• Journal of Korean Society of Transportation
• /
• v.35 no.1
• /
• pp.50-62
• /
• 2017

As the use of private cars increases along with the technological advancement in the automobile industries and their capabilities to supply, a wide range of issues are followed including the increase in traffic congestion costs, pavement damages and more. In spite of consistent effort to resolve such urban traffic problems, the modal share rate of private cars continuously increases, thus it is becoming more important to explore the ways to enable drivers to take reasonable measures, in self-motivated manner, by taking part of the transportation demand management policy rather than to rely on the strict enforcement of control policy. Considering that the urban transportation infrastructures are in much better shape than before, it is necessary to implement Mobility Management (MM) that induces reasonable usage of private cars by promoting the change in one's consciousness and behavior through communication. Hence, the research studies the factors that influence the mobility through the survey targeting the citizens of Busan on their awareness on the former transportation demand management policy, to explore the ways to motivate the citizens' involvement in reducing the use of private cars as a measure of Mobility Management.

• Journal of Internet Computing and Services
• /
• v.18 no.5
• /
• pp.31-38
• /
• 2017

Recently with the rapid development of LBS (Location-based Services) technology, approaches of protecting user's location have gained tremendous attentions. For using LBS, users need to forward their real locations to LBS server. However, if the user sends his/her real location to LBS server, the server will have the all the information about user in LBS. Moreover, if the user opens it to LBS server for a long time, the trajectory of user may be released. In this paper, we propose GTC (Grid-based Trajectory Cloaking) method to address the privacy issue. Different from existing approaches, firstly the GTC method sets the predicting trajectory and divides the map into $2^n*2^n$ grid. After that we will generate cloaking regions according to user's desired privacy level. Finally the user sends them to LBS server randomly. The GTC method can make the cost of process less than sequential trajectory k-anonymity. Because of confusing the departure and destination, LBS server could not know the user's trajectory any more. Thus, we significantly improve the privacy level. evaluation results further verify the effectiveness and efficiency of our GTC method.

• Journal of Energy Engineering
• /
• v.24 no.4
• /
• pp.183-191
• /
• 2015

Studies on the environment-friendly and permanent low energy saving measure are and will continue to be an eternal challenge. However, the demand is high for the technologies that can save energy significantly in everyday life that produce tangible benefits for the users by applying saving factors and that anyone can access easily when it comes the related procedure. Government policies related to the improvement of energy effect in the existing building structure are characterized by complex procedure. Moreover, cost required and reliability issue emerge when request is made to an expert. Accordingly, this study seeks to present energy improvement plan that can be utilized simply and conveniently at any place, any time by enabling customized design according to individual taste by enabling energy change amount and grade prediction when the users select only the part that they want to replace by using a simple program.

• The Journal of the Korea Contents Association
• /
• v.6 no.9
• /
• pp.98-107
• /
• 2006

By improving performance of mobile machine(3D engine, 3D accelerator chip set, etc) and developing wireless network technology, a demand for actual contents of users is being increased rapidly. But, there are some difficulties yet for the speedy development of actual contents because of the limitation of development resources that is dependent on each mobile device's different performance. In general, much of the animated character-creation work for mobile environment is still done manually by experienced animator with the method of key frame processing. However, it needs a lot of time and more costs for creating motion. Additionally, it is possible to cause a distortion of motion. In this paper, I solved the difficulties by using a optical motion capture system, it was able to acquire accurate motion data more easily and quickly, and then it was possible to make 3D dance contents efficiently. Also, I showed techniques of key reduction and controlling frame number for using huge amounts of motion capture data in mobile environment which requires less resources. In making 3D dance contents, using an optical motion capture system was verified that it was more efficient to make and use actual-reality contents by creating actual character motion and by decreasing processing time than existing method.

• The Journal of the Korea Contents Association
• /
• v.15 no.2
• /
• pp.363-369
• /
• 2015

Chronic pain is one of the leading causes of hospital visits. It not only affects the patients themselves but also has a major negative impact on their families and society. In this study, we investigated epidemiology of musculoskeletal disorders induced chronic pain among general population based on Korea National Health and Nutrition Examination Survey database and also analysed how it influenced on the use of medical services. This study was done by using the data of 5th Korea National Health and Nutrition Examination Survey (KNHANES V), taking aged 20 years and over adults as research subjects. The EuroQoL-5 Dimension Index(EQ-5D) was used as a survey instrument. T-test, chi-square test and multivariate logistic regression were used for statistical analysis. Subjects with chronic pain had a higher likelihood than control group to use medical services(odds ratio : 5.858, confidence interval 3.636-9.438). Controlling for existence of chronic pain, more women were likely to use medical services than men(1.156, 0.707-1.889). Age, gender and household income level did not affect the use of medical services. Proper control of chronic pain is very helpful in improving patient's quality of life and it also accounts for a large proportion in suppressing excessive consumption of medical services. Anesthesia and pain medicine specialists have superior knowledge about analgesics and anticonvulsants than other physicians do and also have specialized skills to perform procedures like nerve blocks in treating chronic pain. Therefore Anesthesia and pain medicine specialists need to play a leading role in managing chronic pain.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.1
• /
• pp.20-26
• /
• 2015

