• The Journal of Engineering Geology
• /
• v.29 no.2
• /
• pp.85-97
• /
• 2019

It can be observed that steep slopes ($65^{\circ}$ to $80^{\circ}$) consist of rock masses were kept stable for a long time. In rock-mass slopes with similar ground condition, steeper slopes than 1 : 0.5 ($63^{\circ}$) may be applied if the discontinuities of rock-mass slope are distributed in a direction favorable to the stability of the slope. In making a decision the angle of the slope, if the preliminary rock mass conditions applicable to steep slope are quantitatively setup, they may be used as guidance in design practice. In this study, the above rock mass was defined as a good continuum rock mass and the quantitative setup criterion range was proposed using RMR, SMR and GSI classifications for the purpose of providing engineering standard for good continuum rock mass conditions. The methods of study are as follows. The stable slope at steep slopes ($65^{\circ}$ to $80^{\circ}$) for each rock type was selected as the study area, and RMR, SMR and GSI were classified to reflect the face mapping results. The results were reviewed by applying the calculated shear strength to the stable analysis of the current state of rock mass slope using the Hoek-Brown failure criterion. It is intended to verify the validity of the preliminary criterion as a rock mass condition that remains stable on a steep slope. Based on the analysis and review by the above research method, it was analyzed that a good continuum rock mass slope can be set to Basic RMR ${\geq}50$ (45 in sedimentary rock), GSI and SMR ${\geq}45$. The safety factor of the LEM is between Fs = 14.08 and 67.50 (average 32.9), and the displacement of the FEM is 0.13 to 0.64 mm (average 0.27 mm). This can be seen as a result of quantitative representation and verification of the stability of a good continuum rock mass slope that has been maintained stable for a long period of time with steep slopes ($65^{\circ}$ to $80^{\circ}$). The setup guideline for a good continuum rock mass slope will be able to establish a more detailed setup standard when the data are accumulated, and it is also a further study project. If stable even on steep slopes of 1 : 0.1 to 0.3, the upper limit of steep slopes is 1 : 0.3 with reference to the overseas design standards and report, thus giving the benefit of ensuring economic and eco-friendlyness. Also, the development of excavation technology and plantation technology and various eco-friendly slope design techniques will help overcome psychological anxiety and rapid weathering and relaxation due to steep slope construction.

• Journal of Korean Home Economics Education Association
• /
• v.19 no.3
• /
• pp.61-76
• /
• 2007

The purpose of the study is to identify and understand problems existing in the middle school home economics practice rooms in Jeju Special Self-Governing Province. The findings are based on the examination and the analysis of the indoor environment and the condition of the facilities and equipment. Study method employs on-site research and a survey. The on-site research was conducted about temperature, humidity, intensity of illumination, and status of teaching instrument in 10 out of 41 middle schools in Jeju Special Self-Governing Province from August 16 to September 30, 2006. Meanwhile, the survey was implemented by mail for 95 teachers in charge of manual training and home economics education in 41 middle schools in Jeju from November 1 to 23, 2005. 64 questionnaires out of total 95 were collected, including those collected during the period of on-site research. Finally, 61 questionnaires which were effective among the answered ones were used for analysis. Collected materials were analyzed with the SPSS Win.12.0 program for frequency, percentile analysis. In conclusion, the study determines that the condition of the home economics practice rooms of the middle school in JSSGP in terms of temperature, humidity, lighting and ventilation is very inadequate. The structure of the practice room represents an inefficient work flow pattern. Further, the facilities and equipment are in a very poor condition because the facilities are old and the retention rate of teaching tools is low. Therefore, to address these problems, the study suggests that improvements on the facilities and equipment should be made and teaching tools should be replenished in accordance with the industry standard.

• Journal of The Korean Association For Science Education
• /
• v.35 no.1
• /
• pp.53-64
• /
• 2015

This research was performed of high school science classes. These science classes progressed by using Scratch, and surveyed students' perception after finishing each class. This research was conducted of male students who want to choose department of natural science in the next grade. Those classes are consisted of four classes. This study produced a journal, and contained expressions of their thinking and feeling based on experiences during attending classes and projects. Consequently, that journal was analyzed in view of understanding and perception of Scratch using science classes, and it was also included of utilizing Scratch program. Research shows following three conclusions. First, students preferred Scratch using class to general one. They attend more active with high interest, and they felt senses of accomplishment while they make output by themselves. Second, their studies passed through three stages. These are problem perception, problem solving, and producing. Problem solving stage is especially complicated and difficult stage to students. This stage is consisted of Scratch side and Science side. Scratch side has Design and applying process, and Science side has data gathering and analyzing. Students' comprehension of scientific knowledge is increased and is preserved long time through this stage. Last, students had a hard time using Scratch. Because, it is the first time to them to use that program. Therefore, we deemed that they needed to start this kind of experience at lower grade than they are now, such as middle school stage. It is expected that this type of classes are getting more expanded and more populated as a part of students' core ability.

• Journal of Korean Home Economics Education Association
• /
• v.30 no.3
• /
• pp.67-90
• /
• 2018

The purpose of this study was to develop and apply the practical problem-based teaching·learning process plan for 'interacting with neighbors' of home economics subject. The plan consisting of 3 lessons has been developed and implemented according to the ADDIE model. Various activity materials (7 student's activity sheets, 3 reading texts, 1 homework sheet, 3 sets of ppt, 6 videos, and 3 teacher's reading texts) as well as questionnaire were developed for the 3-session lessons. The plans were implemented by the researcher to 204 freshmen, 8 classes, of C middle school in Seoul during september, 2017. The result, of students' lower level of actual participation in interacting with neighbors comparing to their interests in, supported the need of this study. Students were satisfied with the whole 3-lessons in the aspects such as beneficial usage of the contents in their daily life and in building the sense of community, as well as adequacy of materials and activities. Students also reported that they would highly aware to the importance of interacting with neighbors and to practice the contents learned from the lessons in daily life at community. They had an opportunity to reflect one's own attitude to neighbors and recommended to teach it to other schools, too. It can be concluded that the teaching·learning process plan for 'interacting with neighbors' would raise students' housing values living together and attain the overall objective and achievement standards of 2015 home economics middle school curriculum.