• Annual Conference of KIPS
• /
• 한국정보처리학회 2003년도 추계학술발표논문집 (상)
• /
• pp.115-118
• /
• 2003

최근 MOM 기술은 비즈니스 로직을 수행하는 애플리케이션 서버의 필수적인 구성요소로서 자리잡고 있으며, 보통 수백에서 수천의 클라이언트 요청을 처리할 수 있는 능력을 제공한다. MOM 은 이러한 대용량의 클라이언트 요청을 효과적으로 처리하기 위해서 효율적이고 확장성있는(스케일러블) 네트워크 모듈이 필요하며, 다양한 네트워크 프로토콜을 지원해야 한다. MOM이 기본적으로 지원하는 메시징 기능은 PTP(Point-To-Point)와 publish/subscribe 메시징 도메인으로 나뉘는데 이 논문에서는 두 가지 메시징 도메인과 그룹통신 메시징 서비스 기능을 동시에 지원하는 MoIM-Message 시스템의 하부 통신 모듈의 설계에 대해 기술한다. PTP와 publish/subscribe 메시징을 지원하기 위해 세가지 프리미티브 메시징 오퍼레이션인 "synchronous send", "synchronous receive", "asynchronous receive"를 정의하였으며 하부 통신 모듈 역할을 하는 메시지 트랜스포트 관리 계층내의 트랜스포트 관리자 내에 구현되었다. 트랜스포트 관리자는 다양한 트랜스포트 프로토콜을 적용할 수 있도록 하기 위해 트랜스포트 어댑터로 설계되었으며, 대량의 통신 요청을 효과적으로 처리하기 위해 "polling with multiple service thread model" 기법을 적용하여 구현되었다. 또한, 모바일 클라이언트 환경을 지원하기 위해 클라이언트 측 통신 모듈을 IPaq PDA 상에 포팅하였다. 본 논문에서 제안하는 세 가지 프리미티브 메시징 오퍼레이션을 제공하는 통신 모듈은 MOM이 기본적으로 지원해야 할 메시징 도메인과 대용량의 클라이언트 요청을 효율적으로 처리할 수 있는 구조를 가진다.es}8$ 모드를 모두 사용한 경우와 $8{\times}8$ 단일모드를 사용한 경우보다 계산 시간이 감소하였음을 확인하였다.행중인 MoIM-Messge서버의 네트워크 모듈로 다중 쓰레드 소켓폴링 모델을 적용하였다.n rate compared with conventional face recognition algorithms. 아니라 실내에서도 발생하고 있었다. 정량한 8개 화합물 각각과 총 휘발성 유기화합물의 스피어만 상관계수는 벤젠을 제외하고는 모두 유의하였다. 이중 톨루엔과 크실렌은 총 휘발성 유기화합물과 좋은 상관성 (톨루엔 0.76, 크실렌, 0.87)을 나타내었다. 이 연구는 톨루엔과 크실렌이 총 휘발성 유기화합물의 좋은 지표를 사용될 있고, 톨루엔, 에틸벤젠, 크실렌 등 많은 휘발성 유기화합물의 발생원은 실외뿐 아니라 실내에도 있음을 나타내고 있다.>10)의 $[^{18}F]F_2$를 얻었다. 결론: $^{18}O(p,n)^{18}F$ 핵반응을 이용하여 친전자성 방사성동위원소 $[^{18}F]F_2$를 생산하였다. 표적 챔버는 알루미늄으로 제작하였으며 본 연구에서 연구된 $[^{18}F]F_2$가스는 친핵성 치환반응으로 방사성동위원소를 도입하기 어려운 다양한 방사성의 약품개발에 유용하게 이용될 수 있을 것이다.었으나 움직임 보정 후 영상을 이용하여 비교한 경우, 결합능 변화가 선조체 영역에서 국한되어 나타나며 그 유의성이 움직임 보정 전에 비하여 낮음을 알 수 있었다. 결론: 뇌활성화 과제 수행시에 동반되는 피험자의 머리 움직임에 의하여 도파민 유리가 과대평가되었으며 이는 이 연구에서 제안한 영상정합을 이용한 움직임 보정기법에

• Journal of Technology Innovation
• /
• 제25권4호
• /
• pp.189-209
• /
• 2017

Financial institutions around the world, including financially advanced nations, widely operate a credit information sharing system to ease off information asymmetry between financial institutions and financial consumers. This study analyzed the credit problem data that is actually being shared among financial institutions in Korea, and classified credit problem data into three categories; Frequency, Period, Amount. In survival analysis, this study analyzed how different types of credit problem influence on survival period of companies. Next, in comparative analysis, this study verified a difference between start-up companies and existing companies on classified conditions of the credit problems. After conducting a survival and comparative analysis of the credit information of 449,579 companies of 8 years' actual information sharing in Korea, it showed that the number of the frequency of accidents showed a positive(+) correlation with the survival period. This provides contrary evidence to the financial institutions' risk policies that the number of the frequency of accidents is a negative factor. Furthermore, since the start-up companies that are under 7 years old show more positive aspect in the survival period than existing companies, it draws a policy implication that the credit information sharing system need to be improved by taking account of characteristics of the start-up companies.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• 제16권5호
• /
• pp.39-48
• /
• 2016