Ceramic ink-jet printing technology in art tiles, decorated tablewares and other porcelain products has many advantages of fast and precision printing of various images with high efficiency and low cost. For the application to ink-jet printing, ceramic ink requires a stable dispersibility with nano-sized pigments. In this paper, characteristics of pink-red aqueous ceramic ink for ink-jet printing was demonstrated. $CaCr_{0.1}Sn_{0.8}SiO_5$ pigment was synthesized using solid state reaction and deagglomerated using attrition milling. The aqueous ceramic ink contains 10 wt% of the obtained $CaCr_{0.1}Sn_{0.8}SiO_5$ nanopigment with 0.4 wt% of sodium dodecyl sulfate (SDS) as a dispersion agent. Viscosity of $CaCr_{0.1}Sn_{0.8}SiO_5$ aqueous ceramic ink was adjusted using 0.18 wt% of polyvinyl alcohol (PVA) for a suitable jetting from the nozzle. The prepared pink-red ceramic ink showed a good jetting property with formation of a single sphere-shaped droplet after $180{\mu}s$ without a tail and satellite droplet.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.19 no.2
• /
• pp.98-106
• /
• 2016

Remote sensing is an efficient technology for observing and monitoring the land surfaces inaccessible to humans. This research proposes a methodology for improving the accuracy of the land cover classification using the Landsat-8 operational land imager(OLI) image. The proposed methodology consists of the following steps. First, the normalized difference vegetation index(NDVI) and normalized difference water index(NDWI) images are generated from the given Landsat-8 OLI image. Then, a new image is generated by adding both NDVI and NDWI images to the original Landsat-8 OLI image using the layer-stacking method. Finally, the maximum likelihood classification(MLC), and support vector machine(SVM) methods are separately applied to the original Landsat-8 OLI image and new image to identify the five classes namely water, forest, cropland, bare soil, and artificial structure. The comparison of the results shows that the utilization of the layer-stacking method improves the accuracy of the land cover classification by 8% for the MLC method and by 1.6% for the SVM method. This research proposes a methodology for improving the accuracy of the land cover classification by using the layer-stacking method.

• International Commerce and Information Review
• /
• v.13 no.1
• /
• pp.29-52
• /
• 2011

A predictable and manageable output is desirable for most businesses. However, it is very difficult to control the quality and quantity of products in the food and agriculture business. Predictable outputs help managers plan their marketing, sales, and inbound and outbound logistics, but these are not easy to achieve in the food and agriculture business. Various industries have adopted different levels of automation and utilization of information systems for quality/quantity control; however e-Commerce of the food and agriculture industry is far behind those of other industries. Today, the food and agriculture industry is supposed to be more integrated than ever in order to reduce risks and improve processing costs, from farm to table. Since its operations including production, processing, storage, distribution, and management are dispersed all over the world, the food and agricultural industries now depend more on IT than other industries. This study attempts to develop a framework to analyze the current situation of agricultural product e-Commerce in Korea, and finds out the actual situation of the farmers operating on-line shopping systems through the developed framework and suggests some improvements.

• Journal of Aerospace System Engineering
• /
• v.11 no.5
• /
• pp.65-75
• /
• 2017

This study proposes development of 3U CubeSat standard platform whose function and performance are verified via KAUSAT-5 development. 3U CubeSat platform specification was selected for the design of 3U Cubesat standard platform by examining existing CubeSat and state-of-art technology, and consequently a universally usable 3U CubeSat platform was designed. Standard platform was manufactured in 1.5U size and developed with a modular concept to be able to add and expand payloads and ADCS actuators for meeting the user's needs. In addition, in case of the power system, the solar panel, the battery, and the deployment mechanism are designed to be configured by the user. In the mechanical system design of a standard platform, subsystem and micro equipment functions/performance could be integrated and miniaturized on micro-sized PCBs and maximized electrical capability to accommodate multiple payloads. In the development of the 3U CubeSat, the satellite platform adopts the developed standard platform, which can reduce the cost and schedule for the whole satellite development by reducing the additional function verification.

• Journal of Convergence for Information Technology
• /
• v.7 no.4
• /
• pp.105-111
• /
• 2017

With the emergence of the fourth industrial revolution, more and more attempts have been made to apply IoT technology to the manufacturing process and launch the product. In this paper, we propose IoT authentication scheme based on hash chain which can easily apply IoT device to small and medium enterprises in Korea. In the proposed method, the companies that installed IoT devices suitable for the manufacturing environment are selected to maintain the linkage between IoT devices so that product information and release information can be efficiently collected and managed during the entire manufacturing process. In addition, the proposed scheme is characterized in that it does not require an additional encryption / decryption algorithm because the authentication information of the IoT device is constructed based on a hash chain. As a result of the performance evaluation, the efficiency of the manufacturing process was improved by 18.5% and the processing of the manufacturing process with the IoT device was shortened by 20.1% on the average according to the application of the IoT device. In addition, the labor cost reduction costs in the manufacturing process decreased by an average of 30.7%.