestock also play an important role in global food security as they can convert the plant cell wall materials and non-protein nitrogen compounds, found widely in plants but indigestible to all monogastric animals including man, into high value proteins for human consumption. Much effort has been made to maximize animal production, feed conversion ratio, and to improve animal breeding in ruminant agriculture. In addition improving feed formulation techniques, developing chemical additives, plant extracts, and new plant varieties for grazing have been tested. Future ruminant production systems will need to capitalize on important benefits of ruminants. It is therefore suggested that ruminant agriculture has a key role to play in maintaining and enhancing provision of quality proteins and essential nutrients for human being but the challenge of reducing GHG emissions, and methane in particular, needs to be successfully addressed.

• Journal of the Korean Regional Science Association
• /
• v.33 no.1
• /
• pp.17-27
• /
• 2017

The purpose of this study is to analyze the determinants of start-ups by industry based on the theoretical background of entrepreneurship. For this purpose, regional industrial structure and local labor market structure are considered in order to focus on regional factors in addition to economic factors, income factors, and technological innovation factors. As an analyzed result, three theories of entrepreneurship generally agree with the determinants of industry - specific entrepreneurship. During the economic recession, the number of start-ups has increased. The intra-regional consumption and the local government expenditure per capita have also positive effects on the start-up. The incubation center has a positive effect on the start - up in the manufacturing sector. Therefore, the academic-industrial leading various incubation facilities should be activated in addition to the central or local government leading incubation centers, which is a part of the policy to support start-ups of central and local governments. In addition, population growth is a very important factor in terms of potential demand creation, and the characteristics of regional industrial structure and the effect of human capital within the region differ by industry. In the case of the manufacturing industry, the accumulation effect positively influences the start-up of the industry. In other service industries, the human capital variable had the greatest effect on the start-up when all other conditions are constant.