One of the major trends of automotive networking architecture is the introduction of automotive Ethernet. Ethernet is already used in single automotive applications (e.g. to connect high-data-rate sources as video cameras), it is expected that the ongoing standardization at IEEE (IEEE802.3bw - 100BASE-T1, respectively IEEE P802.3bp - 1000BASE-T1) will lead to a much broader adoption in future. Those applications will not be limited to simple point-to-point connections, but may affect Electric/Electronic(EE) Architectures as a whole. It is agreed that IP based traffic via Ethernet could be secured by application of well-established IP security protocols (e.g., IPSec, TLS) combined with additional components like, e.g., automotive firewall or IDS. In the case of safety and real-time related applications on resource constraint devices, the IP based communication is not the favorite option to be used with complicated and performance demanding TLS or IPSec. Those applications will be foreseeable incorporate Layer-2 based communication protocols as, e.g., currently standardized at IEEE[13]. The present paper reflects the state-of-the-art communication concepts with respect to security and identifies architectural challenges and potential solutions for future Ethernet Switch-based EE-Architectures. It also gives an overview and provide insights into the ongoing security relevant standardization activities concerning automotive Ethernet. Furthermore, the properties of non-automotive Ethernet security mechanisms as, e.g., IEEE 802.1AE aka. MACsec or 802.1X Port-based Network Access Control, will be evaluated and the applicability for automotive applications will be assessed.

• Economic and Environmental Geology
• /
• 제48권1호
• /
• pp.89-101
• /
• 2015

The sour gas is natural gas containing components such as hydrogen sulphide and carbon dioxide that form acids when mixed with water. Element sulfur precipitates from sour gas when reservoir pressure and temperature decrease. According to the International Energy Agency, about 43% of the world's natural gas reserves(2,580 tcf or 73.057 tcm), excluding North America, are sour. The sour gas is often derived from the Germanic word 'sauer or acidic' and the etymology referred to as 'sour'. Sour gas requires special handling and infrastructure because it contains significant amounts of hydrogen sulphide, making it highly corrosive, flammable and explosive, and there fore more costly and dangerous to process. So the business of sour gas is affected by two important factors: the economic value of the gas, and the methods used in its production. According to be analyzed in the academic literature to sour gas(2000~2014) by the program of 'web of science', the research activities 145 papers in sour gas.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제17권8호
• /
• pp.684-690
• /
• 2016

Cities are not built simply for amusement, but to tackle external factors faced by societies and built based on theoretical arguments. In order to construct a city and develop it, we have to understand the grounds and reasons for doing so, and have to think through how to build a city that corresponds with what contemporary societies are looking for. Therefore, this study identifies the philosophical implications by reviewing theories and compares these implications with the Urban Charters, in order to propose processes of change for the philosophy of city construction. As a result, it was found that cities are based on ideas that correspond to the common values of the era, within a frame of areas and relationships, under complicated sociological, economical and humanities environments. The results are supported through case studies of urban areas, buildings and facilities in the Administrative City in Korea. This study is meaningful because it establishes philosophies of city construction by comparing and analyzing their charters with the sociological phenomena in the 20th century, and because its research target is the Administrative City to which the philosophy of the 21st century's has been applied since the beginning of the construction. We have to take different points of view corresponding to the changes and development of cities.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제21권9호
• /
• pp.291-300
• /
• 2020

The cartridges used for illuminating a desired point or area are virtually limited in tests and evaluations because of limitations, such as noise during launch, the possibility of fires caused by illuminant charge, and the annual testable quantity. Therefore, to solve these problems, a ground fixed test, which replaces the firing test, or an evaluation method to perform limited tests, can be applied more efficiently. In this paper, the results of an 81mm illuminating cartridge, KM series performed in 2019 were analyzed comprehensively to identify the trends in reliability and quality characteristics and to estimate the shelf life. The shelf life was estimated to be at least 10 years based on the time when the lower confidence level reached 80% at a confidence level of 90%. Considering only major defects, the shelf life can be estimated to be approximately 23 years. On the other hand, the shelf life was estimated to be approximately 11 to 15 years and 25 to 28 years according to the effective illuminating time. Finally, an assessment plan of illuminating cartridges for the mortars was also presented as an improvement plan for an assessment method in the future.

• Tunnel and Underground Space
• /
• 제23권6호
• /
• pp.480-492
• /
• 2013

After the introduction of geothermal power generation technology based on engineering reservoir creation that can be applied on non-volcanic region, industrial need for studies on the efficient and economic execution of costly deep-depth drilling work becomes manifest increasingly. However, since it is very difficult to predict duration and cost of boring work with acceptable reliability because of many uncertain events during the execution, efficient and organized work management for drilling is not easily achievable. Especially, the round trip that discretely occurs because of the abrasion of bit takes more time as the depth goes deeper and it has a great impact on the work performance. Therefore, a technology that can simulate the occurrence timing and depth of round trip in advance and therefore optimize them is essentially required. This study divided the abrasion state of bit into eight steps for simulation cases and developed a forecast algorithm, i.e., TOSA which can analyze the depth and timing of round trip occurrence. A methodology that can divide a unit section for simulation has been suggested; while the Bourgoyne and Young model has been used for the forecast of drilling rates and bit abrasion extent by section. Lastly, the designed algorithm has been systemized for the convenience of the user.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 한국건설관리학회 2008년도 정기학술발표대회 논문집
• /
• pp.176-183
• /
• 2008

Recently, several large-scale Mega-Projects are being conducted. For these urban revitalization projects which requires many complex functions, the existing project management system based on single project level is limited in application. Therefore, our main objectives of this research are two 1) Develop a brand-new program management system(Prototype Ver 1.0) for mega-projects where various facilities are combined both horizontally and vertically. 2) Develop management strategies(Prototype Ver 1.0) based on the program level that enable the comprehensive management of a multiple various projects. The subtitles of this Research are i-PMIS(Program Management Information System) Development, Standardization & Optimization of Construction Life-Cycle Process, Comprehensive Project Cost & Process Management Technology, Effective and Optimized Integrated Performance Management Technology, and, we suggest to optimize the whole life cycle process, predict and respond to various risks, predict and control the process, the cost and the schedule, achieve maximum return on investment to the participating parties, and provide a brand-new Program-MIS including the visual-based web-portal platform to respond the changing business environments and decision making.

• Journal of Broadcast Engineering
• /
• 제8권4호
• /
• pp.410-426
• /
• 2003

MPEG-21 defines a digital item as an atomic unit lot creation, delivery and consumption in order to provide an integrated multimedia framework in networked environments. It is expected that MPEG-21 standardization makes it Possible for users to universally access user's preferred contents in their own way they want. In order to achieve this goal, MPEG-21 has standardized the specifications for the Digital Item Declaration (DID). Digital Identification (DII), Rights Expression Language (REL), Right Data Dictionary (RDD) and Digital Item Adaptation (DIA), and is standardizing the specifications for the Digital Item Processing (DIP), Persistent Association Technology (PAT) and Intellectual Property Management and Protection (IPMP) tot transparent and secured usage of multimedia. In this paper, we design an MPEG-21 terminal architecture based one the MPEG-21 standard with DID, DIA and DIP, and implement with the MPEG-21 terminal. We make a video summarization service scenario in order to validate ow proposed MPEG-21 terminal for the feasibility to of DID, DIA and DIP. Then we present a series of experimental results that digital items are processed as a specific form after adaptation fit for the characteristics of MPEG-21 terminal and are consumed with interoperability based on a PC and a PDA platform. It is believed that this paper has n important significance in the sense that we, for the first time, implement an MPEG-21 terminal which allows for a video summarization service application in an interoperable way for digital item adaptation and processing nth experimental results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제12권12호
• /
• pp.5477-5485
• /
• 2011

This study comparatively analyzed the instrumentation and the voicing structure, which were shown in the film music titled "Star Wars-Main Title" by John Williams(1932~), with analytical technique that the writer mapped out, and aimed to discover the progression principle in orchestration based on the results. Also, it applied a functional part-division method that was classified and distributed into 3 functional parts according to auditory cognitive level as for each of functional elements such as the musical element. And, it made it pattern for the vertical structure and the voicing structure in musical instruments, which were distributed to each functional part based on this, and comparatively analyzed the standard point in a change which were shown according to progression of music, namely, the operating technique. As for the results of this study, first, each theme has specific instrumentation pattern. Unity was emphasized by consistently organizing those things in exposition, reprise, and recapitulation of each theme. To reinforce diversity, an attempt was made such as adding and reducing auxiliary instruments in the middle part and the rear part. Second, even in a change of instrumentation pattern by passage in accordance with a change in theme amid each part, the same instrumental group was organized in the middle part, thereby having maintained unity. Third, to strengthen diversity by clause, which is forming each theme, a continuous change in voicing pattern was created by adding or omitting a part. Fourth, the voicing concentration was maintained the structure of "thinness-thickness" in the whole musical piece. However, in part 2 that is repeated theme 3, diversity was pursued with a unique change of "thickness-thickness." Fifth, in part 4 that is indicated theme 4, the other diversity was intensified with the inverted range in the front part and the middle part. Accordingly, based on the conclusions that were indicated in this work, it is desired to be conducive to understanding the horizontal consideration and the progression principle of orchestration.